• 제목/요약/키워드: Injection pressure

검색결과 2,429건 처리시간 0.026초

호소수 탁도변화 대응을 위한 고플럭스 막여과공정의 Pilot 연구 (A pilot study of high flux membrane process for responding to influent turbidity changes in reservoir water)

  • 강준석;성자영;유제완;김형수;이재규;전민혁;천지훈
    • 상하수도학회지
    • /
    • 제34권6호
    • /
    • pp.393-402
    • /
    • 2020
  • In the membrane process, it is important to improve water treatment efficiency to ensure water quality and minimize membrane fouling. In this study, a pilot study of membrane process using reservoir water was conducted for a long time to secure high flux operation technology capable of responding to influent turbidity changes. The raw water and DAF(Dissolved Air Flotation) treated water were used for influent water of membrane to analyze the effect of water quality on the TMP (Trans Membrane Pressure) and to optimize the membrane operation. When the membrane flux were operated at 70 LMH and 80 LMH under stable water quality conditions with an inlet turbidity of 10 NTU or less, the TMP increase rates were 0.28 and 0.24 kPa/d, respectively, with minor difference. When the membrane with high flux of 80 LMH was operated for a long time under inlet turbidity of 10 NTU or more, the TMP increase rate showed the maximum of 43.5 kPa/d. However, when the CEB(Chemically Enhanced Backwash) cycle was changed from 7 to 1 day, it was confirmed that the TMP increase rate was stable to 0.23 kPa/d. As a result of applying pre-treatment process(DAF) on unstability water quality conditions, it was confirmed that the TMP rise rates differed by 0.17 and 0.64 kPa/d according to the optimization of the coagulant injection. When combined with coagulation pretreatment, it was thought that the balance with the membrane process was more important than the emphasis on efficiency of the pretreatment process. It was considered that stable TMP can be maintained by optimizing the cleaning conditions when the stable or unstable water quality even in the high flux operation on membrane process.

전산유체역학을 이용한 단일 송풍기가 적용된 공냉식 연소설비의 효율개선 (Enhancement of combustion efficiency of a air-cooled combustor system with single F.D. Fan Using CFD)

  • 김민철;손병현;이재정;박흥석
    • 한국산학기술학회논문지
    • /
    • 제22권6호
    • /
    • pp.460-468
    • /
    • 2021
  • 본 연구는 multi fan 방식의 "공랭식 연소설비"의 공정관리상의 문제점을 single F.D. fan 으로 대체하여 개선시키기 위해 CFD 진행하였고, 연소로 내 유동조건 변화를 분석하여 문제점을 확인하였다. 이를 개선하기 위해 연소공기 주입구조를 변경하였고, 구조 변화에 따른 연소효율 개선을 수치해석으로 평가하였다. 또한 실제 연소설비에 수치해석결과를 반영하여 구조개선을 한 후 개선 전·후의 연소효율을 실험적으로 측정하였다. 먼저 기존 Single F.D fan 이 적용된 연소설비에 대한 수치해석을 통해, 2개의 유로로 공급되는 연소공기가 각 유로의 마찰력 차이와 압력의 변화로 인해 연소로 내에서 공급비율이 불규칙하게 되어 선회방식의 연소조건을 위한 축 형태의 난류형성이 어려움을 확인하였다. 이를 개선하기 위해서 연소로에 주입하는 공기 공급 방식을 두 가지로 나누어 수치해석을 하였다. 첫 번째 방식은 연소공기를 외벽에서 180 ~ 360° 회전 후 예열된 연소공기가 주입되는 구조에 대하여 검토하였고, 두 번째는 연소로 내에는 선회할 수 있는 베인(vane) 구조를 적용하여 연소로 밖에서 1차 열교환 후 연소로 내부에 접선방향으로 연소공기가 주입되는 구조에 대하여 검토하였다. 그 결과, single F.D. fan을 가진 공랭식 연소로에 선회방식으로 공기를 주입할 경우, 연소로 외벽의 냉각과 연소로 내부의 완전혼합 유지를 위해 이중 냉각벽을 가지는 덕트 구조를 적용하는 것이 연소조건을 최적화하는데 바람직한 것으로 나타났으며, 실제 운영중인 설비에 적용하여 개선 전·후의 연소효율을 비교한 결과 연소효율이 개선되는 것을 확인할 수 있었다.

