• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.2025-2030
• /
• 2010

When $Cu^{2+}$ was used as an electron acceptor, removal of $Cu^{2+}$ was achieved from the synthesized wastewater (SW) in the cathode compartment of a microbial fuel cell (MFC). By addition of $KNO_3$, the different initial pH of the SW showed no effect on the removal efficiency of $Cu^{2+}$. For $Cu^{2+}$ concentration of 50 mg/L the removal efficiencies were found to be 99.82%, 99.95%, 99.58%, and 99.97% for the $KNO_3$ concentrations of 0, 50, 100 and 200 mM, and to be 99.4%, 99.9%, 99.7%, and 99.7% for pH values of 2, 3, 4, and 5, respectively. More than 99% $Cu^{2+}$ was removed for the $Cu^{2+}$ concentrations of 10, 50, and 100 mg/L, while only 60.1% of $Cu^{2+}$ was removed for the initial concentration of 200 mg/L (pH 3). The maximum power density was affected by both $KNO_3$ concentration and initial concentration of $Cu^{2+}$. It was increased by a factor of 1.5 (from 96.2 to 143.6 mW/$m^2$) when the $KNO_3$ concentration was increased from 0 to 200 mM (50 mg/L $Cu^{2+}$), and by a factor of 2.7 (from 118 to 319 mW/$m^2$) when $Cu^{2+}$ concentration was increased from 10 to 200 mg/L (pH 3).

• The Korean Journal of Ecology
• /
• v.17 no.4
• /
• pp.501-511
• /
• 1994

Dynamics of nutrients, non-polar, water solubles, acid solubles and acid insolubles (lignin) in decomposing litter were investigated for 2 years in the oak, Quercus acutissima, and the pitch pine, Pinus rigida, stands in the vicinity of Kongju, Chungnam Province. Nitrogen and phosphorus conetrations in decomposing litter increased with time elapsed, however, potassium decreased rapidly within three months and then remined constant with time elapsed. Calcium concentration in needle litter during experimental period was lower than that of initial concentration in needle litter during experimental period was lower than that of initial concentration, and showed no significant variation with time elapsed. Calcium concentration in oak litter during the experimental period, however, were higher than that of initial concentration. Magnesium concentration in oak litter decreased repidly during six months, and then remaines constant thereafter. Annual amount of nitrogen, phosphorus, potassium, calcium and magnesium which returned to soil via litter decomposition in the oak and the pitch pine stands was $3.3g/m^2$ and $0.9g/m^2$ for N, $0.03g/m^2$ and $0.01g/m^2$ for P, $1.3g/m^2$ and $0.7g/m^2$ for K, $0.7g/m^2$ and $1.2g/m^2$ for Ca, $0.9g/m^2$ and $0.4g/m^2$ for Mg, respectively. Non-polar, and water- and acid-soluble fractions in decomposing litter decreased and lignin increased with time.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.4
• /
• pp.295-298
• /
• 1996

Under glutamine-limited condition, $2\times10^6$ (viable cells/ml) of maximum cell density and 13.5 ($\mu g$/ml) of tissue-type Plasminogen Activators (tPA) production were maintained by spike feeding fresh medium in fed-batch cultivation of human recombinant melanoma cells. It showed that tPA production was much seriously affected than cell growth according to initial glutamine concentrations. Above 3.4 (mmol/I) of glutamine concentration both cell growth and tPA production were not much affected by increasing initial glutamine concentration. Glutamine depleted situation was occurred at latter periods of batch and fed-batch cultivations below 5.4 (mmole/I) of initial glutamine concentration. It also showed that maximum glutamine consumption and ammonia evolution rates were closely related to initial glutamine concentrations. Maximum specific tPA production rate was estimated as $8.1\times19^{-6}$ ($\mu g$/cells/h) at 3.4(mmol/I) of glutamine concentration, which is higher than that from other batch and fed-batch processes.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.10
• /
• pp.5-12
• /
• 2011

