• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.7
• /
• pp.1032-1037
• /
• 2009

The present experiment was conducted to study the effects of partial replacement of spray-dried porcine protein (SDPP) or fish meal with soybean and shrimp protein hydrolysate (SSPH) on growth performance, nutrient digestibility and serum biochemical parameters in weaned pigs. Two hundred and forty 21${\pm}$2 d old pigs ((Pietrain${\times}$Duroc)${\times}$(Landrace${\times}$Large Yorkshire)) with initial weight of 6.9${\pm}$0.5 kg were randomly allocated to five dietary treatments with six replicates per treatment and eight piglets per replicate. The control diet (T1) contained 2% SDPP and 6% fishmeal, and SDPP for experimental diets T2 and T3 was replaced with 1% and 2% SSPH, respectively, on an iso-nitrogenous basis. The fishmeal for experimental diets T4 and T5 was replaced with 1% and 2% SSPH, respectively, also on an iso-nitrogenous basis. The experimental period was 21 days. The results showed that weaned piglets fed the diets containing 1% and 2% SSPH as a replacement for SDPP had similar average daily gain (ADG), average daily feed intake (ADFI), feed/gain (F/G), diarrhea rate and serum biochemical indices e.g. blood urea nitrogen (BUN), total serum protein (TP), albumin to globulin ratio (A/G), globulin (GLO), serum glucose (GLU), and immunoglobulin G (IgG) to those fed the control diet during 0-10 d and 0-21 d of the experiment. The substitution of 1% SSPH on an iso-nitrogenous basis for fish meal appeared to be beneficial for ADG (p = 0.59) and ADFI (p = 0.23) of piglets during the overall period. The digestibility of calcium was higher (p<0.01) in pigs fed diets containing SSPH than on the control diet. Addition of 1% SSPH on an iso-nitrogenous basis for fish meal could increase the digestibilities of dry matter and energy of the diet. Dietary replacement of fish meal with 1% and 2% SSPH had no effect on the concentrations of BUN, TP, A/G, GLO, GLU, and IgG. In conclusion, dietary SDPP or fish meal could partially replace SSPH without any adverse effect on growth performance, nutrient digestibility and serum biochemical parameters in weaned piglets.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.2
• /
• pp.64-69
• /
• 2006

Cathode materials of Al-doped $Li(Ni_{1/3}Co_{1/3}Mn_{1/3-x}Al_x)O_2$ (x=0.0, 0.005, 0.01 0.05) for lithium ion batteries were synthesized with ultra-sonic spray pyrolysis method and single-step heat treatment. No secondary phases were found in all synthesized powders. The intensity ratio of $I_{003}\;to\;I_{104}$, however, slightly decreased and the particle size increased with the Al contents. The cells with bare, 0.5 and 1.0 at% Al-doped powders showed the initial discharge capacities of 182, 180 and $184mAhg^{-1}$ in a voltage range of $3.0\sim4.5V$ at 1C rate, and the capacity retentions of 81, 77 and 78% at the end of 30 cycles, respectively. But in the voltage range of $3.0\sim4.6V$, the Al-doping significantly enhanced the cycle stability. For example, the discharge capacity after 50 cycles was maintained to 70% in the 0.5 at% Al-doped sample compared to only 30% in no doped sample. The improvement of the cycle stability was thought to be due to $Mn^{3+}$ ion decrease as the Al doping from the XPS analysis results.

• Journal of the Korean Institute of Gas
• /
• v.19 no.4
• /
• pp.22-28
• /
• 2015

In order to keep the competitiveness of LPG fuel for transportation fuel, the difference in fuel consumption with gasoline and cost for an aftertreatment system should be reduced with continuous development of technology for LPG engine. In the present study, spray-guided type direct injection combustion system, whose configuration is composed of direct injector in the vicinity of spark plug, was employed to realize stable lean combustion. A certain level of nitrogen oxides($NO_x$) emits due to a locally rich mixture regions in the stratified mixture. With the application of EGR system for the reduction of $NO_x$, 15% of $NO_x$ reduction was achieved whereas fuel consumption and hydrocarbon emission increased. By the application of EGR, the combustion speed reduced especially appeared at initial flame development period and peak heat release rates and increasing rates for heat release rate decreased as EGR rate increased due to the dilution effect of intake air.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.87-95
• /
• 2020

