• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.301-312
• /
• 1996

This study was performed to search a optimal analyzing method of cadmium in whole-blood. Cadmium was determined by graphite furnace atomic absorption spectrometry(GFAAS). We investigated the effect of ashing temperature on the absorbance of cadmium in a simple dilution(ten-fold) method with triton X-100 and matrix modifier methods treated with $NH_4H_2PO_4$(1 and 3%) and $Pd(NO_3)_2$(0.00l and 0.005%) as matrix modifier. We also compared the reported reference values of standard blood with values resulted from optimal analyzing conditions of this study. In case of a simple dilution method, when ashing temperature was set at $450^{\circ}C$, the absorbance of sample and background were $0.334{\pm}0.012$ and $1.382{\pm}0.245$, respectively. Background level was higher than the value(0.8) that can be corrected by $D_2$ background correction method. As ashing temperature was rised to $500^{\circ}C$, the absorbance of sample and background were $0.178{\pm}0.008$ and $0.711{\pm}0.223$ respectively. The higher ashing temperature($450^{\circ}C-650^{\circ}C$) was, the lower the absorbance of sample was. In case of a matrix modifier method with $NH_4H_2PO_4$(1 and 3%), when ashing temperature was rised from $500^{\circ}C$ to $650^{\circ}C$, the absorbance of sample slightly changed. The absorbances of sample at $600^{\circ}C$ were $0.230{\pm}0.017$ and $0.137{\pm}0.012$, respectively. These values were larger than that of simple dilution method. But the absorbance of background was higher than the level that can be corrected by $D_2$ method. In case of a matrix modifier method with $Pd(NO_3)_2$(0.001 and 0.005%), the absorbance of sample and background were higher than those of other methods and were stable and reproducible. When ashing temperature was over $550^{\circ}C$, the absorbance of sample was significantly decreased. In case of 0.005% $Pd(NO_3)_2$ carbon residue remained in graphite tube affected the absorbance of sample and background. From these results, We propose that in case of a simple dilution(ten-fold) method with triton X-100 ashing temperature must be maintained below $400^{\circ}C$. In order to diminish the absorbance of background, the alternative method is attenuation of injection volume or multiplication of dilution ratio. We recommend $Pd(NO_3)_2$ than $NH_4H_2PO_4$ as a matrix modifier. In case of a matrix modifier method with $Pd(NO_3)_2$ ashing temperature might be maintained below $550^{\circ}C$.

• Biomolecules & Therapeutics
• /
• v.2 no.2
• /
• pp.190-205
• /
• 1994

This study was conducted to investigate the repeated dose toxicity of DA-125, a new anthracycline antitumor antibiotic, in rats. Before the 13-week main study, a 4-week dose-range finding (DRF) study was carried out. The administration of DA-125 intravenously at dosage levels of 0, 0.125, 0.5, 2.0, and 8.0 mg/kg/day to rats for 4 weeks resulted in premature deaths of all animals in the 8.0 mg/kg/day group and in the deaths of 4 males and 4 females at 2.0 mg/kg/day. Body weights were markedly reduced in the 8.0 mg/kg/day group and showed dose-related decreases in all treatment groups when compared with the control group. Reductions in weight gain were slight and not significantly different at 0.125 mg/kg/day but animals receiving 0.5 mg/kg/day showed more marked decreases in gain in a clear dose-related manner Based On the results of the above DRF study, a 13-week repeated dose intravenous toxicity study in rats with DA-125 was performed at a dose level of 0, 0.012, 0.08 and 0.3 mg/kg/day. No treatment related effects were noted in behavior or body weight in all treatment groups. One male at the highest dose level died on study day 26, but the death could not be related to test article toxicity. Swelling and scabbing of the ears was present in all of the groups, including the control group. There were no treatment related changes in the hematological, biochemical or urinalysis values in all treatment groups. Thymus weights were significantly reduced ill males receiving 0.3 mg/kg/day and they were sligltly, and not significantly, reduced in females of the same group. While there were no associated histological changes. Treatment related necrosis was found in the tail vein (injection site) at 0.08 and 0.3 mg/kg/day. On the basis of these results, the no observed effect level (NOEL) was 0.012 mg/kg/day and the maximum tolerated dose (MTD) was estimated to be more than 0.3 mg/kg/day under the conditions tested.

