• International Journal of Industrial Entomology and Biomaterials
• /
• v.20 no.2
• /
• pp.75-77
• /
• 2010

Until now, the main treatment for impotence has been the vasodilator injection, penile implants and etc. Among many methods, most effective way is known to be the medical therapy. The oral drug for an impotence remedy has to be above all, effective to the erection, and second, safety when taking in long-term. However, so far the drug in such condition and sufficiency has not been discovered. Consequently, it is crucial to develop the new medicine, made of natural materials only, without any uncertainty of side effect. The silkworm is very difference in physiological chemical change according to growth stage. Therefore the functional effect shows a very big difference according to preparation method with a growth stage. This research carry out the experiment with the pupa powder immediately before the eclosion, eclosion adult, the pupa extract immediately before the eclosion, and the silkworm powder of 5 instar 3rd day. The result showed not a big chance in weight, feed and water intake quantity. But testosterone hormone secretion effects of the freeze drying powder of the pupa immediately before the eclosion was very high 7.31 ng/ml, compared to 2.37 ng/ml of non treatment and 2.67 ng/ml of alcohol extraction method. As this result, the freeze drying pupa powder of the pupa immediately before the eclosion was confirmed to promote the secretion of the testosterone hormone more than alcohol extraction method of existing.

• Geomechanics and Engineering
• /
• v.17 no.5
• /
• pp.465-473
• /
• 2019

Biocementation due to the microbially induced calcium carbonate precipitation (MICP) process is a potential technique that can be used for soil improvement. However, the effect of biocementation may be affected by many factors, including nutrient concentration, bacterial strains, injection strategy, temperature, pH, and soil type. This study investigates mainly the effect of chemical concentration on the formation of calcium carbonate (e.g., quantity, size, and crystalline structure) and unconfined compressive strength (UCS) using different treatment time and chemical concentration in the biotreatment. Two chemical concentrations (0.5 and 1.0 M) and three different treatment times (2, 4, and 8 cycles) were studied. The effect of chemical concentrations on the treatment was also examined by making the total amount of chemicals injected to be the same, but using different times of treatment and chemical concentrations (8 cycles for 0.50 M and 4 cycles for 1.00 M). The UCS and CCC were measured and scanning electron microscopy (SEM) analysis was carried out. The SEM images revealed that the sizes of calcium carbonate crystals increased with an increase in chemical concentrations. The UCS values resulting from the treatments using low concentration were slightly greater than those from the treatments using high concentration, given the CCC to be more or less the same. This trend can be attributed to the size of the precipitated crystals, in which the cementation efficiency increases as the crystal size decreases, for a given CCC. Furthermore, in the high concentration treatment, two mineral types of calcium carbonate were precipitated, namely, calcite and amorphous calcium carbonate (ACC). As the crystal shape and morphology of ACC differ from those of calcite, the bonding provided by ACC can be weaker than that provided by calcite. As a result, the conditions of calcium carbonate were affected by test key factors and eventually, contributed to the UCS values.

• Design & Manufacturing
• /
• v.17 no.2
• /
• pp.22-26
• /
• 2023

As Light-Emitting Diodes(LEDs) continue to advance in performance, their application in automotive lamps is increasing. Automotive LEDs utilize light guides not only for aesthetics but also to control light quantity and direction. Light guides employ patterns of a few hundred micrometers(㎛) to regulate the light, and the surface roughness(Ra) of these patterns can reach tens of nanometers(nm). Given that these light guides are produced through injection molding, mold processing technology with high surface quality micro-patterns is required. This study serves as a preliminary investigation into the development of high surface quality micro-pattern processing technology. It examines the surface roughness of the workpiece based on the cutting direction of the pattern and the cutting fluid type when cutting micro-patterns on STAVAX steel using cubic Boron Nitride(cBN) tools. The experiments involved machining a step-shaped micro-pattern with a height of 60 ㎛ and a pitch of 400 ㎛ in a 22×22 mm area under identical cutting conditions, with only the cutting direction and cutting fluid type being varied. The machining results of four cases were compared, encompassing two cases of cutting direction(parallel to the pattern, orthogonal to the pattern) and two cases of cutting fluid type (flood, mist). Consequently, the Ra value was found to be the highest(Ra 128.33 nm) when machining with the flood type in parallel to the pattern, while it was the lowest(Ra 95.22 nm) when machining with the mist type orthogonal to the pattern. These findings confirm that there is a difference of up to 25.8 % in the Ra value depending on the cutting direction and cutting fluid type.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.1
• /
• pp.1-10
• /
• 2024

