• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제23권4호
• /
• pp.381-394
• /
• 2019

In this paper, we are extending fractional partial differential equations to fuzzy fractional partial differential equation under Riemann-Liouville and Caputo fractional derivatives, namely Variational iteration methods, and this method have applied to the fuzzy fractional wave equation with initial conditions as in fuzzy. It is explained by one and two-dimensional wave equations with suitable fuzzy initial conditions.

• 한국미생물·생명공학회지
• /
• 제22권5호
• /
• pp.522-530
• /
• 1994

Bacteriocin-producing lactic acid bacteria, Lactococcus sp. HY 449, was isolated from dairy products. Using response surface methodology, the various concentrations of medium compo- nents (tryptone, glucose, yeast extract, tween 80, and initial pH) were tested to find the optimum conditions for maximum bacteriocin production and growth of Lactococcus sp. HY 449. Central composite design was used to control the concentrations of medium components in the experiment. Bacteriocin production and cell growth of Lactococcus sp. HY 449 were most affected by glucose and yeast extract. Estimated optimum growth conditions of Lactococcus sp. HY 449 were as follows; tryptone 1.08%, glucose 1.129%, yeast extract 0.674%, tween 80 0.11%, and initial pH 7.19. Also estimated optimum conditions for bacteriocin production were tryptone 0.937%, glucose 1.108%, yeast extract 0.163%, tween 80 0.09%, and initial pH 6.98.

• 한국지능시스템학회논문지
• /
• 제13권1호
• /
• pp.102-106
• /
• 2003

In this paper, we study the controllability of fuzzy differential systems with nonlocal initial conditions. Result of this paper has improved and expanded in [5].

• 대한수학회논문집
• /
• 제37권2호
• /
• pp.497-502
• /
• 2022

Existence and uniqueness for fractional differential equations satisfying a general nonlocal initial or boundary condition are proven by means of Schauder's fixed point theorem. The nonlocal condition is given as an integral with respect to a signed measure, and includes the standard initial value condition and multi-point boundary value condition.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.739-744
• /
• 2013

In this paper, we propose a method of generating pitch commands for consistent initial trajectories irrelevant to flight conditions in the initial boosting phase of a thrust-vector-controlled vehicle. After shape assumption of the pitch command profile, parameters of the profile are determined in real time in order for the summit height of the trajectory to be a desired value by deriving the summit height considering thrust performance, gravity, and other flight conditions. Computer simulation results demonstrate good performance of the proposed method.

• 한국환경과학회지
• /
• 제30권8호
• /
• pp.613-619
• /
• 2021

Soil water enters the atmosphere via evapotranspiration, where it transforms into atmospheric water vapor and plays important role in the surface-atmosphere energy exchange. Soil conditions have a direct influence on the effective rainfall, and initial soil moisture conditions are important for quantitatively evaluating the effective rainfall in a watershed. To examine the sensitivity of the initial saturation to hydrologic outflow, a two-dimensional distributed FLO-2D hydrologic model was applied to a small watershed. The initial saturation was set to 0.3, 0.5, and 0.7 and the obtained results were compared. The Green-ampt model was chosen to calculate the penetration loss. Depending on the initial soil moisture, the peak flow rate varied by up to 60%, and the total water volume in the watershed by approximately 40%.

• 한국환경과학회지
• /
• 제7권1호
• /
• pp.96-103
• /
• 1998

To study the optimum conditions of composting with industrial wastewater sludge, the variations of temperature and $CO_2$ generation amount during the composting periods were investigated. The conditions were that industrial wastewater added to bulking agents such as sawdust and rice hull was used, and differently treated with microorganism seeding or not, initial C/N ratios, air flow rate and initial moisture contents, respectively. The results were summarized as follows : Seeding 5% of microorganism was higher the temperature than not seeding. And using sawdust as bulking agents, and adjusting 30~40 of Initial C/N ratio, 200ml/l.min. of k flow rate and 67~68% moisture contents were higher the temperature than any other conditions. Seeding 5% of microorganisms was higher $CO_2$ generation amount than not seeding. And that was much in the order of 7~40, 30~34 and 22~23 of initial C/N ratio. Judging from the results, it should be considered that the optimum conditions in the composting of industrial wastewater sludge were seeding of 5% microorganisms, and adjusting 30~34 of Initial C/N ratio, 200ml/l min. of air flow rate and 67~68% of Intitial moisture contents. The contents of inorganic matters and C/N ratio during the composting periods at optimum condition were a little Increased. and heavy metals contents after composting were lower than standard for fortllizer.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2002년도 춘계학술대회 및 임시총회
• /
• pp.272-275
• /
• 2002

In this paper, we find the controllability conditions for the following fuzzy differential systems (equation omitted) where A(t), B(t) are continuous matrices, g is given function, U(t) is fuzzy set and target X$^1$ is fuzzy set.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.255-257
• /
• 2012

Epoxy resin without any hardener can harden in the presence of hydroxide ions in cement mortars and concretes at ambient temperature. The purpose of present study is to examine the hardening properties of hardener-free epoxy-modified mortars by curing conditions. The hardener-free epoxy-modified mortars using diglycidyl ether of A epoxy resin are prepared with various polymer-cement ratios, and subjected to initial moist/dry curing, initial steam(90℃) curing, initial steam/heat(80℃, 100℃) curing.As a result, degree of hardening of epoxy resin in initial moist/dry cured, initial steam cured and initial steam/heat(80℃) cured hardener-free epoxy-modified mortars is decreased with increasing polymer-cement ratio. However, it is markedly improved with additional dry-curing periods. On the other hand, regardless of the polymer-cement ratio and dry curing periods, degree of hardening of hardener-free epoxy-modified mortars with initial steam/heat(100℃) cure is over 95%.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권2호
• /
• pp.97-106
• /
• 2015

Flexible structures are often important components of mechanical assemblies in motion. A flexible structure sometimes must go through assembly steps that cause it to be in a pre-stressed condition when in the starting position for operation. A virtual prototype of the assembly must also bring the model of the flexible structure into the same pre-stressed condition in order to obtain accurate simulation results. This case study is presented regarding the simulation of a constant velocity joint, with a focus on the flexible boot. The case study demonstrates that careful definition of the initial conditions of the boot and flexible body contacts yields high-fidelity simulation results.