• 복식
• /
• 제51권8호
• /
• pp.159-170
• /
• 2001

The culture and society environment plays major role in the development of Fashion and now in the 21st century, interest in Fashion is getting increased along with the rapid progress of advanced media development and information surge. Now it s the time to extend visual efficiency not only transmitting fashion image but also develop a creative product that satisfy the demander s needs. Currently it is very hard to express our subjective Korean "nationalism" in the Fashion since the various expression skill using western fashion illustration are dominant in our society. I have classified two components, fashion illustration and Korean painting in the theoretical circumstance. In fashion illustration circumstance, I examined the concept, usage, expression skill and history referring to historical documents. In Korean painting section, I considered coloring portrait concept, pattern, history, concept, and feature of the four gentlemanly plants. including the basic material of Korean-paper, Writing- Brush, Ink-Stone, Traditional-ink and also the history of itself. I have designed 8 products applying the concept of plum blossoms, orchids, chrysanthemums and bamboos that represent the most important part of the four gentlemanly plants, and also the expression skill of Korean coloring portrait.rait.

• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.788-791
• /
• 2004

입자크기가 수 nm인 고농도 은 나노 졸을 이용하여 잉크젯 기법으로 은 미세라인을 형성하고자 하였다. 고분자전해질을 사용하여 합성한 $10wt\%$ 농도의 은 나노 졸의 입자크기는 10nm 이하였으며, 은 나노 졸을 이용한 미세 라인의 인쇄특성은 은 나노 졸의 접촉각에 매우 깊은 관계를 갖고 있었다. 순수한 ITO 기판에서 은 나노 졸은 높은 접촉각을 나타내었으며, dot 형상이 나타났다. 그러나 100ppm의 Polyethylenimine(PEI)을 코팅한 ITO 기판은 젖음성이 크게 개선되었으며, 잉크젯 기법을 이용하여 $60\~100{\mu}m$의 선폭을 갖는 은 나노 졸의 미세라인 형성이 가능함을 확인할 수 있었다.

• 펄프종이기술
• /
• 제38권2호
• /
• pp.16-21
• /
• 2006

Uneven ink transfer of a print can be traced to several causes such as an incomplete contact between the paper surface and ink film, a coarse pattern of a continuous ink film after transfer, uneven absorption, etc. Uneven ink transfer was studied in this points by the Tollenaar. Uneven distributions of printed density are reflected in low ${\ulcorner}m{\lrcorner}$ values of the print. Tollenaar's smoothness coefficient ${\ulcorner}m{\lrcorner}$ value was important factor that deciding printed quality which was easily obtain by densitometry. Limiting print density $D_{\infty}$ that obtained Tollenaar's formulation working as a influence factor at the printed quality. In this study, we obtained limiting print density $D_{\infty}$ and smoothness coefficient ${\ulcorner}m{\lrcorner}$ value of domestic newspapers and foreign newspapers. And we analyzed about properties of the newspaper. The result of this study, smoothness coefficient ${\ulcorner}m{\lrcorner}$ value and limiting print density $D_{\infty}$ showed the good results in the low porosity and low roughness newspaper. Datum which obtained by this study was used as printability factor for the quality control and improvement of domestic newspaper and wished to apply as a basic data for the domestic newspaper quality.

• 전기학회논문지P
• /
• 제65권2호
• /
• pp.142-150
• /
• 2016

This paper developed new manufacture process technology of slim type flexible flat lighting product used lower power white LED. Flexible flat lighting is applied to letter sign lighting, traffic lighting, interior wall lighting, flat lighting, aquarium back lighting, wreath light etc. Main manufacture process technology were developed drawing software for electronics circuit, inkjet electronic circuit pattern and inkjet white ink coating. For pattern printing it was utilized for piezoelectonic inkjet head printing technology. Also high vacuum pressure laminating technology was waterproofing for LED flat lighting protection. Hence, form process technology we were manufactured for flexible flat lighting product of the power 12 W, input voltage 48 V and plane size $480{\times}480mm$. It acquired a these validity from experiment results.