In-situ carbonation technology represents a form of mineral carbonation that integrates CO₂ into the fabrication process of cementitious construction materials, capturing CO₂ as calcium carbonate(CaCO₃) through a reaction between calcium ions(Ca²⁺) and CO₂ released during cement hydration. This investigation examines the application of in-situ carbonation technology to a variety of floor dry cement mortar formulations commonly used in local construction projects. It assesses the effects of varying the CO₂ injection flow rate and total volume of CO₂ injected. Additionally, the study evaluates the impact of reducing the quantity of cement used as a binder on the final product's quality.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.26-29
• /
• 2011

Purpose: The general test method of the Korean Pharmacopeia specifies the test method on the clauses of quality control after manufacturing. According to KFDA Guidance for Medicines, standards of residual solvents regulates the maximum permissible dose of acetonitrile as 400 ppm, ethanol as 5,000 ppm, and acetic acid as 5,000 ppm. This study aims at identifying the type of resiual solvents in the final [F-18]FDG vial of an automatic synthesizer and measure its residual quantity. Materials and Methods: The center carried out residual solvents test of [F-18]FDG injection using Agilent Technologies 7890A with a Flame Ionization Detector. The column of Agilent Technologies 7890A used in measuring of residual solvents was CP WAX column ($30m{\times}0.53mm{\times}1.0{\mu}m$) and analysis condition was split mode 1:1 at the initial temperature $70^{\circ}C$ which was increased $20^{\circ}C/minute$ after two minutes and maintained at the final $140^{\circ}C$ for two minutes. The analysis method was as following: Firstly, ethanol-acetonitrile-acetic acid mixture was classified into four types of concentration (250-25-250 ppm, 1,000-100-1,000 ppm, 3,000-300-3,000 ppm, and 6,000-600-6,000 ppm), and $1.0{\mu}L$ of each type of concentration was injected into gas chromatography followed by an analysis of its peak domain. Then, a calibration-curve by the external standard method was drawn based on the analysis result. Results: While ethanol and acetonitrile were detected in TRACERlab MX, FASTlab had additional acetic acid. The residual quantity of the ethanol-acetonitrile-acetic acid mixture evaluated using the calibration-curve was average 72 ppm ethanol, 54 ppm acetonitrile, and 1030 ppm acetic acid for FASTlab, whereas average 439 ppm ethanol and 79 ppm acetonitrile for TRACERlab MX. This indicated that both of them were within the maximum permissible dose. Conclusion: Solvent residues in the [F-18]FDG injection were all within maximum permissible doses and proper to be used to examine a patient. The result indicated that types and quantities of solvent resides of radioactive pharmaceuticals vary depending on the automatic synthesizer.

• Journal of Chest Surgery
• /
• v.43 no.6
• /
• pp.588-595
• /
• 2010

Background: Base on types of tumor, the types of expressed tumor is diverse and the difference in its expression rate is even more various. Due to such reasons an animal model is absolutely needed for a clinical research of lung cancer. The author attempted oncogenesis by cultivating a cell line of non-small cell carcinoma and then injecting it inside thoracic cavities of nude mice. The author conducted quantitative analyses of HER2/neu tumor gene - an epidermal growth factor receptor (EGFR) related to lung cancer, and TGF-${\beta}_1$, which acts as a resistance to cell growth inhibition and malignant degeneration. In order to investigate achievability of the oncogenesis, histological changes and the expression of cancer gene in case of orthotopic lung cancer is necessary. Material and Method: Among 20 immunity-free male BALB/c, five nude mice were selected as the control group and rest as the experimental group. Their weights ranged from 20 to 25 gm (Orient, Japan). After injection of lung cancer line (SW900 G IV) into the pleural cavity of nude mice, They were raised at aseptic room for 8 weeks. HER2/neu was quantitatively analyzed by separating serum from gathered blood via chemiluminiscent immunoassay (CLIA), and immunosandwitch method was applied to quantitatively analyze TGF-${\beta}_1$. SPSS statistical program (SPSS Version 10.0, USA) was implemented for statistical analysis. Student T test was done, and cases in which p-value is less than 0.05 were considered significant. Result: Even after lung cancer was formed in the normal control group or after intentionally injected lung cancer cell line, no amplification of HER2/neu gene showed reaction. However, the exact quantity of TGF-${\beta}_1$ was $28,490{\pm}8,549pg/mL$, and the quantity in the group injected with lung cancer cell was $42,362{\pm}14,449pg/mL$, meaning 1.48 times highly Significant (p<0.483). It proved that HER2/neu gene TGF-${\beta}_1$ had no meaningful interconnection. Conclusion: TGF-${\beta}_1$ gene expressed approximately 1.48 times amplification in comparison to the control group. The amplification of TGF-${\beta}_1$ meant somatic recuperation inhibition mechanism due to carcinogenesis in nude mice was definitely working. It may be implemented as a quantitative analysis that allows early detection of lung cancer in human body.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.211-216
• /
• 2000

