• The Journal of Korean Physical Therapy
• /
• v.15 no.3
• /
• pp.189-201
• /
• 2003

The purpose of this study was to know the effect of aquatic-exercise on muscle atrophy which induced by steroid injection. The forty-eight Sparague-Dawley adult male rats were assigned to the 4 groups; Group I (distilled water injection), Group II (steroid injection), Group III (distilled water injection with aquatic exercise), Group IV (steroid injection with aquatic exercise). We observed their body weight, muscle relative weight, myofibrillar protein content. The results of this study were as follows; 1. Body weight was decreased rapidly on steroid injection groups in comparison with distilled water injection groups after 2 weeks (p<0.01), but that was almost recovered as before test on steroid injection group with aquatic exercise. 2. The relative weight of gastrocnemius muscles was decreased on steroid injection groups in comparison with distilled water injection groups. however, Decrease of it on steroid injection group with aquatic exercise for steroid injection group was fallen. There was very significant difference after 4 weeks (p<0.01). 3. Myofibrillar protein content of gastrocnemius muscles was decreased on steroid injection groups in comparison with distilled water injection groups. however, Decrease of it on steroid injection group with aquatic exercise for steroid injection group was fallen. There was significant difference after 4 weeks (p<0.05).

• Journal of ILASS-Korea
• /
• v.27 no.4
• /
• pp.181-187
• /
• 2022

For carbon neutrality, direct-injection hydrogen engines are attracting attention as a future power source. It is essential to estimate the transient injection rate of hydrogen for the optimization of hydrogen injection in direct injection engines. However, conventional injection rate measurement techniques for liquid fuels based on the injection-induced fuel pressure change in a test section are difficult to be applied to gaseous fuels due to the compressibility of the gas and the sealing issue of the components. In this study, a momentum flux measurement technique is introduced to obtain the transient injection rate of gaseous fuels using a force sensor. The injection rate calculation models associated with the momentum flux measurement technique are presented first. Then, the volumetric injection rates are estimated based on the momentum flux data and the calculation models and compared with those measured by a volumetric flow rate meter. The results showed that the momentum flux measurement can detect the injection start and end timings and the transient and steady regimes of the fuel injection. However, the estimated volumetric injection rates showed a large difference from the measured injection rates. An alternative method is suggested that corrects the estimated injection rate results based on the measured mean volumetric flow rates.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.6
• /
• pp.53-67
• /
• 2001

In this study the pilot test of CGS as injection method by low slump mortar was performed and the results were analyzed in order to find out the application of this method and effect of settlement restraint. The site far pilot test is adjacent to apartments supported by pile foundations. Sand drain method was performed previously as countermeasures against settlement, but settlement occur continuously because this ground is very soft. Site investigations such as SPT, DCPT and vane shear test were performed to determine the characteristics of ground improvement. Field measurements and FDM analysis were performed on purpose to find out the displacement of ground during injection works. From the results of this study, CGS method can be optimized by the control of diagram, space, depth, injection material, and injection pressure. CGS improved soft ground compositely by the bearing effect of CGS columns and reinforcement of adjacent ground. Considering that increase of N value is about 2.1, CGS can be considered as an effective method to increase the bearing capacity as well as to stop the settlement of soft ground. It is also expected to be economic and effective in improvement of ground when it is used in applicable sites.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.3
• /
• pp.79-88
• /
• 2019

This study described a results of groundwater injection test in cavity, in order to evaluate characteristics of cavity expansion under pavement. That is, groundwater amount proportional to the cavity volume was injected into the generated cavity step by step, and then the cavity with the changed size was monitored as the injected groundwater was drained. The test result showed that the cavity volume by groundwater injection increased, and then it converged or decreased. This means that some of the relaxation soil around the cavity collapsed, and the fine-grained soils in some soils filled the void in the surrounding soils when the cavity is expanded by groundwater injection. The volume change and expansion characteristics of the cavity according to the groundwater injection step were analyzed. The result showed that the cavity extended laterally. Therefore, it was found that the cavity expansion is caused by the repetition of the relaxation soil collapse due to the groundwater flow and the loss of the collapsed soil below the cavity.