As an experimental study on the corrosion behavior of steel materials to which ATMS method using EIS was applied in concrete, immersion of Ca(OH)₂ saturated aqueous solution and NaCl aqueous solution simulating the environment inside concrete The corrosion behavior was tested. The equivalent circuit was derived through the analysis of the Nyquist plot, and the interfacial resistance and the polarization resistance of the Ca(OH)₂ aqueous solution were compared, and Al ATMS was the best interfacial resistance and Zn ATMS was the best polarization resistance. After burying ATMS steel material of cement mortar, the initial immersion impedance measurement value was the highest in the Zn ATMS test body in the impedance measurement by the immersion time by immersing it in the NaCl aqueous solution. Al ATMS test piece has the highest impedance and is highly reliable. This is because Al, which has a high ionization tendency, is continuously oxidized in a strong alkaline environment to form a film and protect the steel from permeation of chlorine ions.

• Clean Technology
• /
• v.29 no.3
• /
• pp.178-184
• /
• 2023

Transition metal chalcogenides have garnered significant attention as anode materials for sodium-ion batteries due to their high theoretical capacity. Nevertheless, their practical application is impeded by their limited lifespan resulting from substantial volume expansion during cycling and their low electrical conductivity. To tackle these issues, this study devised a solution by synthesizing a nanostructured anode material composed of porous CNT (carbon nanotube) spheres and (Ni,Co)Se₂ nanocrystals. By employing spray pyrolysis and subsequent heat treatments, a porous-structured (Ni,Co)Se₂-CNT composite microsphere was successfully synthesized, and its electrochemical properties as an anode for sodium-ion batteries were evaluated. The synthesized (Ni,Co)Se₂-CNT microsphere possesses a porous structure due to the nanovoids that formed as a result of the decomposition of the polystyrene (PS) nanobeads during spray pyrolysis. This porous structure can effectively accommodate the volume expansion that occurs during repeated cycling, while the CNT scaffold enhances electronic conductivity. Consequently, the (Ni,Co)Se₂-CNT anode exhibited an initial discharge capacity of 698 mA h g^-1 and maintained a high discharge capacity of 400 mA h g^-1 after 100 cycles at a current density of 0.2 A g^-1.

• Korean journal of applied entomology
• /
• v.50 no.2
• /
• pp.151-156
• /
• 2011

Economic injury levels (EILs) and economic control threshold (ET) were estimated for the Tea red spider mite, Tetranychus kanzawai Kishida(Acari, Tetranychidae) in Rubus coreanus Miquel. T. kanzawai density increased until the early-July and thereafter decreased in all plots except the non-innoculation plot where initial density of the mite were different each 0, 5, 10, 20 and 40 adults per plant branch on May 7 in 2008. And the occurrence of the densities were increased higher innoculated density than different innoculation density. The yield was decreased with increasing initial mite density and thereby the rates of yield loss was increased with increasing initial mite density. And T. kanzawai occurrence density, yields and the rates of yield loss, where initial density of the mite were different each 0, 2, 5, 10 and 20 adults per plant branch on May 8 in 2009 were similar tendency to 2008 year results. The relationship between initial T. kanzawai densities and the yield losses was well described by a linear regression, Y = 0.6545X + 3.0425 ($R^2$ = 0.93) in 2008, Y = 0.9031X + 2.0899($R^2$ = 0.96) in 2009. Based on the relationship, the number of adults per plant branch(EILs) which can cause 5% loss of yield was estimated to be approximately 3.0 in 2008 and 3.2 in 2009. And the ET was estimated to be approximately 2.4 in 2008 and 2.6 in 2009. The relationship between initial T. kanzawai densities and occurrence density of mid-May considering the best spray timing against T. kanzawai was well described by a linear regression, Y = 0.471X + 2.495($R^2$ = 0.95) in 2008, Y = 0.9938X + 3.1858($R^2$ = 0.96) in 2009. Based on the relationship, the number of adults per leaf(ET) in mid-May which can cause 5% loss of yield was estimated to be approximately 3.6 in 2008 and 5.8 in 2009.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.5
• /
• pp.213-218
• /
• 2002