In this paper, experimental investigations were carried out to remove NOx, SOx simultaneously from a simulated combustion flue gas [$NO(0.02%)-SO_2(0.08%)-CO_2-Air-N_2$] by using a pulse corona induced plasma chemical processing. Discharge domain of wire-cylindrical plasma reactor was separated from a gas flow duct to avoid unstable discharge by aerosol particle deposited on discharge electrode and grounded electrode. The NOx, SOx removal was experimentally investigated by a reaction induced to ammonium nitrate, ammonium sulfate using a low price of aqueous NaOH solution and a small quantity of ammonia. Volume percentage of aqueous NaOH solution used was 20% and $N_2$ flow rate was $2.5{\ell}/min$ for bubbling aqueous NaOH solution. Ammonia gas(l4.82%) balanced by argon was diluted by air and was introduced to a main simulated flue gas duct through $NH_3$ injection system which was in downstream of reactor. The $NH_3$ molecular ratio(MR) was determined based on [$NH_3$] and [$NO+SO_2$]. MR is 1.5. The NOx removal rates increased in the order of DC, AC and pulse, but SOx removal rates was not significantly effected by source of electricity. The NOx removal rate slightly decreased with increasing initial concentration. but SOx removal rate was not significantly affected by initial concentration. The NOx, SOx removal rates decreased with increasing gas flow rate.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.12
• /
• pp.35-41
• /
• 2020

Recently, underground spaces have been developed variously due to the concentration of the building structure in downtown area and reconstruction of the apartment. However, various problems such as differential settlement are occurring in the waterproof and reinforcement construction. In grouting method, which is frequently used for the ground reinforcement, quality control was performed by measuring the injection quantity of grouting materials and performing laboratory tests using boring samples, but it is difficult to determine whether the ground reinforcement has been performed properly during the construction stage. In order to solve this problem, a research is needed to carry out quality control by measuring electric resistivity after grouting is performed using grouting materials mixed with conductive materials. In this research, as a basic study of the new grouting method using conductive materials, uniaxial compression tests were performed using cement specimen with 0, 3, 5, 7% of carbon fiber to evaluate the effect of conductive material on the performance of grouting material. Based on the test results, the uniaxial compressive strength is increased with the mixed proportion of the carbon fiber increase. Furthermore, the carbon fiber can also affect on the early-strength of the grouting materials.