This study was focused on the reactivity of furnace slag against cadmium to design the vertical drain method with reactive column for improving contaminated sea shore sediment. The kinetic sorption test was performed by changing the initial concentration and pH. Using pseudo-second-order model, the reactivity of furnace slag was quantitatively analyzed. Equilibrium removal amount ($q_e$) of furnace slag increased and rate constant ($k_2$) decreased with the increase of initial cadmium concentration. With the increase of pH, the equilibrium removal amount ($q_e$) and rate constant ($k_2$) increased in the same initial concentration. Required retention time was related to the inverse of the product of the equilibrium removal amount ($q_e$) multiplied by rate constant ($k_2$). The required retention time could be used to design the length of reactive column.

• Journal of Korean Society on Water Environment
• /
• v.20 no.1
• /
• pp.86-92
• /
• 2004

Lab-scale experiments have been carried out to investigate ammonia stripping with a modified spray tower for removing ammonia nitrogen from swine wastewater. The operating conditions such as initial pH, temperature, air flow, hole size of distributor determining the diameter of water drops, and influent solids concentration were closely examined focusing on removal efficiency of ammonia. As a result of the experiment, in order to achieve high rate of ammonia removal by the air stripping system, the air flow rate must be supplied at high rate with sufficiently high initial pH, temperature. The optimum operating condition to meet the residual ammonia concentration of 300 mg/L was the initial pH of 11.0 at $35^{\circ}C$ with the air flow rate of 20 L/min. It also showed that the smaller hole size is, the higher removal rate of ammonia is expected. However, when used a small sized distributor (2 mm), the flooding problem at the upper column occurred due to clogging of the hole. With regard to the influent solids concentration, it was showed that the lower concentration of solids, the higher removal rate of ammonia. The removal of particulate materials in influent led to improve the removal efficiency of ammonia, rather than to control the operating condition including initial pH, temperature, and air flow. The empirical correlation between KLa and operating parameters would be driven as, $K_{La}=(0.0003T-0.0047){\cdot}G^{0.3926}{\cdot}L^{-0.5169}{\cdot}C^{-0. 1849}$. The calculated $K_{La}$ from proposed formula can be used effectively to estimate the optimum reaction time and to calculate the volume of modified spray tower system.

• Advances in environmental research
• /
• v.6 no.3
• /
• pp.173-187
• /
• 2017

Heavy metals, such as vanadium, are some of the most toxic types of water contaminants. In this study, vanadium was removed using a new composite adsorbent called BAZLSC. The impacts of pH and initial concentration of vanadium(V) on the elimination effectiveness of this metal by using BAZLSC were investigated in the first step of the study. Vanadium removal increased as pH increased to 3-3.5, and initial concentration increased to 60-70 mg/L. The removal efficiency then decreased. Central composite design and response surface methodology were employed to examine experimental data. Initial concentration of V ($mg.L^{-1}$), pH, and dosage of adsorbent (g/L) were the independent factors. Based on RSM, the removal effectiveness of vanadium was 86.36% at the optimum of initial concentration (52.69 mg/L), pH (3.49), and adsorbent dosage (1.71 g/L). Also adsorption isotherm investigations displayed that the Freundlich isotherm could explain vanadium adsorption by BAZLSC better than the Langmuir isotherm. Beside them, desorption studies showed sorption was slightly diminished after six continuous cycles.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.325-328
• /
• 2002

Production of human granulocyte-macrophage colony stimulating factor (hGM-CSF) by Nicotiana tabacum cell suspension culture was studied in Murashige and Skoog (MS) medium with sucrose as a carbon source, ammonium nitrate and potassium nitrate as nitrogen sources, potassium dihydrogen phosphate and sodium dihydrogen phosphate hydrate as phosphate sources, respectively. Optimum concentrations for carbon, nitrogen, phosphate was determined to enhance the production of hGM-CSF. Cell growth was better at high initial sucrose concentration (60 g/L), high initial nitrogen concentration (121.04 mM). Maximum cell density (18.28 g/L) was obtained at 60 g/L of sucrose after 14 days. Cell growth was not so good at low initial sucrose concentration 00 g/L), but the highest hGM-CSF production was obtained at the latter half of exponential phase. hGM-CSF production increased about 3 fold at initial phosphate concentration of 4.96 nM