In order to develop the economic and environmental water-soluble black coloring agent, some adequate chemical mixtures were mixed and this solution was applied to coat quenched and tempered 51B20 steel bolt. Some basic properties of the solution and characteristics of the coated film in addition to the corrosion resistance were investigated. The developed 100 kg of water-soluble black coloring agent solution was a chemical mixture consisted of 10 kg of aqueous coloring agent, 40 kg of surface active agent, 0.3 kg of anti-foam agent and $50{\ell}$ of water. The coated film of the bolt was composed of hard layer of about $2{\mu}m$ and the disbondable soft layer of about $4{\mu}m$ above the hard layer. Many surface active agents peaks and a few hydrophilic peaks were observed in the coated film. Surface roughness value of the coated bolt was lower than that of the non-coated bolt. Corrosion resistance of the coated bolt considerably improved and also relatively showed a good polarization resistance at test condition of $40^{\circ}C$ colorizing temperature and 5% the solution concentration in 3% NaCl anodic polarization test. Initial appearance time of the surface rust was greatly retarded owing to the coated film in salt spray test.

• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.315-321
• /
• 2007

Aminated PONF-9-GMA ion exchange fabrics were synthesized by radiation induced graft copolymerization. Hybrid ion exchange fabrics combined with aminated PONF-g-GMA fabrics and anionic ion exchange resin were also fabricated by hot melt adhesion method and then their adsorption properties were investigated. Ion exchange capacity of the hybrid ion exchange fabrics was higher than ion exchange fabric and was lower than bead resin. The maximum value was 4.18 meq/g. Adsorption breakthrough time for vanadium of the hybrid ion exchange fabric was 550 min, which was faster than bead resin but slower than fibrous ion exchanger. The Breakthrough time of the hybrid ion exchange fabrics gets longer with increasing pH. The initial breakthrough time occurred around 400 min with increasing vanadium concentration.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.405-409
• /
• 2010

New sol-gel precursors having the ability to protect iron against corrosion were synthesized and used to prepare organic-inorganic hybrid coatings based on epoxy. Bisphenol A epoxy was modified with 3-isocyanatopropyltriethoxysilane to improve the compatibility, and water and HCl were used as catalysts for sol-gel process. Various coating formulations were prepared depending on the type of sol-gel precursors and the amount of each ingredient, and cast on iron substrates by dip-coating and thermally cured. Corrosion protection properties of coated iron were studied by a salt spray test and electrochemical impedance spectroscopy under 0.1 M NaCl electrolyte. Hybrid coatings containing anticorrosive functional group exhibited excellent corrosion protection on iron, compared to that of typical hybrid coatings. From electrochemical impedance spectroscopy, the hybrid coatings containing anticorrosive functional group could maintaine the initial impedance after 500 h, while the impedance of hybrid coatings without them started to decrease after 24 h.

• Journal of the Korean Ceramic Society
• /
• v.45 no.3
• /
• pp.167-171
• /
• 2008

Zirconium-doped $Li_{1.1}Co_{1-x}Zr_xO_2(0{\leq}x{\leq}0.05)$ powders as cathode materials for lithium ion batteries were synthesized using an ultrasonic spray pyrolysis method. Cyclic voltammetry and cyclic stability tests were performed, and the changes of microstructure were observed. The solubility limit of zirconium into $Li_{1.1}CoO_2$ was less than 5 mol%, and monoclinic $Li_2ZrO_3$ phase was formed above the limit. The Zr-doping suppressed the grain growth and increased the lattice parameters of the hexagonal $LiCoO_2$ phase. The Zr-dopiong of 1mol% resulted in the best cyclic performance in the range of $3.0{\sim}4.3V$ at 1C rate (140 mA/g); the initial discharge capacity decreased from 158 mAh/g to 60 mAh/g in the undoped powder, while from 154 mAh/g to 135 mAh/g in the Zr-doped powder of 1 mol% after 30 cycles. The excellent cycle stability of Zr-doped powder was due to the low polarization during chargedischarge processes which resulted from the delayed collapse of the crystal structure of the active materials with Zr-doping.