• Asian-Australasian Journal of Animal Sciences
• /
• 제28권3호
• /
• pp.435-441
• /
• 2015

Relationships among different stress parameters (lairage time and blood level of lactate and cortisol), meat quality parameters (initial and ultimate pH value, temperature, drip loss, sensory and instrumental colour, marbling) and carcass quality parameters (degree of rigor mortis and skin damages, hot carcass weight, carcass fat thickness, meatiness) were determined in pigs (n = 100) using Pearson correlations. After longer lairage, blood lactate (p<0.05) and degree of injuries (p<0.001) increased, meat became darker (p<0.001), while drip loss decreased (p<0.05). Higher lactate was associated with lower initial pH value (p<0.01), higher temperature (p<0.001) and skin blemishes score (p<0.05) and more developed rigor mortis (p<0.05), suggesting that lactate could be a predictor of both meat quality and the level of preslaughter stress. Cortisol affected carcass quality, so higher levels of cortisol were associated with increased hot carcass weight, carcass fat thickness on the back and at the sacrum and marbling, but also with decreased meatiness. The most important meat quality parameters (pH and temperature after 60 minutes) deteriorated when blood lactate concentration was above 12 mmol/L.

• The Journal of the Korean dental association
• /
• 제53권11호
• /
• pp.804-816
• /
• 2015

PURPOSE: The aim of this study was to evaluate the influence of the oxide layer removal process in the Co-Cr-Mo (CCM) abutment after casting procedure on the prosthesis settlement and screw stability. MATERIALS AND METHODS: CCM abutments of four different interface conditions (CCM-M; machined, CCM-O; oxide layer formed, CCM-B; blasted, CCM-P; polished after blasted) and gold abutment (Gold-C; Cast with type III Gold alloy) were used. The initial settling values of abutments were evaluated according to the difference of implant-abutment length when the tightening torques were applied at 5 Ncm and 30 Ncm, and the settling values of abutments caused by loading were evaluated according to the difference of implant-abutment length before and after loading with 250 N, 100000 cycle. The loss ratios of removal torque for abutment screws were evaluated according to the difference in value of removal torques under 30 Ncm tightening torque applied before and after cyclic loading. RESULTS: The CCM-P and CCM-B group showed a higher initial settling value compared with the Gold-C group (P<.05), while the Gold-C group showed the highest settling values caused by loading (P<.05) and no significant differences were observed for between CCM groups (P>.05). The loss ratio of removal torque values for the CCM-B, CCM-P groups did not differ significantly from that of the Gold-C group (P>.05). CONCLUSION: Even though the oxide layer was removed by different methods, CCM abutment with internal conical connection structure showed lower abutment settling and similar screw loosening after cyclic loading compared with gold abutment.

• Journal of Sensor Science and Technology
• /
• 제28권3호
• /
• pp.198-204
• /
• 2019

In this study, we propose a wearable force sensor using 3D printed mold and liquid metal. Liquid metal, such as Galinstan, is one of the promising functional materials in stretchable electronics known for its intrinsic mechanical and electronic properties. The proposed soft force sensor measures the external force by the resistance change caused by the cross-sectional area change. Fused deposition modeling-based 3D printing is a simple and cost-effective fabrication of resilient elastomers using liquid metal. Using a 3D printed microchannel mold, 3D multichannel Galinstan microchannels were fabricated with a serpentine structure for signal stability because it is important to maintain the sensitivity of the sensor even in various mechanical deformations. We performed various electro-mechanical tests for performance characterization and verified the signal stability while stretching and bending. The proposed sensor exhibited good signal stability under 100% longitudinal strain, and the resistance change ranged within 5% of the initial value. We attached the proposed sensor on the finger joint and evaluated the signal change during various finger movements and the application of external forces.

• Clinics in Shoulder and Elbow
• /
• 제26권4호
• /
• pp.373-379
• /
• 2023

Background: The purpose of this study was to determine the association between smoking and clinical outcomes of hook plate fixation for acute acromioclavicular (AC) joint injuries. Methods: This study retrospectively investigated 82 patients who underwent hook plate fixation for acute AC joint dislocation between March 2014 to June 2022. The patients were grouped by smoking status, with 49 in group N (nonsmokers) and 33 in group S (smokers). Functional scores and active range of motion were compared among the groups at the 1-year follow-up. Coracoclavicular distance (CCD) was measured, and difference with the uninjured side was compared at initial injury and 6 months after implant removal. Results: No significant differences were observed between the two groups in demographic factors such as age and sex, as well as parameters related to initial injury status, which included time from injury to surgery, the preoperative CCD difference value, and the Rockwood classification. However, the postoperative CCD difference was significantly higher in group S (3.1±2.6 mm) compared to group N (1.7±2.4 mm). Multivariate regression analysis indicated that smoking and the preoperative CCD difference independently contributed to an increase in the postoperative CCD difference. Despite the radiographic differences, the postoperative clinical outcome scores and active range of motion measurements were comparable between the groups. Conclusions: Smoking had a detrimental impact on ligament healing after hook plate fixation for acute AC joint dislocations. This finding emphasizes the importance of smoking cessation to optimize reduction maintenance after AC joint injury. Level of evidence: III.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권8호
• /
• pp.1251-1257
• /
• 1999