• Journal of Pharmacopuncture
• /
• v.2 no.1 s.2
• /
• pp.135-152
• /
• 1999

To investigate effects of Taraxaci herbal-acupuncture on Adjuvant Arthritis in rats, the edema rate, the number of WBC, the quantity of total protein, albumin and globulin in the blood serum and histological test of the muscular tissue were measured in the arthritis part. 1. After elicitating arthritis of Sprague Dawely(SD) rats by injection of Freund's complets adjuvant for 2 weeks, saline was injected for the Exp. I group and Taraxaci herbal-acupuncture was injected for the Exp. II group during 30days. Selected point was $ST_{35}$ in both the groups. And then the volume of the paw were checked. The volume of paw was $0.84{\pm}0.14mm$ in the Exp. I group and $0.38{\pm}0.17mm$ in the Exp. II group, the swelling of the paw was restricted significantly in the Exp. II group(p<0.05) 2. The number of WBC was $10.34{\pm}0.14(10^3/ml)$ in the normal group and $37.47{\pm}5.46(10^3/ml)$ in the Exp. I group. It was $20.39{\pm}4.23(10^3/ml)$ in the Exp. II group. This fact showed that the group Exp. II was more effective than the Exp. I group in the treatment of arthritis(p<0.05) 3. The content of the total protein in the blood serum was $6.14{\pm}0.43g/dl$ in the normal group, $7.95{\pm}0.94g/dl$ in the Exp. I group, and $6.38{\pm}1.75g/dl$ in the Exp. II group. This fact showed that the group Exp. II was more effective than the Exp. I group in the treatment of arthritis(p<0.05) 4. The contents of albumin in the blood serum was $2.94{\pm}0.13g/dl$ in the normal group, $2.01{\pm}0.48g/dl$ in the Exp. I group. and $2.71{\pm}0.34g/dl$ in the Exp. II group. This fact showed that the group Exp. II was more effective than the Exp. I group in the treatment of arthritis(p<0.05) 5. The contents of globulin in the blood serum was $3.19{\pm}0.48g/dl$ in the normal group, $4.70{\pm}1.26g/dl$ in the Exp. I group. and $3.67{\pm}0.56g/dl$ in the Exp. II group. There was no significance in the serum globulin between Exp. II group and Exp. I group from the stastical analysis 6. In histological finding, because of severe inflammatory reaction, remarkably irregular tissue and large amount of inflammatory cells were found in the Exp. I group. But the Exp. II group showed small amount of inflammatory cells, the refrained inflammatory state and even recovering state. From these results, it is showed Taraxaci herbal-acupuncture refrain inflammatory reaction and muscular tissue necrosis in SD rats paw were induced by Freund's complete adjuvant

• Journal of Pharmacopuncture
• /
• v.2 no.1 s.2
• /
• pp.93-109
• /
• 1999

To investigate effects of Achyranthis Radix herbal-acupuncture on adjuvant arthritis in rats, the edema rate, the number of WBC, the quantity of total protein, albumin and globuline in the blood serum and histological test of the muscular tissue were measured in the arthritis part. 1. After elicitating arthritis of Sprague dawley(SD) rats by injection of Freund's complete adjuvant for 2 weeks, normal saline was injected for the Exp. I group and Achyranthis Radix herbal-acupuncture was injected for the Exp. II group during 30days. Selected point was $D\acute{u}b\acute{i}(ST_{35})$ in both the groups. And then the volume of the paw were checked. The volume of the paw was $0.84{\pm}0.14mm$ in the Exp. I group and $0.47{\pm}0.11mm$ in the Exp.II group, the swelling of the paw was restricted significantly in the Exp. II group(p<0.05). 2. The number of WBC was $10.34{\pm}0.14(10^3/ml)$ in the normal group and $37.47{\pm}5.46(10^3/ml)$ in the Exp. I group. It was $21.24{\pm}2.58(10^3/ml)$ in the Exp. II group. This fact showed that the group Exp. II with Achyranthis Radix herbal-acupuncture was more effective than the Exp. II group in the treatment of arthritis(p<0.05). 3. The content of the total protein in the blood serum was $6.14{\pm}0.43g/dl$ in the normal group, $7.95{\pm}0.94g/dl$ in the Exp. I group, and $6.41{\pm}0.68g/dl$ in the Exp. II group. There was no significance in total protein between the Exp. II group and the Exp. I group from the statistical analysis. 4. The content of albumin in the blood serum was $2.94{\pm}0.13g/dl$ in the normal group, $2.01{\pm}0.48g/dl$ in Chang Tong-young the Exp. I group and $3.15{\pm}0.27g/dl$ in the Exp. II group. This fact showed that the Exp. II group had significant increase in the serum albumin from the statistical analysis compared with the Exp. I group. 5. The content of the globulin in the blood serum was $3.19{\pm}0.48g/dl$ in the normal group, $4.70{\pm}1.26g/dl$ in the Exp. I group and $3.26{\pm}0.57g/dl$ in the Exp. II group. There was no significance in the serum globulin between the Exp. II group and Exp. I group from the statistical analysis. 6. In histological finding, because of severe inflammatory reaction, remarkably irregular tissue and large amount of inflammatory cells were found in the Exp. I group. But the Exp. II group showed small amount of inflammatory cells, the refrained inflammatory state and even recovering state.