• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.168-177
• /
• 1998

The effects of the regeneration parameters such as inlet gas temperature, space velocity, oxygen concentration of the exhaust gas, and initial particulate loading on the oxidation of the particulate inside ceramic cordierite filter have been investigated through an engine experiment. As the inlet gas temperature increases, the remarkable filter temperature occurs owing to the rapid combustion rate. Though the higher space velocity affirms the safe regeneration, it also requires much fuel consumption of the burner. For that reason, the space velocity should be compromised considering the fuel economy. The excessive accumulation of the particulate may cause undesirable regeneration temperatures inside filer even under the optimized regeneration condition. The inlet gas temperature should be selected to overcome the variation of the oxygen concentration which is inherent feature of the diesel engine. It is the most important factor in the regeneration control techniques.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.604-609
• /
• 2005

This paper presents an experimental study for optimizing the acceleration of AC servomotor using finite jerk (the first derivative of acceleration). The acceleration optimization with finite jerk aims at generating the smooth velocity profile of AC servomotor by experimentally minimizing vibration resulted from the initial friction of servomotor. The stick-slip motion of AC servomotor induced by initial friction can result in the positional errors that are not good for high-precision devices such as the assembly robot arms to be used in a 300mm wafer or a LCD (Liquid Crystal Display) stocker system. In this paper, experiments were made by using a PM (Permanent Magnet) type AC servomotor with MMC(R) (Multi Motion Controller) programmed in Visual C++(R). The experiments have been performed for finding the optimal duration time of finite jerk in terms of the minimization of vibration displacements when both the magnitude of velocity and the allowable acceleration are given. We have compared the proposed control with the conventional control with trapezoidal velocity profile by measuring vibration displacements. The effectiveness of the proposed control has been verified in that the experimental results showed the decrease of vibration displacement by about 24%.

• 한국군사과학기술학회지
• /
• 제14권4호
• /
• pp.615-621
• /
• 2011

In this paper, the proper quantity of conditioning rounds has been studied using the statistical analysis on the basis of the acceptance test data of K676 and K677 propelling charge for K9 self propelled howitzer. In general, the muzzle velocity of the initial rounds tends to be a little lower than that of the succeeding rounds. The latter rounds are likely to have the constant velocities after firing the appropriate conditioning rounds. The main cause of velocity difference was proved to be the proper quantity of conditioning rounds by doing the correlation analysis among the initial tube temperature, the tube life and the quantity of conditioning rounds. The result of paired t-test shows that two rounds of conditioning projectiles are proved to be enough to maintain the constant velocity in the case of the acceptance test of K676 and K677 propelling charge.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.166-173
• /
• 2007

A numerical study was conducted to have the effect of $CO_2$ addition to fuel on the chemical reaction mechanism with the change of the initial concentration of $CO_2$ and the axial velocity gradient. From this study, it was found that there were two serious effects of $CO_2$ addition on a non-premixed flame ; a diluent effect by the reactive species reduction and chemical effect of the breakdown of $CO_2$ by the third-body collision and thermal dissociation. Especially, the chemical effect was serious at the lower velocity gradient of the axial flow. It was certain that the mole fraction profile of $CO_2$ was deflected and CO was increased with the initial concentration of $CO_2$. It was also ascertained that the breakdown of $CO_2$ would cause the increasing of CO mole fraction at the reaction region. It was also found that the addition of $CO_2$ did not alter the basic skeleton of $H_2-O_2$ reaction mechanism, but contributed to the formation and destruction of hydrocarbon products such as HCO. The conversion of CO was also suppressed and $CO_2$ played a role of a dilution in the reaction zone at the higher axial velocity gradient.

• 한국수자원학회논문집
• /
• 제40권9호
• /
• pp.723-734
• /
• 2007

본 연구는 점착성 퇴적물 예측에 가장 중요한 인자인 침강속도를 강 항만 저수지 그리고 호수에 녹아있는 이온 $(Na^+,\;Cl^-,\;OH^-,\;H^+)$의 첨가 및 밀도의 변화 아래 실시되었다. 정수 중에 부유된 미립자(alumina와 quartz)의 침강 속도는 압력센서(최대 10 mbar)로 측정되었다. 초기 농도 20 g/l에서 alumina와 quartz의 평균 침강속도는 미립자의 응집현상 때문에 최고 값을 보였으며, 이때 각각 최대 평균 침강속도는 0.185 mm/s(alumina)와 0.022 mm/s(quartz)이다. 그 후 증가된 초기농도일 경우 간섭침강 때문에 침강속도는 감소하였다. 또한 증가된 염분에서 두 미립자의 평균속도는 증가하였다. 더구나 alumina의 평균 침강속도는 산성에서 감소하다가 알칼리성에서는 강한 응집현상 때문에 높게 측정되었다. 그러나 quartz의 평균 침강속도는 알칼리성에서 낮은 값을 보였다.