• Korean Journal of Pharmacognosy
• /
• v.24 no.4
• /
• pp.267-281
• /
• 1993

To find antitumor components from higher fungi, the mycelia of Collybia confluens (Pers. ex Fr.) Kummer were cultured in artificial media. For efficient production of the mycelia, the influences of various modifications of culture conditions were examined. A water-soluble protein-bound polysaccharide fraction, Fr. A, was obtained from the mycelia by hot water extraction. When Fr. A was purified and fractionated by DEAE-cellulose and Sepbadex G-200 gel filtration chromatographies into four fractions which were designated B, C, C-I and C-II. The tumor inhibition ratios of these fractions ranged from 46% to 75% against the solid forms of sarcoma 180 in ICR mice at doses of 20 and 50 mg/kg/day when given intraperitoneally. Especially, Fr. C which was named Collyban(CB) exhibited a marked life-prolonging effect of the mice against ascitic forms of sarcoma 180 at a dose of 50 mg via i.p. administration. To extend spectra of the antitumor activities and eliminate the effects of allograft rejection, the characterization of antitumor effects of CB was performed in syngeneic host-tumor systems. It did not show any antitumor activity against L1210 murine leukemia in $CD_2Fl$ mice but prolonged their life span against ascitic forms of $MM_{46}$ carcinoma in $C_3H/He$ mice. Also it exhibited antitumor activity against human cervical cancer HeLa cells that were xenografted into nude mice having BALB/c genetic backgrounds by the i.p. injection at a dose of 100 mg/kg/day. In order to characterize the antitumor components, CB was examined by chemical analysis. It was acidic protein-bound polysaccharides composed of 31% polysaccharide, 27% protein and 3% hexosamine. CB was fractionated into two fractions, Fr. C-I(M.W.: 500 Kd) and Fr. C-II(M.W.:30 and 8 Kd) by Sephadex G-200 gel filtration chromatography.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.17 no.2
• /
• pp.58-65
• /
• 2019

Purpose: Alpha-amanitin induces potent oxidative stress and apoptosis, and may play a significant role in the pathogenesis of hepatotoxicity. This study examined the mechanisms of α-amanitin-induced apoptosis in vitro, and whether green tea extract (GTE) offers protection against hepatic damage caused by α-amanitin (AMA) induced apoptosis in vivo. Methods: The effects of GTE and SIL on the cell viability of cultured murine hepatocytes induced by AMA were evaluated using an MTT assay. Apoptosis was assessed by an analysis of DNA fragmentation and caspase-3. In the in vivo protocol, mice were divided into the following four groups: control group (0.9% saline injection), AMA group (α-amanitin 0.6 mg/kg), AMA+SIL group (α-amanitin and silibinin 50 mg/kg), and AMA+GTE group (α-amanitin and green tea extract 25 mg/kg). After 48 hours of treatment, the hepatic aminotransferase and the extent of hepatonecrosis of each subject was evaluated. Results: In the hepatocytes exposed to AMA and the tested antidotes, the cell viability was significantly lower than the AMA only group. An analysis of DNA fragmentation showed distinctive cleavage of hepatocyte nuclear DNA in the cells exposed to AMA. In addition, the AMA and GTE or SIL groups showed more relief of the cleavage of the nuclear DNA ladder. Similarly, values of caspase-3 in the AMA+GTE and AMA+SIL groups were significantly lower than in the AMA group. The serum AST and ALT levels were significantly higher in the AMA group than in the control and significantly lower in the AMA+GTE group. In addition, AMA+GTE induced a significant decrease in hepatonecrosis compared to the controls when a histologic grading scale was used. Conclusion: GTE is effective against AMA-induced hepatotoxicity with its apoptosis regulatory properties under in vitro and in vivo conditions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.2
• /
• pp.114-117
• /
• 2007

