• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.459-467
• /
• 2016

Due to the limited areal space for installation, borehole heat exchangers (BHEs) at depths deeper than 300 m are considered for geothermal heating and cooling in the urban area. The deep vertical closed-loop BHEs are unconventional due to the depth and the range of the typical installation depth is between 100 and 200 m in Korea. The BHE in the study consists of 50A (outer diameter 50 mm, SDR 11) PE U-tube pipe in a 150 mm diameter borehole with the depth of 300 m. In order to compensate the buoyancy caused by the low density of PE pipe ($0.94{\sim}0.96g/cm^3$) in the borehole filled with ground water, 10 weight band sets (4.6 kg/set) were attached to the bottom of U-tube. A thermal response test (TRT) and fundamental basic surveys on the thermophysical characteristics of the ground were conducted. Ground temperature measures around $15^{\circ}C$ from the surface to 100 m, and the geothermal gradient represents $1.9^{\circ}C/100m$ below 100 m. The TRT was conducted for 48 hours with 17.5 kW heat injection, 28.65 l/min at a circulation fluid flow rate indicates an average temperature difference $8.9^{\circ}C$ between inlet and outlet circulation fluid. The estimated thermophysical parameters are 3.0 W/mk of ground thermal conductivity and 0.104 mk/W of borehole thermal resistance. In the stepwise evaluation of TRT, the ground thermal conductivity was calculated at the standard deviation of 0.16 after the initial 13 hours. The sensitivity analysis on the borehole thermal resistance was also conducted with respect to the PE pipe diameter and the thermal conductivity of backfill material. The borehole thermal resistivity slightly decreased with the increase of the two parameters.

• Reproductive and Developmental Biology
• /
• v.31 no.1
• /
• pp.35-41
• /
• 2007

This study was conducted to examine the effects of energy substrates in different conoentration of carbohydrates in the human oviduct and uterus on the in vitro development of mouse 2-cell embryos. Two-cell embryos were collected from ICR female mice at $46{\sim}50\;hr$ after 5 IU hCG injection and cultured in three different media [control: 0 mM, Guoup A: glucose (G) 0.5 mM + pyruvate (P) 0.32 mM + lactate (L) 10.5 mM, Group B: G 3.15 mM + P 0.1 mM + L 5.83 mM] for 72 hr. Rates of morula formation of group A (72.3%) and B (56.6%) were significantly higher higher (p<0.05) than that of control (34.9%) at 24 hr. However, blastocyst rate was significantly higher (p<0.05) in control (51.8%) than group A (39.8%) and B (28.9%) at hr. At 72 hr, no differences were found in the number of zona-intact, zona-escape and total blastocysts among groups. Mean and ICM cell numbers were significantly higher (p<0.05) in group A (78.0, 13.4) and B (64.4, 11.8) than control (53.1, 5.7), respectively, The percent of ICM were significantly higher (p<0.05) in group A (22.9%) and B (23.7%) than control (14.2%). No differences were round in the TE cell numbers ($34.1{\sim}45.1$). The ICM:TE ratio was significantly higher $34.1{\sim}45.1$ in control (1:6.0) than group A (1:3.4) and B (1:3.4). This study shows that energy substrates added to culture media especially, the oviductal level of carbohydrates increase the developmental capacity of 2-cell mouse embryos.

• Korean Journal of Occupational Health Nursing
• /
• v.7 no.2
• /
• pp.143-154
• /
• 1998

The purpose of this research is to suggest basic materials for the practical infection precaution program to protect health care workers from hospital infection by grasping their compliance level of Universal Precautions and examining the factors affecting them. The number of the health care workers we studied were 486, including the doctors, the nurses, and the lab technicians who were working in a university hospital. The period of this research was from Aug. 18th, 1997 to Aug. 30th, 1997. The method of the study was to measure the compliance level of Universal Precautions with the item of "Universal Precautions" established by CDC in 1987, and examine the questionnaire of 52 questions dividing related factors into socio-populational, individual, socio-psychological and organizational management ones. The data was analyzed by t-test. ANOVA, and chi-square test. The results were as follows : 1. An the compliance level of Universal Precautions, hand washing had the highest score(85.4%), and doctors(18.9%), nurses(44.0%), and lab technicians(7.6%), had a low compliance level in the safe handling of an injection syringe, and item not to handle patients and their samples when the subject suffered from dermatitis or injury had the lowest score of 17.1%. 23.3% of them said that they wear protection gown, goggles and mask. 2. Female's Compliance level of Universal Precautions Was higher than male. 3. The health care workers who had high recognition on Universal Precautions got significantly higher compliance level of Universal Precautions than those have low recognition on Universal Precautions(P<0.001). 4. The health care workers experienced a needle stick injury had a significantly higher compliance level of Universal Precautions than those who had not(P<0.000). 5. The health care workers who had infection protection education got a significantly higher compliance level of Universal Precautions than those who didn't(P<0.000). 6. The health care workers who had a firm belief in the effect of Universal Precautions got a higher compliance level of Universal Precautions than those who didn't. 7. The health care workers who had less conflicts between treating patient arid protecting them-selves got a higher compliance level of Universal Precautions than others with many conflicts. 8. The health care workers who had a high score in organizational management factors got a significantly higher compliance level of Universal Precautions than those with a low score(P<0.000). 9. Only 16.9 percent of the all respondents(82 in number) answered that they knew well or a little about the Universal Precautions, which is very low rate of recognition. 10. The variables which affected the score in organizational management factors were age, sex, education period, work experience, the kind of work, recognition on Universal Precautions, the experience of needle stick injury, revealing dangerous circumstance related to infection, and training on precaution again infection. According to the result above, compliance level of Universal Precautions showed high correlation with sex, the recognition on Universal Precautions, the experience of needle stick injury, training on precaution against infection, the belief in the effect of Universal Precautions, the recognition degree of conflicts and organizatinal management factors. These results could be used as the basic materials for the developing infection protection programs. Also, There should have a systematic training course to elevate a effective compliance level of Universal Precautions as well as the manageeent of infection protection programs.