Two experiments were conducted to determine the effects of roasting and extrusion on nutritional value of conventional and low-inhibitor soy beans for nurser-age pigs. In Exp. 1, 100 weaning pigs (7.5 kg average initial BW) were used in a 35-d growth assay to determine the effects of processing method (roasting in a Rast-A-Tron$^{TM}$ raster vs extrusion in an Insta-Pro$^{TM}$ extruder) on the nutritional value of Williams 82 soybeans with (+K) and without (-K) gene expression for the Kunitz trypsin inhibitor. Treatments were 48% soybean meal with added soybean oil, +K roasted, +K extruded, -K roasted and -K extruded. All diets were formulated to contain 3.5 Mcal DE/kg, with 0.92% lysine for d 0 to 14 and 0.76% lysine for d 14 to 35 of the experiment. The lysine concentrations were 80% of NRC (1988) recommendations to accentuate difference in response to protein quality and lysine availability. For d 0 to 14, pigs fed extruded soybeans (+K and -K) had greater ADG (p<0.001), ADFI (p<0.09) and gain/feed (p<0.01) than pigs fed roasted soybeans. For d 14 to 35 and overall, the same effects were noted, i.e., pigs fed extruded soybeans had greater ADG, ADFI and gain/feed than pigs fed roasted soybeans (p<0.03). Also, pigs fed -K soybeans were more efficient (p<0.008) than pigs fed +K soybeans. In Exp. 2, 150 weanling pigs (7.0 kg average initial BW) were used in a 35-d growth assay. All diets were formulated to contain 3.5 Mcal DE/kg, with 1.25% lysine for d 0 to 14 and 1.10% lysine for d 14 to 35 of the experiment. The lysine concentrations were formulated to be in excess of NRC recommendation to determine if differences in nutritional value of the soybean preparations could be detected in protein-adequate diets. For d 0 to 14 (p<0.06), 14 to 35 (p<0.03) and 0 to 35 (p<0.02), pigs fed extruded soybeans had greater ADG and gain/feed than pigs fed roasted soybeans. Apparent digestibilities of DM, N and GE were greater for diets with extruded soybeans than diets with roasted soybeans and diets with soybean meal and soybean oil were intermediate. The response to extrusion processing was greater with -K than +K soybeans, with pigs fed extruded -K soybeans having the greatest growth performance and nutrient digestibilities and lowest skin-fold thickness of any treatment. In conclusion, extrusion yielded a full-fat soy product of greater nutritional value than roasting. Also, selection against genetic expression of the Kunitz trypsin inhibitor improved nutritional value of the resulting soybean preparations.

• Journal of Forest and Environmental Science
• /
• 제35권4호
• /
• pp.223-231
• /
• 2019

Castanopsis indica (Sil Batna) is an ecologically valuable multipurpose indigenous tree species of Bangladesh. Considering its high value but poor natural regeneration due to seed dormancy, the authors conducted an experiment at the Institute of Forestry and Environmental Sciences Chittagong University (IFESCU) during 2012-2013 to find out effective pre-sowing treatments. Ten pre-sowing seed treatments were applied on mature, even-sized seeds namely-control; sandpaper rubbing; nail clipping; immersion in normal water (at room temperature: 24℃) for 24 hrs., 48 hrs. and 72 hrs.; immersion in hot water (80℃) for 1 minute; soaking in 10% dilute H₂SO₄; soaking in 10% HCl for 5 minutes; and sowing in propagator house. Seeds sown after sandpaper rubbing at the distal end revealed best performances by providing highest germination percent (66.7%), germination energy (30%), germination index (0.17), germination rate (0.0145), germination value (30%) and plant percent (66.7%) within shortest period (38 days). The treatment also produced most vigor seedlings with 20.9 cm shoot height, 15 node number, and largest leaves (11.1 cm×2.9 cm). Hence, it is recommended to adopt sandpaper rubbing method for maximum germination and quality seedlings.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제17권1호
• /
• pp.19-28
• /
• 1981

