• Journal of Biosystems Engineering
• /
• v.25 no.4
• /
• pp.265-272
• /
• 2000

Feasibility of the self-TMR mixing/feeding system for dairy farm in Korea was analyzed by comparing with a traditional feeding system. The total operating cost of self-TMR feeding system decreased with an increase of farm size. However, the cost was higher than that of traditional feeding system because of its high purchasing cost of TMR mixer as an initial investment. Profit per unit input of the TMR feeding system became greater over the traditional system when the farm size is larger than 17 heads due to more and better milk production. The profitable discrepancy became bigger as dairy farm size increases.

• Journal of Power System Engineering
• /
• v.22 no.6
• /
• pp.28-35
• /
• 2018

The large-eddy simulation (LES) was carried out to evaluate the instantaneous vector and vorticity profiles of a small-size axial fan (SSAF) at the operating point of full-flowrate. The downstream flow of the SSAF exhibits a shorter axial flow when not fully developed, especially the stronger vortex appears at the edge near the flow end. On the other hand, the downstream flow of the SSAF exhibits a longer axial flow, and the weaker vortex appears at the edge near the flow end when the flow is sufficiently developed. Moreover, in the downstream of the SSAF, a periodic and intermittent flow pattern appears at the edge showing the axial flow, and the instantaneous vorticity contour lines showing the form of a circle group are distributed at specific intervals from the downstream region of the blade tip, which is considered to be the result of the intermittency phenomenon influenced by the number of blades and the number of revolutions.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.189-194
• /
• 2024

This paper presents a radiation-hardened-by-design preamplifier that utilizes a self-compensation technique with a charge-sensitive amplifier (CSA) and replica for total ionizing dose (TID) effects. The CSA consists of an operational amplifier (OPAMP) with a 6-bit binary weighted current source (BWCS) and feedback network. The replica circuit is utilized to compensate for the TID effects of the CSA. Two comparators can detect the operating point of the replica OPAMP and generate appropriate signals to control the switches of the BWCS. The proposed preamplifier was fabricated using a general-purpose complementary metal-oxide-silicon field effect transistor 0.18 ㎛ process and verified through a test up to 230 kGy (SiO₂) at a rate of 10.46 kGy (SiO₂)/h. The code of the BWCS control circuit varied with the total radiation dose. During the verification test, the initial value of the digital code was 39, and a final value of 30 was observed. Furthermore, the preamplifier output exhibited a maximum variation error of 2.39%, while the maximum rise-time error was 1.96%. A minimum signal-to-noise ratio of 49.64 dB was measured.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.4
• /
• pp.395-402
• /
• 2016

When the operation of battery is converted at charging and discharging system based on a DC micro grid, the voltage is fluctuated. And excessive voltage fluctuation could cause damage or failure of charging and discharging equipment. Therefore, in this paper, we studied the operating schedule of the charging and discharging system based on the DC micro grid and a design point of the capacitor which was able to reduce the voltage fluctuation. A result of computer simulation showed that when a fluctuation-reducing capacitor which had an initial value of 600V/35mF was applied at the charging and discharging system based on a DC micro grid which was operated with three charging battery sets and five discharging battery sets, voltage fluctuation by charging and discharging operation was reduced by about 63.3%. Furthermore, voltage fluctuation which occurred when initial network voltage was stabilized was reduced by about 73%.

• Membrane Journal
• /
• v.8 no.1
• /
• pp.42-49
• /
• 1998

Effects of operating time, pH, temperature, concentration and addition of proteolytic enzyme on permeate flux for the ultrafiltration of gelatin and bovine serum albumin(BSA) solutions were studied. The results showed that permeate flux of gelatin solution was maintained almost constant during the operating time, and that of BSA solution was decreased to 66% of the initial value after 40 min operation. The permeate flux of gelatin solution was increased by increasing temperature. The permeate flux of BSA solution was constant in the temperature range of 30~$50{\circ}C$, but increased at $60{\circ}C.$. The permeate fluxes of gelatin and BSA solution showed minimum values near the isoelectric point of pH 5.0. The permeate fluxes of 1%(w/v) and 6% gelatin solution were $43.0l/m^2\cdot hr$ and $13.5l/m^2\cdot hr$, respectively. Those of 1% and 4% BSA solution were $33.0l/m^2\cdot hr$ and $14.0l/m^2\cdot hr$, respectively. The permeate fluxes of gelatin and BSA solutions were decreased to 68.6% and 57.6% of their initial values by increasing their concentration, respectively. The permeate fluxes of gelatin and BSA solutions were enhanced by 30% with the addition of proteolytic enzyme.