입자기반 개별요소모델을 이용한 암석 균열의 수리역학 거동해석: 국제공동연구 DECOVALEX-2023 Task G (Benchmark Simulation) (Hydro-Mechanical Modeling of Fracture Opening and Slip using Grain-Based Distinct Element Model: DECOVALEX-2023 Task G (Benchmark Simulation))

  • 박정욱;박찬희;이창수
    • 터널과지하공간
    • /
    • 제31권4호
    • /
    • pp.270-288
    • /
    • 2021
  • 본 연구에서는 입자기반 개별요소모델(grain-based distinct element model, GBDEM)을 이용하여 암석 균열의 역학적, 수리적 거동을 평가할 수 있는 수치해석기법을 제시하고 해석해와의 비교를 통해 검증하였다. 이는 DECOVALEX-2023 프로젝트 Task G의 일환으로 수행된 벤치마크 모델링 연구로, Task G는 결정질 암반 내 균열의 열-수리-역학적 복합거동을 해석하기 위한 수치해석기법을 개발하는 데에 목표가 있다. 본 연구에서는 사면체 개별 입자들을 이용하여 해석모델을 생성하고 3DEC을 이용하여 입자와 접촉에서의 거동을 해석하였다. 이 과정에서 등가연속체 개념을 적용해 입자기반모델의 미시물성을 산정할 수 있는 새로운 기법을 제시하였다. 한편, 균열 경사각과 거칠기, 경계응력조건 및 압력 조건에 따른 해석을 실시하여 각 해석조건이 균열의 수직, 전단방향 거동에 미치는 영향을 살펴보았다. 해석 결과, 제안된 수치모델은 경계응력에 따른 균열의 미끄러짐(fracture slip)과 유체 압력에 따른 균열의 개방(fracture opening), 균열 경사에 따른 응력 분포, 거칠기로 인한 전단변위의 구속 등을 합리적으로 재현하고 있음을 확인하였다. 수치해석을 통해 계산된 균열의 수직방향, 전단방향 변위는 모두 해석해를 통해 계산된 값과 거의 일치하는 결과를 보였다. 본 연구의 해석모델은 Task G에 참여하는 국외 연구팀들과의 의견 교류와 워크숍을 통해 지속적으로 개선하는 한편, 향후 다양한 조건의 실내시험에 적용하여 타당성을 검증할 예정이다.

이중 콘형 부분예혼합 GT 연료노즐의 연소특성 및 발전플랜트 실증 (Combustion Characteristics and On-site Performance Test of a Double-cone Partial Premixed Nozzle with Various Fuel hole Patterns)

  • 김한석;조주형;김민국;황정재;이원준;민경욱;강도원
    • 한국가스학회지
    • /
    • 제25권6호
    • /
    • pp.22-28
    • /
    • 2021
  • 발전용 가스터빈에 사용되는 이중 콘형 예혼합 연소기의 성능 개선 및 검증을 위하여 기존 노즐에서 연료 분사 특성을 개선한 노즐(분사구 직경 증가, 분사구 수 감소, 총 분사면적 유지)을 이용하여 고압 및 다중화염 조건에서 실험 연구를 수행하였으며 배기가스 특성을 기존 노즐과 비교하였다. 실험 결과로는 노즐의 연료 직경을 크게 한 경우 연소용 공기로 연료의 침투 거리가 증가하기 때문에 콘 내부에서 연료와 공기의 혼합특성이 개선되어 상압뿐만 아니라 압력 상승 시 NOx 배출 농도는 감소하며 다중 화염의 경우 화염간 연소영역의 중첩이 감소하게 되어 NOx 배출은 감소하지만 화염 안정성은 저하된다. 연료 분사구를 개선한 노즐의 발전 플랜트 실증 결과는 실험 결과와 같이 기존 노즐에 비하여 NOx 농도가 낮게 배출되었다.