• 한국소음진동공학회논문집
• /
• 제13권3호
• /
• pp.202-209
• /
• 2003

A simply supported beam subjected to a uniformly distributed tangential follower force and the two successively moving spring-mass systems upon it constitute this vibration system. The influences of the velocities of the moving spring-mass system, the distance between two successively moving spring-mass systems and the uniformly distributed tangential follower force have been studied on the dynamic behavior of a simply supported beam by numerical method. The uniformly distributed tangential follower force is considered within its critical value of a simply supported beam without two successively moving spring-mass systems, and three kinds of constant velocities and constant initial displacement of two successively moving spring-mass systems are also chosen. Their coupling effects on the transverse vibration of the simply supported beam are inspected too. In this study the simply supported beam is deflected with small vibration proportional to natural frequency of the moving spring-mass systems. According to the increasing of initial displacement of the moving spring-mass systems the amplitude of the small vibration of the simply supported beam is increased due to the spring force. The velocity of the moving spring-mass system more affect on the transverse deflection of simply supported beam than other factors of the system and the effect is dominant at high velocity of the moving spring-mass systems.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.299-306
• /
• 2006

Using a level set method and topological derivatives, a topological shape optimization method that is independent of an initial design is developed for linearly elastic structures. In the level set method, the initial domain is kept fixed and its boundary is represented by an implicit moving boundary embedded in the level set function, which facilitates to handle complicated topological shape changes. The 'Hamilton-Jacobi (H-J)' equation and computationally robust numerical technique of 'up-wind scheme' lead the initial implicit boundary to an optimal one according to the normal velocity field while minimizing the objective function of compliance and satisfying the constraint of allowable volume. Based on the asymptotic regularization concept, the topological derivative is considered as the limit of shape derivative as the radius of hole approaches to zero. The required velocity field to update the H -J equation is determined from the descent direction of Lagrangian derived from optimality conditions. It turns out that the initial holes is not required to get the optimal result since the developed method can create holes whenever and wherever necessary using indicators obtained from the topological derivatives. It is demonstrated that the proper choice of control parameters for nucleation is crucial for efficient optimization process.

• 한국시뮬레이션학회논문지
• /
• 제10권1호
• /
• pp.63-65
• /
• 2001

To investigate the natural frequencies of curved piping systems with various elbow angles conveying flow fluid, a simulation is performed considering Initial tension due to the inside fluid. The system is analyzed by finite element method utilizing straight beam element. Elbow part is meshed using 4 elements, and the initial tension is considered by inserting equivalent terms into the stiffness matrix. Without considering the initial tension, the system becomes unstable, that is, the fundamental natural frequency approaches to zero value fast, as the flow velocity reaches critical value. With the initial tension terms, the system becomes stable where there is no abrupt decrease of the fundamental natural frequency. The change rate of the natural frequency with respect to the flow velocity reduces. As elbow angle increases, the system becomes stiffer, then around 150 degrees of the elbow angle the natural frequency has the largest value, the value decreases after the angle of the largest natural frequency. When angle is between 170 degrees and 179 degrees, the natural frequency is very sensitive. This means that small change of angle results in great change of natural frequency, which is expected to be utilized in the control of the natural frequency of the piping system conveying flow fluid.

• 제어로봇시스템학회논문지
• /
• 제20권4호
• /
• pp.468-473
• /
• 2014

This paper describes the in-flight alignment of SDINS (Strapdown Inertial Navigation Systems) using an EKF (Extended Kalman Filter) and a UKF (Unscented Kalam Filter), which allow large initial attitude error uncertainty. Regardless of the inertial sensors, there are nonlinear error dynamics of SDINS in cases of large initial attitude errors. A UKF that is one of the nonlinear filtering approaches for IFA (In-Flight Alignment) are used to estimate the attitude errors. Even though the EKF linearized model makes velocity errors when predicting incorrectly in case of large attitude errors, a UKF can represent correctly the velocity errors variations of attitude errors with nonlinear attitude error components. Simulation results and analyses show that a UKF works well to handle large initial attitude errors of SDINS and the alignment error attitude estimation performance are quite improved.

• 한국정보통신학회논문지
• /
• 제21권4호
• /
• pp.688-697
• /
• 2017

비선형 시스템의 이동 로봇을 원하는 목표점으로 속도, 가속도 그리고 각속도 관련 에너지를 최소한으로 사용하여 최단시간 안에 이동시키는 최적의 제어 문제를 수학적으로 푸는 것이 매우 어렵다. 본 논문에서는 유전알고리즘을 이용하여 이동 로봇의 속도, 각속도 관련 에너지를 최소화하면서 최단시간 안에 이동할 수 있는 최적제어이득을 구한다. 이동 로봇은 비선형시스템이므로 초기위치에 따라 최적제어이득이 다르게 결정된다. 따라서 초기위치 분할 점들을 설정하고 각 분할 점에서 유전알고리즘을 이용하여 최적제어이득을 구한다. 각 분할 점에서 구한 최적제어 이득으로 신경회로망을 학습시켜서 임의의 초기위치에 대한 제어이득을 구할 수 있다. 마지막으로 본 연구의 유용성을 컴퓨터 시뮬레이션 연구로 확인한다.