• Journal of Hospice and Palliative Care
• /
• v.11 no.3
• /
• pp.136-139
• /
• 2008

Purpose: Epidural morphine infusion has been used to control pain in cancer patients whose cancer pain can not be controlled high dose intravenous morphine injection. To study the effectiveness and side effects of epidural morphine for the treatment of cancer pain in terminal patients at Hospice Ward, we evaluated the change in morphine equivalent daily dose for effectiveness and complications of epidural morphine infusion. Methods: We retrospectively analyzed 24 terminal cancer patients who were treated with continuous epidural morphine between 2001 and 2004 at Hospice Ward of St. Vincent's Hospital. Results: The median of baseline morphine equivalent daily dose was 615 mg, whereas the median dose of initial epidural morphine was 16 mg. The median of morphine daily equivalent daily dose dropped from 615 mg to 274 mg in one week after epidural morphine infusion therapy (P-value=0.000). The median survival from the time of the first catheter insertion was 35 days. In 6 patients, the catheter was removed due to complications, however the catheter was reinserted in 3 patients. Conclusion: Cancer pain management by epidural morphine infusion is very effective method with low rate of severe complication.

• Korean Journal of Veterinary Research
• /
• v.33 no.1
• /
• pp.151-169
• /
• 1993

The present study was carried out to investigate the best condition for nuclear-cytoplasm fusion and in vitro culture of nuclear transplanted embryos and to investigate the production of nuclear transplanted offsprings. The nuclei from 2-, 4- and 8-cell mouse embryos were transferred into enucleated 2-cell embryos, and the reconstituted embryos were submitted to direct current(DC) pulses at output voltage of 1.0, 1.5 and 2.0 kV/cm for 100, 150 and $200{\mu}$ sec to induce cell fusion. 1. The culture of intact or zona cut 2-cell embryos in the medium supplemented with cytochalasin B($5{\mu}g/m{\ell}$) and colcemide($0.1{\mu}g/m{\ell}$)for 30 and 60 minutes did not affect the development to later stage. 2. The in vitro developmental rates of group A(a nucleus from one of the blastomeres was removed) and B(electrofusion of group A) were significantly lower than that of control group(p<0.01). 3. When nuclear transplanted embryos were submitted to electrofusion, the significantly higher fusion rates of 2-cell donor nuclei were achieved at the electric field strength of DC 1.5kV/cm for 100 and $150{\mu}$ sec, DC 2.0 kV/cm for $100{\sim}200{\mu}$ sec than DC 1.0 kV/cm for 100 and $150{\mu}$ sec(p<0.01). The significantly higher fusion rates of 4-cell donor nuclei were achieved at DC 2.0 kV/cm for 100 and $150{\mu}$ sec than DC 1.0kV/cm for $100{\sim}200{\mu}$ sec(p<0.01). These fusion rates in 8-cell donor nuclei were 88.7~99.3%. 4. The developmental potency to blastocyst in 2- and 4-cell donor nuclei was significantly higher in DC 1.0 and 2.0 kV/cm for $100{\sim}200{\mu}$ sec treated group and DC 2.0 kV/cm for 150 and $200{\mu}$ sec treated group (p<0.01). The developmental potency to blastocyst in 8-cell donor nuclei was significantly higher in DC 2.0 kV/cm for $100{\mu}$ sec treated group than in DC 1.0 kV/cm for $100{\mu}$ sec treated group and DC 2.0 kV/cm for 150 and $200{\mu}$ sec treated group(p<001). 5. The developmental potency to blastocyst after nuclear transplantation was significantly higher in 2-cell donor nuclei than in 8-cell donor nuclei(p<0.01). 6. The success rate of nuclear injection into enucleated 2-cell embryos was significantly higher in 2-cell donor nuclei than in 4- or 8-cell donor nuclei(p<0.01). 7. The culture time taken for the nuclear transplanted 2-cell embryos to blastocyst stage was significantly longer in 2-cell donor nuclei than in 8-cell donor nuclei(p<0.01). 8. There was no significant difference in the developmental potency of nuclear transplanted embryos within the concentration of EGF at 0 to 15 ng per $m{\ell}$ of BMOC-3 solution. 9. The production rates of offspring after transfer of nuclear transplanted embryos to recipient mouse were significantly higher in 2-cell donor nuclei than in 8-cell donor nuclei(p<0.01).