수소 제트화염이 터널 구조체에 미치는 영향 분석 (Analysis of effect of hydrogen jet fire on tunnel structure)

  • 박진욱;유용호;김휘성
    • 한국터널지하공간학회 논문집
    • /
    • 제23권6호
    • /
    • pp.535-547
    • /
    • 2021
  • 국내에서는 수소경제 활성화 정책을 수립하고 수소사회 실현을 위해 수소 인프라 및 수소차 보급 확대를 계획 하고 있다. 이에 따라 수소차의 보급이 급속도로 이루어질 것으로 예상되며, 동시에 수소차의 사고에 대응하기 위한 대책의 확립이 요구되고 있다. 본 연구에서는 수소차에 의해서 발생되는 수소 제트화염이 터널 내부 벽체에 미치는 영향과 내부 복사열 특성 분석을 위해 실험적 연구를 수행하였다. 실험은 수소차에서 발생되는 조건과 동일하게 하기 위해 분사압력을 700 bar로 설정하고, 분사노즐 직경은 1.8 mm로 설정하였다. 또한, 일반 터널에 적용되고 있는 콘크리트 압축강도 40 MPa의 터널 내화 시험체를 제작하고 제트화염 분사노즐과 시험체간의 이격거리에 따른 영향을 검토하였다. 분사노즐과 터널 내화시험체의 이격거리를 변수로 하여 2 m와 4 m에 대해 결과를 분석하였다. 그 결과로부터 시험체 내부 최대 온도는 1,349.9℃ (이격거리 2 m)가 측정되었고, 제트화염 주위 복사열은 최대 39.16 kW/m2까지 나타났다.

Safety and efficacy of target controlled infusion administration of propofol and remifentanil for moderate sedation in non-hospital dental practice

  • Douglas Lobb;Masoud MiriMoghaddam;Don Macalister;David Chrisp;Graham Shaw;Hollis Lai
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제23권1호
    • /
    • pp.19-28
    • /
    • 2023
  • Background: Fearful and anxious patients who find dental treatment intolerable without sedative and analgesic support may benefit from moderate sedation. Target controlled infusion (TCI) pumps are superior to bolus injection in maintaining low plasma and effect-site concentration variability, resulting in stable, steady-state drug concentrations. We evaluated the safety and efficacy of moderate sedation with remifentanil and propofol using TCI pumps in non-hospital dental settings. Methods: A prospective chart review was conducted on 101 patients sedated with propofol and remifentanil using TCI pumps. The charts were completed at two oral surgeons and one general dentist's office over 6 months. Hypoxia, hypotension, bradycardia, and over-sedation were considered adverse events and were collected using Tracking and Reporting Outcomes of Procedural Sedation (TROOPS). Furthermore, patient recovery time, sedation length, drug dose, and patient satisfaction questionnaires were used to measure sedation effectiveness. Results: Of the 101 reviewed sedation charts, 54 were of men, and 47 were of women. The mean age of the patients was 40.5 ±18.7 years, and their mean BMI was 25.6 ± 4.4. The patients did not experience hypoxia, bradycardia, and hypotension during the 4694 min of sedation. The average minimum Mean Arterial Pressure (MAP) and heartbeats were 75.1 mmHg and 60.4 bpm, respectively. 98% of patients agreed that the sedation technique met their needs in reducing their anxiety, and 99% agreed that they were satisfied with the sedation 24 hours later. The average sedation time was 46.9 ± 55.6 min, and the average recovery time was 12.4 ± 4.4 min. Remifentanil and propofol had mean initial effect-site concentration doses of 0.96 µ/.ml and 1.0 ng/ml respectively. The overall total amount of drug administered was significantly higher in longer sedation procedures compared to shorter ones, while the infusion rate decreased as the procedural stimulus decreased. Conclusion: According to the results of this study, no patients experienced adverse events during sedation, and all patients were kept at a moderate sedation level for a wide range of sedation times and differing procedures. The results showed that TCI pumps are safe and effective for administering propofol and remifentanil for moderate sedation in dentistry.