• Journal of Acupuncture Research
• /
• v.27 no.1
• /
• pp.65-74
• /
• 2010

Objectives : This study was to investigate the effects of Cervi Pantotrichum Cornu Pharmacopuncture and Bovis calculus Fel Ursi Pharmacopuncture on autonomic nervous system with Heart Rate Variability(HRV). Purpose of the trial was to observe what influence Cervi Pantotrichum Cornu Pharmacopuncture and Bovis calculus Fel Ursi pharmacopuncture have on the autonomic nervous system. Methods : 40 healthy male volunteers were divided into two experimental groups, such as Cervi Pantotrichum Cornu Pharmacopuncture group and Bovis calculus Fel Ursi Pharmacopuncture group. Study design was a randomized, double-blind clinical trial. 20 subjects in one experimental group were injected Cervi Pantotrichum Cornu Pharmacopuncture, 20 subjects in other experimental group were injected hydrolyzed Bovis calculus Fel Ursi Pharmacopuncture at GB21(Kyonjong). We measured HRV 7 times : baseline measurement and every 5 minutes for 30 minutes after injection. The SPSS 15.0 for Windows was used to analyze the data by the paired t-test(in group) and independent sample t-test(between the groups). Results A. Time Domain Analysis 1. Analysis of Mean HRV, SDNN and Complexity After injection of Cervi Pantotrichum Cornu Pharmacopuncture, Mean HRV was significantly decreased all the times after injection. SDNN was significantly increased at immediate and 25 minute after injection. Complexity was significantly decreased only at 15 minute after injection. After injection of Bovis calculus Fel Ursi Pharmacopuncture, Mean HRV was significantly decreased all the times after injection. Complexity was significantly decreased at 15 minutes after injection. 2. Analysis of HRV index, pNN50 After injection of Cervi Pantotrichum Cornu Pharmacopuncture, HRV index was significantly increased immediately after injection. pNN50 was significantly decreased at immediately, 20 and 25 minutes after injection. After injection of Bovis calculus Fel Ursi Pharmacopuncture, HRV index was significantly increased immediately after injection. pNN50 was significantly decreased at immediate and 25 minutes after injection. B. Frequency Domain Analysis 1. Analysis of Ln(TP), Ln(HF), Ln(LF), Ln(VLF) After injection of Cervi Pantotrichum Cornu Pharmacopuncture, Ln(TP) was significantly increased at immediate and 25 after injection. Ln(HF) was significantly increased all the times after injection. Ln(LF) was significantly increased at 15, 20 and 25 minutes after injection. Ln(VLF) was significantly increased at immediate and 25 minutes after injection. After injection of Bovis calculus Fel Ursi Pharmacopuncture, Ln(TP) was significantly increased at immediately and 25 after injection. Ln(LF) was significantly increased at 20 and 25 minutes after injection. Ln(VLF) was significantly increased at immediate and 25 minutes after injection. Conclusions : We results suggest that Cervi Pantotrichum Cornu Pharmacopuncture and Bovis calculus Fel Ursi Pharmacopuncture in healthy adult men tend to activate the autonomic nervous system and sympathetic nervous system within normal range.

• Clinics in Shoulder and Elbow
• /
• v.23 no.2
• /
• pp.80-85
• /
• 2020

Background: Atelocollagen has been studied for restoration of rotator cuff tendon. In this study, we attempted to evaluate the clinical outcome of ultrasound-guided atelocollagen injection in an outpatient clinic for patients with partial rotator cuff tear. Methods: We recruited 42 outpatients who visited our hospital from May 2019 to September 2019. Atelocollagen injection was performed in patients with partial rotator cuff tear diagnosed by magnetic resonance imaging and ultrasound. American Shoulder and Elbow Surgeons (ASES), Constant, Korean Shoulder Score (KSS) and Simple Shoulder Test (SST) scores, and range of motion were assessed before injection and after 2 months. Statistically, we analyzed the clinical results using the Wilcoxon signed-rank test. Results: Finally, 15 patients were enrolled for analysis. There was no significant difference between pre- and post-injection in terms of range of motion, ASES (57.0 vs. 60.4), Constant (56.4 vs. 58.9), KSS (64.6 vs. 68.5), and pain-visual analog scale (4.2 vs. 3.7), except function-visual analog scale (F-VAS; 6.3 vs. 7.1) and SST (6.6 vs. 6.9). A significant difference was found in SST (P=0.046) and F-VAS (P=0.009). According to the ultrasound results at 2 months, we found hyperechoic materials in three of seven patients. The most common complication of atelocollagen injection was post-injection pain (53%, 8/15). Conclusions: Ultrasound-guided atelocollagen injection for partial rotator cuff tear showed no significant change in terms of clinical outcomes, except for F-vas and SST score. Tendon regeneration was not clear due to the remnants of atelocollagen present at 2-month follow-up ultrasound. There seems to be alarming post-injection pain for 2 to 3 days in the patients who received atelocollagen injection in an outpatient clinic.