• 한국재료학회지
• /
• 제25권12호
• /
• pp.719-726
• /
• 2015

For a decade, solution-processed functional materials and various printing technologies have attracted increasingly the significant interest in realizing low-cost flexible electronics. In this study, Cu nanoparticles are synthesized via the chemical reduction of Cu ions under inert atmosphere. To prevent interparticle agglomeration and surface oxidation, oleic acid is incorporated as a surface capping molecule and hydrazine is used as a reducing agent. To endow water-compatibility, the surface of synthesized Cu nanoparticles is modified by a mixture of carboxyl-terminated anionic polyelectrolyte and polyoxylethylene oleylamine ether. For reducing the surface tension and the evaporation rate of aqueous Cu nanoparticle inks, the solvent composition of Cu nanoparticle ink is designed as DI water:2-methoxy ethanol:glycerol:ethylene glycol = 50:20:5:25 wt%. The effects of poly(styrene-co-maleic acid) as an adhesion promoter(AP) on rheology of aqueous Cu nanoparticle inks and adhesion of Cu pattern printed on polyimid films are investigated. The 40 wt% aqueous Cu nanoparticle inks with 0.5 wt% of Poly(styrene-co-maleic acid) show the "Newtonian flow" and has a low viscosity under $10mPa{\cdots}S$, which is applicable to inkjet printing. The Cu patterns with a linewidth of $50{\sim}60{\mu}m$ are successfully fabricated. With the addition of Poly(styrene-co-maleic acid), the adhesion of printed Cu patterns on polyimid films is superior to those of patterns prepared from Poly(styrene-co-maleic acid)-free inks. The resistivities of Cu films are measured to be $10{\sim}15{\mu}{\Omega}{\cdot}cm$ at annealing temperature of $300^{\circ}C$.

• 한국통신학회논문지
• /
• 제42권4호
• /
• pp.716-722
• /
• 2017

본 논문에서는 은 나노 분말과 카본 잉크를 이용하여 13.56 MHz에서 동작하는 완전 인쇄형 NFC 태그를 설계 및 제작하였다. 제안된 NFC 태그는 50 pF의 내부 커패시턴스를 갖는 NFC 태그 IC에 적용하기 위해서, $2.74{\mu}H$의 인덕턴스를 갖는 원형 코일을 PI 필름 위에 설계하였으며, 전통적인 회로 제작 방식인 PCB 제조 공정에 비해 대면적 및 대량 생산, 저비용, 친환경공정 등의 장점을 가진 인쇄 전자 기술인 스크린 프린팅 기법을 이용하여 제작하였다. 제안된 구조는 단일 층으로 구현된 원형 코일, 코일 외곽과 중심부 사이에 칩 실장을 위한 점퍼 패턴, 그리고 코일과 점퍼 패턴과의 절연을 위한 절연 패턴으로 구성되어 있으며, 은 나노 분말과 카본 잉크를 이용하여 전도성 패턴과 절연 패턴을 중첩 인쇄하여 구현하였다. 본 논문에서 제안된 NFC 태그의 성능 검증을 위해 인쇄선폭, 두께, 선저항, 밀착력 그리고 환경 신뢰성 평가 등을 수행하였으며, 완전 인쇄형 제작 방식 기반 NFC 태그의 적합성을 확인하였다.

• 한국의상디자인학회지
• /
• 제6권1호
• /
• pp.25-33
• /
• 2004

This study is aimed at reviewing how the Orientalism trend is expressed in the modem fashion in terms of silhouette, color, materials, and detail. To this end, the geographic scope of this study is limited to China, Japan, Korea, while data are collected from fashion collections, domestic and foreign magazines since 2000's, literature, and internet sites. The results of this study can be summarized as follows: 1. Silhouette: the basic square silhouette of the Oriental traditional costume do not disturb the body movement and have an effected on design to smoothly follow the body line rather than cutting out materials into several parts or emphasize the curved body. 2. Color: due to the influence of the Oriental Zen thought, color trend seems to pursue simplicity rather than complexity, and natural aesthetics. In addition, the Oriental colorfulness shall not be ignored. 3. Materials: golden embroidered material, polished satin, jersey, tough or rough materials, etc. have used with materials of the Oriental traditional costume came into fashion. In pattern, the Orientalism trend is expressive of pattern by Chinese ink-spread technique, simple brush touch technique, cloud pattern, lotus flower pattern or dragon pattern, all of which feature the Oriental calm aesthetics or those motivated by the Oriental traditional patterns. 4. Detail: the techniques of handicrafts and manual arts such as meticulous embroidery, tassel or patchwork reflect well the Orientalism trend in the modem fashion.