• Journal of Embryo Transfer
• /
• v.19 no.1
• /
• pp.43-51
• /
• 2004

The present study was conducted to investigate the effects of fusion and/or activation protocol on in vitro development of porcine somatic cell nuclear transfer (SCNT) embryos. Porcine fetal fibroblast cells were transferred into the perivitelline space of enucleated in vitro matured oocytes. Cell fusion and activation were induced simultaneous fusion/activation (SA) or delayed activation (DA) with or without cytochalasin B (CB) treatment with electic pulses in 0.28 M mannitol-based medium. The SCNT embryos were cultured in vitro for 7 days and stained with Hoechst 33342 to determine the number of nuclei. After 7 days culture, cleavage and blastocyst formation rates were 72.4% and 7.6% in SCNT and 76.3% and 20.4% in parthenotes. To examine the effect of electric field strengths on development of SCNT embryos, oocytes were fused two pulses of 110 V/mm, 130 V/mm or 150 V/mm for 30 sec post-injection. The fusion and cleavage rates in 130 V/mm group (70.2% and 72.6%) and 150 V/mm group (72.6% and 70.5%) were higher (P<0.05) than 110 V/mm group (47.1% and 48.6%), respectively. However, the rate of embryos developing to the blastocyst stage (8.1%, 9.7% and 10.7%) were not different among three groups. The cleavage rates and the blastcyst formation rates were not different among three treatment groups (SA group, 71.4% and 9.7%; SA+CB treatment group, 74.7% and 8.0%; DA+CB treatment group, 70.8% and 11.2%, respectively). And, no different in the number of cells in blastocysts was observed among the three groups (22.5$\pm$12.8, 23.3$\pm$11.2 and 21.6$\pm$10.4, respectively). These result suggest that two pulses of 130 V/mm or 150 V/mm for 30 sec with SA treatment or DA treatment are enough for fusion/activation of porcine somatic cell nuclear transfer (SCNT) embryos to develop to the blastocyst stage.

• Clinical and Experimental Reproductive Medicine
• /
• v.37 no.2
• /
• pp.135-142
• /
• 2010

Objective: To evaluate the effectiveness of soft stimulation protocol using GnRH antagonist/clomiphene citrate (CC)/recombinant FSH (rFSH) in patients undergoing controlled ovarian stimulation (COS) with intrauterine insemination (IUI), compared with GnRH antagonist multiple dose protocol (MDP) using GnRH antagonist/rFSH. Methods: Eighty infertile women were randomized to soft stimulation protocol group (n=40) or GnRH antagonist MDP group (n=40). In both groups, IUI was performed 36~40 hours after hCG injection. Statistical analysis was performed using Student's t-test, $\chi^2$ test or Fisher's exact test as appropriate. Results: Total dose and days of rFSH required for COS were significantly fewer in soft stimulation protocol group (p<0.001, p<0.001). A premature LH surge did not occur in any patients of both groups. Clinical pregnancy rate per cycle was similar between the two groups. Conclusion: Soft stimulation protocol provides comparable pregnancy rates to GnRH antagonist MDP despite fewer total dose and days of rFSH, and so can become one of the patient-friendly, cost-effective alternatives for infertile patients undergoing COS with IUI.