• Journal of the Society of Disaster Information
• /
• v.18 no.2
• /
• pp.280-289
• /
• 2022

Purpose: In this study, the characteristics of fire occurrence according to ignition heat sources such as operating equipment, cigarette/lighter fire, and flame/fire were analyzed. Method: One-way ANOVA and cross-analysis were used to analyze the characteristics of fire occurrence by verifying the difference between the ignition environment, fire damage status and scale, and cause of ignition according to the ignition heat source. Result: The fire occurrence characteristics were analyzed through As a result of the analysis, it was found that fires caused by operating devices occurred more frequently on weekdays than other ignition heat sources, and the number of victims and the number of victims were the highest, so mobilization of firefighting power and property damage were the greatest. The initial ignition was generated by electric and electronic devices, and the combustion was expanded by the synthetic resin. For fires caused by cigarette and lighter fires, the most fires occurred on Saturdays and Sundays, and the mobilization of the police force was more characteristic than the mobilization of the firefighting force. In particular, it was found that the initial ignition and combustion expansion were caused by paper, wood, and hay. Fires caused by sparks and sparks occurred most frequently on Saturdays and Sundays, and initial ignition and combustion expansion were found to be caused by paper, wood, and hay. In particular, it showed the characteristic that it occurred in the place farthest from the fire station. The common characteristic of all ignition heat sources was that the fire occurred most frequently in the afternoon time, and the fire type was predominantly the building structure fire, and only the ignition point was burned the most. Conclusion: In order to prevent fire and minimize damage, it is necessary to analyze the tendency of fire occurrence and to prepare appropriate preparations according to the fire occurrence factors. In order to analyze the characteristics of fire occurrence using public data in the future, it is necessary to standardize disaster data and to open and activate data.

• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.79-83
• /
• 2015

The fire accident is a representative type of disaster that can largely impact on business. Therefore, precautionary measures and rapid initial response is very important when a disaster occurs. The storage of porous combustibles is inevitable in coal yard, plywood processing industry, and others that are currently operating. Initial fire fighting of fire and identifying the ignition point in such a porous combustible storage space are so difficult that if the initial response is failed, being led to deep-seated fire, surface fire is likely to result in secondary damage. In addition, deep-seated fire can cause personal injuries and property damage due to a large amount of toxic gases and reignition. Therefore damage reduction measures is required around the storage space to handle a porous flammable. Improving the penetration performance of the concentration of the surfactant is carried out as underlying study, which is about an deep-seated fire extinguishing efficiency augmentation when using wetting agents. The porous materials used in the experiments is radiata pine wood flour, which occupies more than 75% of the domestic wood market. Fire fighting water is selected as Butyl Di Glycol (BDG), which is being used for infiltration extinguishing agent, and the experiment was carried out by producing a standard solution. The experiment was carried out on the basis of the Deep-Seated Fire Test of NFPA 18. The amount of watering, porous material to the internal amount of penetration, and runoff measurement out of the porous material was conducted. According to experimental results, as the surface tension is reduced, the surfactant concentration macroscopic penetration rate decreases, but infiltration to a porous material is shown to have growth characteristics.

