The Journal of the Korean dental association (대한치과의사협회지)

The Korean Dental Association (대한치과의사협회)
권호 표지

Suitable scanning procedures for various prosthodontic treatments and the utilization of intraoral scanner

임상가를 위한 특집 3 - 여러 보철 치료 술식에 따른 바른 스캐닝 과정과 구강스캐너의 활용

  • Park, Ji-Manm (Department of Dentistry, School of Medicine, Ewha Womans University) ;
  • Park, Eun-Jin (Department of Dentistry, School of Medicine, Ewha Womans University) ;
  • Heo, Seong-Joo (Department of Prosthodontics, School of Dentistry, Seoul National University)
  • 박지만 (이화여자대학교 의학전문대학원 치과학교실) ;
  • 박은진 (이화여자대학교 의학전문대학원 치과학교실) ;
  • 허성주 (서울대학교 치의학대학원 치과보철학교실)
  • Received : 2014.05.21
  • Accepted : 2014.05.27
  • Published : 2014.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

With the development of digital dentistry, various intra-oral scanners which acquire intraoral image without conventional impression taking and stone pouring steps have been introduced. Fixed dental prostheses such as inlay, onlay, crown, and bridge fabricated by CAD/CAM technique combined with digital impressions is getting popular due to the recent rapid progress of digital impression taking system. In comparison with traditional prosthetic procedure, the advantages of intraoral image acquiring and CAD/CAM technique are as follows; the omission of conventional impression materials, reduced workflow step, and increased efficiency by online communication with clinic and laboratory. This review article covers some opinions about the suitable scanning procedures for the various prosthodontic treatments and the utilization of digital intraoral scanner and CAD/CAM system.

Keywords

References

  1. Fasbinder DJ. Clinical performance of chairside CAD/CAM restorations. J Am Dent Assoc 2006;137:22S-31S.
  2. Syrek A, Reich G, Ranftl D, Klein C, Cerny B, Brodesser J. Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling. J Dent 2010;38:5553-9.
  3. Mormann WH, Bindl A. The Cerec 3--a quantum leap for computer-aided restorations: initial clinical results. Quintessence Int 2000;31:699-712.
  4. Garg AK. Cadent iTero's digital system for dental impressions: the end of trays and putty? Dent Implantol Update 2008;19:1-4.
  5. Hong YS, Park EJ, Kim SJ, Kim MR, Heo SJ, Park JM. Customized abutment and screw-type implant prostheses after cementation based on the digital intra-oral impression technique. J Korean Acad Prosthodont 2012;50:67-73. https://doi.org/10.4047/jkap.2012.50.1.67
  6. Chua CK, Leong F, Lim CS. Rapid prototyping: Principles and Applications. 1st ed. Singapore : World Scientific: 2010. p. 35-300.
  7. Han J, Wang Y, Lu P. A preliminary report of designing removable partial denture frameworks using a specifically developed software package. Int J Prosthodont 2010;23:370-5.
  8. Eggbeer D, Bibb R, Williams R. The computer-aided design and rapid prototyping fabrication of removable partial denture frameworks. Proc Inst. Mech Eng H 2005;219:195-202.