Accuracy of the position fix obtained by navigation with Omega in the capacity of worldwide navigation depends on the predicted propagation correction. The authors observe continuously the phase differences of the A-C pair and the A-E pair from April 17 to October 14, 1980, at Busan(35\ulcorner07'. 9N, 129\ulcorner06'. 3E), and analyze the characteristic of daily variation the relation between the theoretical PPC and the measu red PPC to study the accuracy of the position fix. The results are as follows: 1. The results of fourier's analysis for the theoretical PPC and the measured PPC are positive correlation in the coefficients ao, a2, a3 with A-C pair and in the coefficients aO-a3 with A-E pair, and those PPC are apparent to daily periodicity during all measured time. The initial phase is around to 280\ulcorner with A-C pair and 1800 with A-E pair. 2. Daily variatons of the phase difference tend to decrease and the time width to narrow from April toward July, but these variations are opposed to those from July toward October. 3. Mean value of total errors of the position fix by theoretical PPC is 2.67 miles and its standard deviationis O.90miles. 4. Mean value of total errors of the position fix by the measured PPC is 0.63 miles and its standard deviation is 0.217 miles.

• International Journal of Concrete Structures and Materials
• /
• 제9권1호
• /
• pp.55-60
• /
• 2015

In this study, influence of different stone powders (SP), including limestone powders (LP), quartzite powders (QP), and granitic powders (GP), on the hydration behaviors of portland cement, for example, setting time, hydration heat, and hydration products, were discussed. The initial and the final setting time both shorten when the content of LP is 5 %, however, they are slightly delayed by the other two SPs. The LP has no obvious influence on the arrival time of the first peak in the exothermal curves, and it makes the peak value decrease; the other two SPs postpone the appearance of the first peak, and they also make the peak value decrease. For the second peak, LP shifts the peak position to the left, QP has no effect on this peak position, and GP makes the appearance of this peak delayed by 143 min. Similarly, three kinds of SPs have different influence on the hydration products of portland cement. The LP precipitates the formation of hydrated calcium carbo aluminate, the QP the formation of hydrated garnet, and the GP makes the amount of Tobermorite increase.

• Korean Membrane Journal
• /
• 제8권1호
• /
• pp.50-57
• /
• 2006

We treated lake water by ceramic ultrafiltration membranes and found the optimal backflushing period and trans-membrane pressure (TMP) of periodic water-backflushing system. The optimal filtration time interval at fixed BT = 3 sec was 30 for A002 membrane in all viewpoints of $J/J_0,\;R_f$, and $V_T$, and we could acquire the highest $V_T$ value in the membranes used here. However, the highest $V_T$ was acquired at FT = 60 sec for M9, and at FT = 90 sec for C005 membrane. Then the lower TMP reduced the membrane fouling during filtration of lake water, and could maintain the higher permeate flux compared with the initial flux. However, the largest value $V_T$ could be obtained at the highest TMP condition for M9 membrane at fixed FT = 60 sec and BT = 3 sec. The quality of treated water in our UF ceramic system was Turbidity = $0.20{\sim}4.88NTU$, $COD_{Mn} = 0.00{\sim}2.58 mg/L$, $TDS = l8{\sim}71 mg/L$, and $NH_3-N = 0.004{\sim}1.689 mg/L$.

• Educational Technology International
• /
• 제19권1호
• /
• pp.1-33
• /
• 2018

The present study aimed to develop a self-reported measurement instrument - the Empathetic School Community Competency Inventory (ESCCI)-to better understand members' empathetic sense to schools as their community in the context of secondary schools in South Korea. Based on a synthesis of the literature on the school community, empathy, and competencies, and a series of preliminary analyses with a panel of expert judges and pilot tests, initial ESCCI items were developed. In total, 435 students and 134 teachers from secondary schools in South Korea provided usable data as measured by the ESCCI. The results of EFA and CFA suggested a five-factor model: culture of respect ( α = .94), empathetic community identity ( α = .93), communication structure (α = .91), emotion immersion (α = .91), and caring process (α =.89) with χ² (980, n = 285) = 3080.169; p-value < .0001, RMSEA = 0.068; 90% CI [.059, .064], p-value < .0001; CFI = .88; SRMR = 0.04; and TLI = .88, leaving 46 items out of initially developed 76 items. The ESCCI model developed based on the findings of the study can be used to assess schools' competency as an empathetic community and design programs to promote empathetic school cultures in secondary schools in South Korea. Implications and limitations of the study are discussed.