Streptozotocin 유도 당뇨병 생쥐 모델에서 지각 추출물의 항당뇨 효과 (Antidiabetic Effect of Aurantii Fructus Immaturus in Streptozotocin-induced Diabetes Model of Mice)

  • 이경재;임지성;김지은;이수경;김현주;송용선
    • 동의생리병리학회지
    • /
    • 제37권1호
    • /
    • pp.1-8
    • /
    • 2023
  • The aim of this study is to evaluate the antidiabetic effect of the water extract of Aurantii fructus immaturus (WAF), in diabetic models using enzyme, cells and mice, and to suggest a putative mechanism explaining its antidiabetic effect. In an enzyme model using the enzyme α-glucosidase, WAF had no significant effect on α-glucosidase, as compared with acarbose, an antidiabetic drug. Nonetheless, WAF was capable of reducing the blood glucose levels during oral sucrose tolerance test and oral glucose tolerance test, implying that there would be other antidiabetic pathways in no relation to inhibition of α-glucosidase. In cell models using RIN-m5f β-cells and L6 myotubes, WAF, at its non-cytotoxic doses, augmented the secretion of insulin in RIN-m5f β-cells stimulated with 5 mM glucose. In addition, it enhanced the cellular uptake of glucose in L6 myotubes stimulated with deprivation of glucose for 12 h. Therefore, it is most likely that WAF may exert its antidiabetic effects, at least in part, by enhancing insulin secretion and glucose uptake. Meanwhile, in diabetic mice induced with peritoneal injection of streptozotocin (STZ), WAF significantly improved fast blood glucose levels, glycosylated hemoglobin levels, body weight loose, blood pressure, and diabetic adverse effects on functions of the kidney and the liver. Taken together, the water extract of Aurantii fructus immaturus may ameliorate diabetes in mice injected with STZ, at least in part, by enhancing insulin secretion and glucose uptake.

수리지질 및 암반공학 지수 간 상관분석을 통한 절리암반 내 그라우트 주입성 예측 연구 동향: 리뷰논문 (Trends in Predicting Groutability Based on Correlation Analysis between Hydrogeological and Rock Engineering Indices: A Review)

  • 백광민;장성간;정성우;;양민준
    • 지질공학
    • /
    • 제33권2호
    • /
    • pp.307-322
    • /
    • 2023
  • 대형 댐 및 대심도 지하공간 개발에서 많이 시행되는 암반 그라우팅은 기초지반의 누수를 방지하여 안정성을 향상시키고 추가적인 재해를 방지하기 위해 사용되는 중요한 공종 중 하나이다. 대부분의 암반 그라우팅은 수리지질 및 암반공학적 지수들(RQD, Q-value, GSI, Js, Ap, Lu, SPI, and K)에 의해 영향을 받는다. 따라서, 안전하고 적절한 그라우팅 설계 및 시공을 위해서는 지질학자들의 정확한 기초 암반의 분석과 적절한 그라우팅 계획 수립이 필요하다. 해외의 경우 기초 암반의 수리지질 및 암반공학적 특성 분석과 그라우트 주입량(grout take, GT) 예측에 대한 연구가 활발히 이루어지고 있으며, 주로 댐의 기초지반 분야에서 많은 연구가 수행되었다. 하지만, 국내의 경우 그라우트 주입재료 및 시공관리 기법에 대한 연구는 많이 수행되었으나 암반의 수리지질 및 암반공학적 특성을 고려한 암반 그라우팅 공법에 대한 연구는 미흡한 실정이다. 이에 본 리뷰에서는 암반 그라우팅 계획시 중요한 수리지질 및 암반공학적 지수들(RQD, Q-value, GSI, Js, Ap, Lu, SPI, and K)과 그라우트 주입량의 상관성 분석을 진행한 해외 연구 사례를 파악하고 국내의 암반 그라우팅 관련 연구의 발전방향을 제시하였다.

간-부분절제(肝-部分切除) 후 나타나는 재생과정(再生過程)에서 교감신경계(交感神經系)의 역할(役割)에 관(關)한 연구(硏究) (The Role of Sympathetic Activity in the Early Phase of Liver Regeneration after Partial Hepatectomy)