• Clinical and Experimental Pediatrics
• /
• v.49 no.1
• /
• pp.46-50
• /
• 2006

Purpose : Intradermal BCG vaccine has not well been accepted by pediatric practitioners due to BCG lymphadenitis. Therefore, this study was undertaken to find out the incidence of lymphadenitis following intradermal BCG vaccination and its clinical outcome. Methods : One thousand and fifty infants, who received intradermal BCG(French 1173 P2, Korea Tuberculosis Association) vaccination in the Well Baby Clinic of Hanyang University Hospital from July 2001 to January 2004, were included in the study. Severe local reactions at the injection site and any mass noted on surrounding areas were reported to, and evaluated by, pediatricians. Surgical procedures, either surgical resection or needle aspiration, were recommended when lymph nodes progressed to suppurate without regression. Results : Twenty infants(1.9 percent) developed lymphadenitis 2 to 8 months following vaccination. The incidence of BCG lymphadenitis was significantly higher in infants born with intrauterine period of <38 weeks and birth weight of <2,700 g. The lymph nodes became suppurative in 7/17 infants (41.2 percent) and four infants required surgical procedures with which the rate for the requirement of surgical procedures among intradermal BCG vaccinnes approximated to be 0.45 percent. There was no correlation between the size of lymph nodes and suppuration, however surgical procedures were required significantly more often for lymph nodes of greater than 3 cm in diameter. Conclusion : The incidence of BCG lymphadenitis following intradermal BCG(French 1173 P2, Korea Tuberculosis Association) vaccinations would be more than 1.9 percent, when considering cases of lymphadenits not reported. More efforts need to be paid to decrease the incidence of BCG lymphadenitis in order to promote intradermal BCG vaccination in Korea.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.6
• /
• pp.590-598
• /
• 2005

An adequate method to identify chromium separation, Cr(III) and Cr(VI), in water samples were studied by using High Performance Liquid Chromatography(HPLC) coupled with Inductively Coupled Plasma Mass Spectometer(ICP-MS) equipped with Dynamic Reaction Cell(DRC). The characteristic distribution of Cr(III) and Cr(VI) in the raw water taken at the six water intake stations in Seoul, was analyzed by the method developed by the authors. The chromium species separated by HPLC was isocratically conducted by using tetrabutylammonium phosphate monobasic(1.0 mM TBAP), ethylenediaminetetraacetic acid(0.6 mM EDTA) and 2% v/v methanol as the mobile phase. 5% v/v methanol was used as flushing solvent. A reactive ammonia($NH_3$) gas was used to eliminate the potential interference of $ArC^+$. Several Parameters such as solvent ratio, pH, flow rate and sample injection volume were optimized for the successful separation and reproducibility. Although it has been reported thai the separation sensitivity of Cr(III) is superior to that of Cr(VI), the authors observed Cr(VI) was more sensitive than Cr(III) when ammonia($NH_3$) gas was used as the reaction gas. It took less than 3 minutes to analyze chromium species with this method and the estimated detection limits were $0.061\;{\mu}g/L$ for Cr(III) and $0.052\;{\mu}g/L$, for Cr(VI). According to the results from the analysis on chromium species in the raw water of the six intake stations, the concentrations of Cr(III) ranged from 0.048 to $0.064\;{\mu}g/L$(ave. $0.054\;{\mu}g/L$) while that of Cr(VI) ranged from 0.014 to $0.023\;{\mu}g/L$(ave. $0.019\;{\mu}g/L$). Recovery ratio was very high($90.1{\sim}94.1%$). There were two or three times more Cr(III) than Cr(VI) in the raw water.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.271-282
• /
• 2020

Sewage treatment plants are social infrastructure of cities. The sewage distribution rate in Korea is reaching 94% based on the sewage statistics based in the year of 2017. In Korean sewage treatment plants, use of PAC (Poly Aluminum Chloride) accounts for 58%. It contains a large amount of impurities (heavy metal) according to the quality standards, however, there have been insufficient efforts to reinforce the standards or technically improve the quality, which resulted in secondary pollution problems from injecting excessive coagulant. Also, the increase in the use of chemicals is leading to the increases in the annual amount of sewage sludge generated in 2017 and the need to reuse sludge. As such, this study aims to verify the possibility of reusing sludge by evaluating the stability of heavy metals based on the injection of coagulant mixture during water treatment which uses the torrefield wood powder and natural materials, and evaluating the sedimentation and heating value of sewage sludge. As a result of analyzing heavy metals (Cr, Fe, Zn, Cu, Cd, As, Pb, and Ni) from the coagulant mixture and PAC (10%), Cr, Cd, Pb, Ni, and Hg were not detected. As for Zn, while its concentration notified in the quality standards for drinking water is 3 mg/L, only a small amount of 0.007 mg/L was detected in the coagulant mixture. Maximum amounts of over double amounts of Fe, Cu, and As were found with PAC (10%) compared to the coagulant mixture. Also, an analysis of sludge sedimentation found that the coagulant mixture showed a better performance of up to double the speed of the conventional coagulant, PAC (10%). The dry-basis lower heating value of sewage sludge produced by injecting the coagulant mixture was 3,378 kcal/kg, while that of sewage sludge generated due to PAC (10%) was 3,171 kcal/kg; although both coagulants met the requirements to be used as auxiliary fuel at thermal power plants, the coagulant mixture developed in this study could secure heating values 200 kal/kg higher than the counterpart. Therefore, utilization of the coagulant mixture for water treatment rather than PAC (10%) is expected to be more environmentally stable and effective, as it helps generating sludge with better stability against heavy metals, having a faster sludge sedimentation, and higher heating value.