• Journal of Mushroom
• /
• v.19 no.2
• /
• pp.81-87
• /
• 2021

Roridin E, produced by Podostroma cornu-damae, is a mycotoxin with anticancer activity. To increase the content of roridin E, submerged culture conditions were optimized using response surface methodology. Three factors, namely, medium initial pH, incubation time and agitation speed were optimized using a Box-Behnken design. The optimum submerged culture conditions to increase the content of roridin E included a medium with an initial pH of 4.0, an incubation time of 12.90 days, and an agitation speed of 63.03 rpm. The roridin E content in the submerged culture, under the aforementioned conditions, was 40.26 mg/L. The findings of this study can help lower the current price of roridin E and promote its related research.

• Fisheries and Aquatic Sciences
• /
• v.17 no.3
• /
• pp.385-390
• /
• 2014

Abalone immortal cell lines can be used to study the physiological properties and disease mechanisms of abalone at the cellular and molecular level. As a first step for the final goal to establish abalone immortal cell lines, we examined various initial culture conditions for primary cell populations derived from Haliotis discus hannai radula tissue. The survival rate after cell isolation procedures using the enzymatic method was as low as $9.95{\pm}2.37%$. Based on three different experimental conditions for H. discus hannai radula-derived cell culture, we found that the salinity of the media and the presence of growth-promoting factors were important to support radula-derived primary cell populations during the initial culture. The growth factor-containing media adjusted to 35 psu salinity could induce 100% (8 out of 8 trials) initial cell attachment, and the rate of cell attachment reached 50-70%. The data obtained from this study will provide useful information for developing immortal cell lines from abalone species.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.5
• /
• pp.863-869
• /
• 2001

A systematic study of microbial fuel cells comprised of alkalophilic Bacillus sp. B-31 has been carried out under various operating conditions. A significant amount of electricity was generated when redox mediators were used. Among the phenothiazine-type redox dyes tested, azure A was found to be the most effective both in maintaining a high cell voltage and for the long-term operation. The maximum efficiency was and for the long-term operation. The maximum efficiency was obtained at ca. $50^{\circ}C$ giving an open circuit voltage of 0.7V. A small change in temperature did not significantly affect the cell performance, but a rapid decrease in performance was observed below $20^{\circ}C$ and above $70^{\circ}C$. It was noticeable that fuel cell efficiency and discharge pattern depended strongly on the carbon source used in the initial culture medium. Regardless of the initial carbon sources, only glucose and trehalose were utilized as substrates. Galactose, however, was not substantially utilized except when galactose was used in the initial medium. Glucose, in particular, showed $87\%$ coulombic efficiency, which was the highest value ever reported, when Bacillus sp. was cultured in a maltose-containing medium. This study demonstrates that highly efficient microbial fuel cells can be constructed with alkalophilic microorganisms by fine-tuning the operating conditions and by carefully selecting carbon sources in the initial culture medium.

• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.121-125
• /
• 2015

Biohydrogen production from food waste via dark fermentation was conducted by using mixed culture under various environmental conditions (initial pH, initial F/M ratio, initial ferrous iron ($Fe^{2+}$), and temperature condition) in batch reactor. The results revealed that the maximum hydrogen yield of $46.19mL\;H_2/g\;COD_{add}$ was achieved at the optimal conditions (initial pH 8.0, initial F/M ratio 4.0, initial iron concentration 100 mg $FeSO_4/L$ and thermophilic condition ($55{\pm}1^{\circ}C$)). Furthermore, major volatile fatty acid (VFA) productions of butyrate (765.66 mg/L) and acetate (324.69 mg/L) were detected and COD removal efficiency was detected at 66.00%. Therefore, these optimal conditions could be recommended to operate a system.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.3
• /
• pp.450-459
• /
• 2017

This study evaluated the effects of culture conditions, including carbon and nitrogen sources, L-monosodium glutamate (MSG), and initial pH, on gamma-aminobutyric acid (GABA) production by Lactobacillus brevis HYE1 isolated from kimchi, a Korean traditional fermented food. L. brevis HYE1 was screened by the production analysis of GABA and genetic analysis of the glutamate decarboxylase gene, resulting in 14.64 mM GABA after 48 h of cultivation in MRS medium containing 1% (w/v) MSG. In order to increase GABA production by L. brevis HYE1, the effects of carbon and nitrogen sources on GABA production were preliminarily investigated via one-factor-at-a-time optimization strategy. As the results, 2% maltose and 3% tryptone were determined to produce 17.93 mM GABA in modified MRS medium with 1% (w/v) MSG. In addition, the optimal MSG concentration and initial pH were determined to be 1% and 5.0, respectively, resulting in production of 18.97 mM GABA. Thereafter, response surface methodology (RSM) was applied to determine the optimal conditions of the above four factors. The results indicate that pH was the most significant factor for GABA production. The optimal culture conditions for maximum GABA production were also determined to be 2.14% (w/v) maltose, 4.01% (w/v) tryptone, 2.38% (w/v) MSG, and an initial pH of 4.74. In these conditions, GABA production by L. brevis HYE1 was predicted to be 21.44 mM using the RSM model. The experiment was performed under these optimized conditions, resulting in GABA production of 18.76 mM. These results show that the predicted and experimental values of GABA production are in good agreement.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.6
• /
• pp.1115-1120
• /
• 2008