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.69-72
• /
• 2000

After 300hours cultivation Chlorella vulgaris in standard medium in which the initial cell seeding concentration of $0.7{\times}10^4ells/mL$, $1.21{\times}10^5ells/mL$ was gained but in the case of 0.30g/L of initial cell seeding concentration the maximum growth rate of $0.162g/L\;{\cdot}\;day$ was shown. In the case of the initial glucose concentration of 2.00g/L, the cell concentration was changed from initial 0.025g cells/L to 0.874g cells/L after 140hours cultivation, the specific growth rate was $0.243h^{-1}$, but 268mL of gases were formed in 72hours, and after that, hydrogen evolution was completed. Formed gases were not all hydrogen, and 19.87 mol% of hydrogen is detected by GC. Analyzing the composition of Chlorella vulgaris by elementary analysis, it is found to be $C_{1.000}\;H_{1.774}\;N_{0.125}\;O_{0.557}$, and $CO_2$ conversion rate by Chlorella vulgaris was $0.616\;cells/g\;{\cdot}\;CO_2$

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.2
• /
• pp.19-26
• /
• 2000

This paper presents the effects of initial pressure of mixture on CO, $CO_2$ and NOx emissions in constant volume combustion chamber. The CO, $CO_2,O_2,N_2$ concentrations in the chamber are determined by thermal conductivity detection (Gas-chromatograph) wile the NOx concentration is measured by chemiluminescent detection (NOx Analyser). Methane-air mixture is used as premixed fuel and the measurements are taken with equivalence ratios($\phi$) varing from 0.6 to 1.3, and initial pressures of methane-air mixture varing from 0.1MPa to 0.8MPa in constant volume combustion chamber. The NOx concentration steadily increases with increasing equivalence ratio, peaks in lean flame ($\phi$=0.85~0.9), and then rapidly decreases. However, as the initial pressure of mixture is increased, the equivalence ratio corresponding to the point of peak [NOx] shifts towards leaner conditions. This is caused by a similar shift in the peak [CH], which is caused by the variation with pressure and equivalence ratio of the rate of CH production from $CH_2$ and OH. The maximum combustion pressure peaks at $\phi$ =1.05 and the $CO_2$ concentration peaks at $\phi$=0.95~1.0 while the CO concentration rises sharply at the condition of fuel-rich mixtures. This is caused by complete combustion at $\phi$=0.95.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.307-307
• /
• 2012

In this study, we investigated that the resistance switching characteristics of Al-doped MgOx films with increasing Al doping concentration and increasing film thickness. The Al-doped MgOx based ReRAM devices with a TiN/Al-doped MgOx/Pt/Ti/SiO2 were fabricated on Si substrates. The 5 nm, 10 nm, and 15 nm thick Al-doped MgOx films were deposited by reactive dc magnetron co-sputtering at $300^{\circ}C$ and oxygen partial ratio of 60% (Ar: 16 sccm, O2: 24 sccm). Micro-structure of Al-doped MgOx films and atomic concentration were investigated by XRD and XPS, respectively. The Al-doped MgOx films showed set/reset resistance switching behavior at various Al doping concentrations. The process voltage of forming/set is decreased and whereas the initial current level is increased with decreasing thickness of Al-doped MgOx films. Besides, the initial current of Al-doped MgOx films is increased with increasing Al doping concentration in MgOx films. The change of resistance switching behavior depending on doping concentration was discussed in terms of concentration of non-lattice oxygen of Al-doped MgOx.