• Journal of ILASS-Korea
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2009

This paper present the diesel fuel spray evolution and atomization performance in a multi-hole nozzle in terms of injection rate, spray evolutions, and mean diameter and velocity of droplets in a compression ignition engine. In order to study the effect of split injection on the diesel fuel spray and atomization characteristic in a multi-hole nozzle, the test nozzle that has two-row small orifice with 0.2 mm interval was used. The time based fuel injection rate characteristics was analyzed from the pressure variation generated in a measuring tube. The spray characteristics of a multi-hole nozzle were visualized and measured by spray visualization system and phase Doppler particle analyzer (PDPA) system. It was revealed that the total injected fuel quantities of split injection are smaller than those of single injection condition. In case of injection rate characteristics, the split injection is a little lower than single injection and the peak value of second injection rate is lower than single injection. The spray velocity of split injection is also lower because of short energizing duration and small injection mass. It can not observe the improvement of droplet atomization due to the split injection, however, it enhances the droplet distributions at the early stage of fuel injection.

• Journal of Periodontal and Implant Science
• /
• v.42 no.2
• /
• pp.45-49
• /
• 2012

Purpose: The aim of the present clinical trial was to compare pain during injection of anterior middle superior alveolar (AMSA) technique with that of infiltration injection technique in the maxilla in periodontal flap surgeries of patients referring to the Department of Periodontics, Faculty of Dentistry, Tabriz University of Medical Sciences. Methods: Twenty subjects with an age range of 20 to 40 years were selected for the present study. One side of the maxilla was randomly selected as the test side and the other as the control side using a flip of a coin. AMSA technique was used on the test side and infiltration technique was used on the control side for anesthesia. On both sides 2% lidocaine containing 1:80,000 epinephrine was used for anesthesia. The operator obtained the visual analogue scale for each patient immediately after the injection and immediately after surgery. Data was analyzed using descriptive statistical methods (frequency percentages, means and standard deviations) and Wilcoxon's test using SPSS ver. 13 (SPSS Inc.). Statistical significance was defined at P<0.05. Results: There were no statistically significant differences in pain during injection between the two techniques (P=0.856). There were statistically significant differences in postoperative pain between the two injection techniques (P=0.024). Conclusions: Postoperative pain in AMSA injection technique was less than that in the infiltration technique. Therefore, the AMSA technique is preferable in the periodontal surgeries for the anesthesia of palatal tissues given the fact that it has other advantages, too.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.75-85
• /
• 2017

PURPOSES : The purpose of this study was to determine the optimum mix design of the content of 100 % reclaimed asphalt pavement (RAP) for spray injection application with different binder types. METHODS : Literature review revealed that spray injection method is the one of the efficient and economical methods for repairing a small defective area on an asphalt pavement. The Rapid-Setting Polymer modified asphalt mixtures using two types of rapid setting polymers-asphalt emulsion and a quick setting polymer asphalt emulsion-were subjected to the following tests to determine optimum mix designs and for performance comparison: 1) Marshall stability test, 2) Retained stability test, 3) Wet track abrasion test, and 4) Dynamic stability test. RESULTS and CONCLUSIONS : Type A, B, and C emulsions were tested with different mix designs using RAP aggregates, to compare the performances and determine the optimum mix design. Performance of mixtures with Type A emulsion exceeded that of mixtures with Type B and C emulsion in all aspects. In particular, Type A binder demonstrated the highest performance for WTAT at low temperature. It demonstrated the practicality of using Type A mixture during the cold season. Furthers studies are to be performed to verify the optimum mix design for machine application. Differences in optimum mix designs for machine application and lab application will be corrected through field tests.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.4
• /
• pp.787-796
• /
• 2019

In this paper, we propose the design and test measure of Ringer injection IoT system for controling the ringer injection status and notifying the server system of the collected status informations such as the completion of injection, the remaining liquid, the injection status, and the emergency alarming of the urgent patients. We design the circuit diagrams composed of linger injection sensors, switches, status indicators, wireless communication functionalities, and propose the controlling and monitoring algorithms for sensing the linger injection status and notifying the collected status informations to a server system. Furthermore, we derive the testing criteria, such as linger liquid sensing time, sensing distance, operating temperature, input power, power consumption, and wireless communication speed, and analyze the test results.