The effects of faecally excreted ivermectin on the survival and growth of the common Korea earthworm Eisenia fetida (Savigny), have been studied in the laboratory. Cow dung was collected 1, 2, 3 and 7 days after ivermectin subcutaneous injection. The mortality of the worms provided with untreated dung was 0% whereas mortality within a week was high as 73.7%, 98.3% in dung which were excreted 1 and 2 days from dosing, respectively. The growth rate of the worms fed dung from 1 day excreted dung from cattle given ivermectin was 75% lower than that recorded on the control. In total number of hatchling earthworm in each treatment, 1 day after treatment produced the lowest compared with untreated control. However, dung from cattle treated with ivermectin did not prevented the rate of hatchling from each cocoon of earthworm. The results show that ivermectin is less toxic to $2^{nd}$ generation of earthworm. We concluded that ivermectin have adverse effects on the survival and growth of E. fetida when exposed through dung under laboratory conditions. This results will be discussed in relation to the effects of anthelmintics on non-target organism in our ecosystem.

• Journal of Korea Technology Innovation Society
• /
• v.22 no.3
• /
• pp.362-381
• /
• 2019

The purpose of this study is to examine how two factors among various affecting factors of technological innovation, i.e. sectoral system of innovation and R&D support service, were actually applied in the case of NUC Electronics. This company has achieved high level of innovation performance through change of injection port and improvement of extracting rate. This was possible because each component of sectoral system of innovation system was matched with the innovation activity. The improvement of the performance in NUC Electronics was attributable to its own innovation efforts and R&D support service of government research institute. In the process of technological innovation, the company could receive high-level services in areas such as product design and virtual experiments that companies can not solve themselves. It can be said that the role of government and public institutions to support the shortage of SMEs was important. In terms of each component of sectoral system of innovation, we found that there were many opportunities of new technology; sustainability was low; imitation was easy; appropriability was low but it has dualily; accumulation of technology was relatively high, availability of external knowledge was high. At the same time, both of the company and the network played an important role, and market conditions were very favorable. In terms of R&D support services, it is a direct effect that a great deal of time and cost savings have been achieved through virtual experiments on the material and shape of the screw. As an indirect effect, the core competence of the company has been greatly strengthened by utilizing the momentum of technology development through external support, hence the company could establish the structure of virtuous circle of innovation.

• Tunnel and Underground Space
• /
• v.29 no.4
• /
• pp.262-279
• /
• 2019

In the engineering barriers of high-level radioactive waste disposal, gases could be generated through a number of processes. If the gas production rate exceeds the gas diffusion rate, the pressure of the gas increases and gases could migrate through the bentonite buffer. Because people and the environment can be exposed to radioactivity, it is very important to clarify gas migration in terms of long-term integrity of the engineered barrier system. In particular, it is necessary to identify the hydro-mechanical mechanism for the dilation flow, which is a very important gas flow phenomenon only in medium containing large amounts of clay materials such as bentonite buffer, and to develop and validate new numerical approach for the quantitative evaluation of the gas migration phenomenon. Therefore, in this study, we developed a two-phase flow model considering the mechanical damage model in order to simulate the gas migration in the engineered barrier system, and validated with 1D gas flow modelling through saturated bentonite under constant volume boundary conditions. As a result of numerical analysis, the rapid increase in pore water pressure, stress, and gas outflow could be simulated when the dilation flow was occurred.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.99-107
• /
• 2018