A novel cathepsin B inhibitor-producing bacterium was isolated from marine sediments and identified based on its 16S rDNA sequence as Pseudomonas sp. strain PB01 (Accession No. EU126129). The growth and enzyme inhibitor production were investigated under various culture conditions. A mixture of organic nitrogen source was required for the optimal production, whereas both glucose and maltose proved to be the effective carbon sources for cathepsin B inhibitor production. Other optimal culture conditions included temperature range between 25 and $28^{\circ}C$, initial medium pH of 6.6, and shaking speed of 200 rpm. Under these optimal conditions, the maximum inhibitory activity from culture broth was approximately 50% after 30 h of cultivation. Additionally, kinetic study revealed that inhibitor production paralleled with cell growth, which suggested that the inhibitor may be a primary metabolite of that bacterium.

• Journal of Microbiology and Biotechnology
• /
• v.1 no.4
• /
• pp.281-284
• /
• 1991

To investigate the optimum conditions for the production of ammonia as a precursor of tetramethylpyrazine flavor compound from arginine by Lactococcus lactis ssp. lactis biovar. diacetilactis FC1, fermentation factors such as initial pH of culture media, fermentation temperature, concentration of arginine-HC1, and sugars were examined. The optimum conditions were initial pH 5.5 of the culture media, fermentation temperature of $34^{\circ}C$, 6% (w/v) of arginine-HC1, and 1% (w/v) of galactose as a carbon source. Under the optimum fermentation conditions, 40 mmole/l of ammonia was produced after 40 h.

• KSBB Journal
• /
• v.25 no.1
• /
• pp.47-54
• /
• 2010

The mycelial dispersed growth of Cordyceps sinensis was optimized in submerged batch culture at initial pH of 5.0, 150 rpm, and $25^{\circ}C$. The morphological data showed much more dispersed growth of C. sinenesis at initial pH of 5.0. Also, projected area, main hyphal length and number of tips for the mycelial growth of initial pH 5.0 were higher than those of other initial pHs. The industrial medium for mycelial production of C. sinensis was determined to be molasses of 100 g and crushed brewery yeast of 10 g per liter as carbon and nitrogen sources, respectively. With these culture conditions, the maximum production of mycelia was approximately 30.0 g per liter by batch culture in 5-liter jar fermenter with no controlled pH. This result suggests that large-scale mycelia production of C. sinensis may be possible in submerged batch culture. The hot water extract of mycelia from C. sinensis was mainly composed of 83.0% carbohydrate, 11.8% protein, 1.9% lipid, and 2.4% ash and there were present glucose, mannose, galactose, and arabinose as molar ratio of 8.79 : 2.59 : 1.34 : 1.0 in the carbohydrate, respectively. In the experiment using spleen cell and macrophage, the extract showed potent mitogenic and immuno-stimulating activities and among various components, an important factor that contribute to the immunological activities was turned out to be carbohydrate moiety.

• Journal of Biosystems Engineering
• /
• v.24 no.1
• /
• pp.9-18
• /
• 1999

This study was performed to investigate the optimum microalgal culture conditions using flask culture and to find the feasibility of using the flue gas of the rice husk incinerator for cultivating the microalgae. The optimum initial pH of media was 4.5 for the microalgae culture, and the intermittently illuminated culture was more effective than the continuous illuminated culture. Thus, the balance between photosynthesis and formative metabolism must be considered thoroughly to cultivate microalgal cells. The optimum CO2 concentrations were in the range of 7 to 10%, and the optimum temperature was about 35$^{\circ}C$ in both the daytime and the nighttime for the culture. When flue gas of the rice husk incinerator was applied to the microalgae culture using stirred photobioreactor, the dry cell weight was 0.026 g dry biomass/hr$.$l. The results obtained in experiments indicated that the flue gas was effective for microalgae culture without any limitations.

• 한국전기화학회:학술대회논문집
• /
• 2000.10a
• /
• pp.47-47
• /
• 2000