• 대한수의학회지
• /
• 제24권1호
• /
• pp.8-16
• /
• 1984

The work was conducted with tole purpose of investigation on the development pattern of epididymis in accordance with the growth of meat-type cockerels. 1. Histological features of various ductules in epididymis of the cockerel on the age of weeks were as follow: within 10 weeks after hatching rete testis and connecting ductules were well developed but efferent ductules were observed in immature form. During 10th to 20th week, the lining epithelium of various ductules in epididymis was in the developing stage near to the mature form. From 21th week, various ductules were abruptly matured. Lumen of rete testis was lined by simple squamous or simple columnar epithelial cells and that of efferent ductules, having many folds and being larger than any others, were lined by ciliated pseudostratified columnar epithelium with ciliated columnar cells, clear cells and basal cells were noted. Luminal epithelium of connecting ductules was composed of ciliated low pseudostratified columnar epithelial cells, ciliated columnar cells, clear cells and basal cells. The luminal surface of epididymal ducts was pseudostratified columnar epithelium and which was composed of high columnar cells and basal cells. 2. In the India ink absorption test, India ink granules were noted above the nucleus of some cells in the efferent ductules and the connecting ductules at 7 hours after administration of India ink to the mature epididymis, but not absorbed in the other ductules. The granules reactive to acid phosphatase were most abundant in some epithelial cells of efferent ductules and connecting ductules, especially above the nucleus of cells. The granules reactive to alkaline phosphatase were noted on the luminal border of efferent ductules. The granules reactive to PAS were scattered in the epithelial cells of efferent ductules and connecting ductules.

• 폴리머
• /
• 제34권5호
• /
• pp.450-453
• /
• 2010

Iron(III) p-toluenesulfonate(FTS)를 개시제로 한 pyrrole의 중합에서 용액 중합법(LPP)과 기상 중합법(VPP)으로 제조된 PPy 박막의 전기/광학적 특성 및 표면구조를 비교하였다. LPP에 비해서 VPP 방법으로 제조된 PPy 박막은 우수한 전기적 특성을 보여주었다. 표면 특성분석을 이용하여 제조된 PPy 필름의 표면 모폴로지와 표면저항과의 상관관계를 검토하였다. VPP 방법으로 제조된 PPy 박막의 표면이 LPP로 제조된 것보다 평탄하였다. VPP를 응용한 잉크젯 프린팅과 소프트 리소그래피를 사용하여 미세 패턴된 PPy 박막을 효과적으로 제조할 수 있었다.

• 한국전자파학회논문지
• /
• 제23권1호
• /
• pp.131-134
• /
• 2012

기존 바코드와 RFID가 동시에 인식이 가능한 UHF 대역에서 동작하는 바코드 형태의 RFID 태그 안테나를 은색 도전성 잉크로 설계 및 제작하였다. 바코드는 일반 종이 박스에서 흔히 볼 수 있는 바코드를 샘플 바코드로 사용하였으며, 바코드에서 물품 코드 모양을 활용하여 UHF 대역의 RFID 태그 안테나를 설계 및 제작하였다. 제작 방법은 도전성 실버 잉크를 사용하여 T-매칭 방식을 채택하여 설계하였다. 제작된 태그는 바코드 인식 환경과 UHF 대역 RFID 인식 환경을 모두 만족할 수 있게 제작하였다. 태그의 반사 계수와 인식 거리의 패턴을 측정하였다. 인식 거리는 111 cm로 만족함을 보였다.