This research has developed a high temperature steam cleaning technology using a ceramic membrane with durability against temperature and pressure conditions. In steam cleaning, steam of $120^{\circ}C$ is injected into the ceramic membrane to induce pyrolysis by the endothermic reaction to remove fouling from the membrane. The water quality of raw water was adjusted to turbidity 10, 25 NTU and DOC 2.5 mg/L, and the membrane was uniformly fouled by constant pressure operation at 100, 200, and 300 kPa. Physical backwashing was performed with water and air at a pressure of 500 kPa and steam at $120^{\circ}C$ was injected for 0 to 5 minutes. As the turbidity concentration and the operating pressure increased, the flux decreased by 0.7 to 14.4%. It is confirmed that 10.7 to 53.8% recovery is possible than physical cleaning at the injection of steam for 3 minutes, so it is considered that the steam cleaning of the ceramic membrane is effective. Compared with CEB after NaOCl (300 mg/L) filtration at 25 NTU and 300 kPa of turbidity, the steam cleaning result for 3 minutes was similar to 46.7% of CEB for 3 hours. It has been confirmed that steam cleaning is suitable for a ceramic membrane having excellent heat resistance against high temperature. It was considered to have better cleaning efficiency as compared with general physical backwashing.

• Journal of the Korean Chemical Society
• /
• v.66 no.3
• /
• pp.202-208
• /
• 2022

In this study, we tried to obtain the optimal conditions to reduce odors generated from pig wastewater using magnesia (MgO) through in-situ test after producing a reactor for removing odors. For this purpose, the filling amount of magnesia, the injection amount of pig wastewater, the aeration method, the aeration amount and the aeration time were considered. The field experiment was conducted at Cheongwoon Livestock Farm, which has a pig wastewater reservoir. As the amount of magnesia added to the weight of wastewater (500 kg) increases, the amount of ammonia (NH₃) and hydrogen sulfide (H₂S) generated tended to gradually decrease. As a result of the test, ammonia and hydrogen sulfide in the pig wastewater decreased up to 65% and 77%, respectively, for 2 days aeration after 0.8% of magnesia was added to the reaction tank. The initial pH of the pig wastewater in the reactor was 8.2, and the pH was found to be 9.2 when magnesia was added up to 0.8%. In the light of this trend, it can be known that magnesia gradually increases the pH in the pig wastewater and makes it weakly alkaline. As the pH increases, part of the ammonia gas present in the pig wastewater vaporizes into the air and the remaining part is removed by precipitation after chemical bonding with dissolved magnesium ions and phosphate ions. In order to remove the odor of pig wastewater and turn it into compost, most of the existing livestock farms go through a six-month aeration process using microorganisms. In contrast, the current study proved the effect of removing odors from pig wastewater within 2 days through chemical reactions that do not affect microbial activity.

• Particle and aerosol research
• /
• v.18 no.1
• /
• pp.9-21
• /
• 2022

In this study, a novel antiviral coating method for the air filtration system of subway station was investigated. Using dry aerosol coating process, we developed a high-performance antiviral air filter with spark discharger and carbon brush type ionizer. Silver nanoparticles were produced by a spark discharge generation system with ion injection system and were used as antiviral agents coated onto a medium grade air filter. The pressure drop, filtration efficiency, and antiviral ability of the filter against aerosolized MS2 virus particles as a surrogate of SARS-CoV-2 virus were tested with dust contamination. Dust contamination caused the increase of the filtration efficiency and pressure drop, while the antiviral agents (in this study, silver nanoparticles) coating did not have any significant effect on the filtration efficiency and pressure drop. Using these properties, we suggested a novel method to maximize the antiviral performance of the antiviral air filter that was contaminated by dust particles. Moreover theoretical analysis of antiviral ability with dust contamination and re-coated antiviral agents was carried out using a mathematical model to calculate the time-dependent antiviral effect of the filter under actual conditions of subway station. Our model can be used to apply on antiviral air filtration system of subway station for prevention of pandemic diffusion, and predict the life cycle of an antiviral filter.