  • 최상현;이중근;박청산;전보권;천연숙
    • 대한약리학회지
    • /
    • 제26권2호
    • /
    • pp.177-183
    • /
    • 1990
  • 간-부분절제후 재생과정에서 간 polyamine 대사에 교감신경계가 촉진적으로 간여하는지를 확인하기 위하여 본 실험을 시행하였다. Guanethidine 25mg/kg를 1회 (G-1), 또는 매일 1회씩 3(G-3), 5(G-5) 및 6일간(G-6) 각각 복강내-주사하고, diethyl ether 마취하에서 웅성 백서의 간을 부분$(70.4{\pm}1.99%)$-절제하여, 절제 전후의 혈압, 혈장 catecholamine치 및 간 polyamine 함량의 변동을 검토하여 다음의 성적을 얻었다. 1. 백서 꼬리에서 측정한 정상 수축기 혈압은 $98.0{\pm}3.9mmHg$이며, 이는 G-1에 별 영향을 받지 않았으나, G-3, G-5 및 G-6에 의하여는 25% 이상 현저히 저하되었다. 2. 혈장 norepinephrine 및 epinephrine치는 간-부분절제하고 3시간 후에 각각 $20.38{\pm}2.23pmole/ml$$56.06\pm4.63pmole/ml$로써 현저한 증가를 보였으며 그 증가율은 G-1 및 G-6에 의하여 80.46% 이상 현저히 억제되었다. 3. 간-부분절제 전의 putrescine, spermidine 및 spermine 함량은 각각 $118.6{\pm}14.1$, $873.8{\pm}27.7$$875.6{\pm}42.1nmole/g$ wet liver로서 절제후 6시간에 각각 5.5배, 1.5배 및 1.3배 이상 증가되었으며, putrescine의 증가만이 G-6에 의하여 유의하게 억제되었을 뿐 guanethidine-전처치에 별 영향을 받지않았다. 이상의 성적으로 미루어 볼 때, 간-부분절제후 재생과정에서 나타나는 polyamine대사의 촉진현상에 교감신경성 catecholamine들이 직접적으로 중요한 역할을 수행한다고 보기는 어렵다.

  • PDF

벤토나이트 완충재에서의 기체 팽창 흐름 수치 모델링: DECOVALEX-2019 Task A (Numerical Modelling for the Dilation Flow of Gas in a Bentonite Buffer Material: DECOVALEX-2019 Task A)

  • 이재원;이창수;김건영
    • 터널과지하공간
    • /
    • 제30권4호
    • /
    • pp.382-393
    • /
    • 2020
  • 고준위방사성폐기물을 처분하기 위한 심층처분시스템의 공학적 방벽은 처분 용기에서 방사성 핵종 누출이 발생하더라도 주변 암반으로의 누출 속도를 늦춰주는 역할을 수행해야하기 때문에 장기적으로 그 성능을 유지하여야 한다. 특히 벤토나이트 완충재와 같이 점토 물질을 다량 함유한 매질에서만 나타나는 기체 흐름 현상인 팽창 흐름은 벤토나이트 완충재의 장기 성능에 영향을 미칠 수 있기 때문에 이 현상을 명확히 규명하는 것이 매우 중요하다. 이에 따라 DECOVALEX-2019 Task A에서는 팽창 흐름에 대한 수리-역학적 메커니즘을 규명하고, 기체 이동 현상의 정량적 평가를 위한 새로운 수치 해석 기법 개발 및 검증을 수행하고자 진행되었다. 이를 위해 본 연구에서는 기존의 전통적인 다공성 매질에서의 2상 유동 및 유효응력 개념을 고려한 역학 모델을 기반으로, 손상도 개념을 적용함으로써 매질의 변형에 의한 기체의 팽창 흐름을 모사할 수 있는 수리-역학적 상호작용을 고려한 해석 모델을 개발하였다. 또한 개발된 모델을 이용하여 1차원 및 3차원 기체 주입 시험 결과와의 비교를 통해 모델 검증 및 적용성 검토를 수행하였다. 수치 해석 결과 기체 압력에 의한 팽창 흐름으로 인한 갑작스러운 공극 수압, 응력, 기체 주입량 및 유출량 증가 현상을 확인할 수 있었지만, 개발된 해석 모델에서 수리-역학적 상호작용의 영향이 과소평가 되는 한계를 확인할 수 있었다. 그럼에도 불구하고 본 연구는 팽창 흐름에 대한 예비 모델을 제공하고 후속 연구의 발전된 모델을 개발하기 위한 기반을 제공한다는 점에서 의의가 있다. 또한 본 연구에서 개발된 수리-역학적 상호작용을 고려한 수치 모델은 향후 실험실 및 현장 시험 결과 데이터 분석에 활용될 수 있을 뿐만 아니라, 실제 고준위방사성폐기물 심층처분시스템의 장기 성능평가에도 활용될 수 있을 것으로 판단된다.