• Journal of Trauma and Injury
• /
• v.25 no.4
• /
• pp.139-144
• /
• 2012

Purpose: Hypovolemic shock is the leading cause of death in multiple trauma patients with pelvic bone fracures. The purpose of this study was to develop a simple prediction method for injury severity and amount of hemorrhage via an analysis of the correlation between the site of pelvic bone fracture and the amount of transfusion and to verify the usefulness of the such a simple scoring system. Methods: We analyzed retrospectively the medical records and radiologic examination of 102 patients who had been diagnosed as having a pelvic bone fracture and who had visited the Emergency Department between January 2007 and December 2011. Fracture sites in the pelvis were confirmed and re-classified anatomically as pubis, ilium or sacrum. A multiple linear regression analysis was performed on the amount of transfusion, and a simplified scoring system was developed. The predictive value of the amount of transfusion for the scoring system as verified by using the receiver operating characteristics (ROC). The area under the curve of the ROC was compared with the injury severity score (ISS). Results: From among the 102 patients, 97 patients (M:F=68:29, mean $age=46.7{\pm}16.6years$) were enrolled for analysis. The average ISS of the patients was $16.2{\pm}7.9$, and the average amount of packed RBC transfusion for 24 hr was $3.9{\pm}4.6units$. The regression equation resulting from the multiple linear regression analysis was 'packed RBC units=1.40${\times}$(sacrum fracture)+1.72${\times}$(pubis fracture)+1.67${\times}$(ilium fracture)+0.36' and was found to be suitable (p=0.005). We simplified the regression equation to 'Pelvic Bleeding Score=sacrum+pubis+ilium.' Each fractured site was scored as 0(no fracture) point, 1(right or left) point, or 2(both) points. Sacrum had only 0 or 1 point. The score ranged from 0 to 5. The area under the curve (AUC) of the ROC was 0.718 (95% CI: 0.588-0.848, p=0.009). For an upper Pelvis Bleeding Score of 3 points, the sensitivity of the prediction for a massive transfusion was 71.4%, and the specificity was 69.9%. Conclusion: We developed a simplified scoring system for the anatomical fracture sites in the pelvis to predict the requirement for a transfusion (Pelvis Bleeding Score (PBS)). The PBS, compared with the ISS, is considered a useful predictor of the need for a transfusion during initial management.

• Journal of Family Resource Management and Policy Review
• /
• v.16 no.2
• /
• pp.187-210
• /
• 2012

Pumasi and Cooperative Child Care Sharing have had positive results among participants and show possibilities of spreading out to the community in general. However, performance was not proved where it is clarified, and the experience of 23 local Healthy Family Support Centers have that ran the demonstration project were unable to be collected. It is the point of time when the initial backing up is important but the centers do not have the systematic support. Therefore, this research presents an effective management plan through qualitative research involving Pumasi participants and person in charge. The operation strategies by the stage of the project were as follows: First, in the beginning stage, the person in charge establishes the target and vision of the project. Second, when comprising the Pumasi team, it was necessary to consider their characteristics according to the team organization subjects. Third, it is necessary to extend the turn-off time and provide many programs so that the various populations can participate. Fourth, in the advertising step, word of mouth and individual contact needs to be utilized. Fifth, in a medium or small city or an urban-rural complex area, the person in charge should support the participants' Pumasi activities. Sixth, various programs such as a passive and active parent education program and Pumasi education program for the leader needs to be provided for the activation of Pumasi activities. Lastly, a cooperative child care sharing location needs to be constructed by the duality system of the base space and outer space. In this location, the inside play space for the children is essential.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.9
• /
• pp.4033-4037
• /
• 2014

Emerging evidence has shown associations of microRNA-205 (miR-205) with crucial cell processes such as the epithelial-mesenchymal transition (EMT) and aberrant expression with tumorigenesis in many types of human malignancy. This prospective study characterized the contribution of miR-205 to the colorectal cancer (CRC) tumorigenesis. The real-time reverse transcription-polymerase chain reaction was used to examine miR-205 levels prospectively in 36 pairs of samples of CRC tissue and adjacent noncancerous tissue (>2 cm from cancer tissue). In addition, the relationship between miR-205 levels and clinicopathological features was explored. The capability of miR-205 to function as a tumor marker was also examined. miR-205 expression levels did not show significant changes overall. However, miR-205 was significantly downregulated in a group of CRC samples compared with matched noncancerous tissue samples. Moreover, decreased miR-205 correlated significantly with lymphatic metastasis. A receiver operating characteristic (ROC) curve also showed an optimum cut off point of $1.4{\times}10^{-3}$ to distinguish lymphatic metastatic CRCs from non-metastatic CRCs. Interestingly we found lymphatic metastasis in almost 80% of the depressed samples. This study suggested that miR-205 could be reduced in the majority of metastatic CRCs and the risk of CRC metastasis may be predicted by monitoring miR-205 in patient samples collected at the time of the initial diagnosis. Therefore, targeting miR-205 and its potential environmental activators might be a promising therapeutic option to prevent malignant progression toward metastasis.