• The Journal of Advanced Prosthodontics
• /
• v.8 no.1
• /
• pp.62-69
• /
• 2016

PURPOSE. The purpose of this study was to evaluate the effects of abutment screw length and cyclic loading on the removal torque (RTV) in external hex (EH) and internal hex (IH) implants. MATERIALS AND METHODS. Forty screw-retained single crowns were connected to external and internal hex implants. The prepared titanium abutment screws were classified into 8 groups based on the number of threads (n = 5 per group): EH 12.5, 6.5, 3.5, 2.5 and IH 6.5, 5, 3.5, 2.5 threads. The abutment screws were tightened with 20 Ncm torque twice with 10-minute intervals. After 5 minutes, the initial RTVs of the abutment screws were measured with a digital torque gauge (MGT12). A customized jig was constructed to apply a load along the implant long axis at the central fossa of the maxillary first molar. The post-loading RTVs were measured after 16,000 cycles of mechanical loading with 50 N at a 1-Hz frequency. Statistical analysis included one-way analysis of variance and paired t-tests. RESULTS. The post-loading RTVs were significantly lower than the initial RTVs in the EH 2.5 thread and IH 2.5 thread groups (P<.05). The initial RTVs exhibited no significant differences among the 8 groups, whereas the post-loading RTVs of the EH 6.5 and EH 3.5 thread groups were higher than those of the IH 3.5 thread group (P<.05). CONCLUSION. Within the limitations of this study, the external hex implants with short screw lengths were more advantageous than internal hex implants with short screw lengths in torque maintenance after cyclic loading.

• KSBB Journal
• /
• v.9 no.4
• /
• pp.365-371
• /
• 1994

The effects of ratios of initial concentration of carbon source to the initial concentration of nitrogen source in the fermentation media on both the yields of PHB fermentation variables and the accumulation of poly-${\beta}$-hydroxybutyric acid(PHB) were investigated. The fermentation media were composed of the combination of varing glucose concentrations, 10, 20, 25, 30, 40, $50g/\ell$ and the NH4Cl concentrations 0.33, 0.4, 0.5, 1.5, 3, $5g/\ell$. The yield of biomass on glucos, Yx/s, decreased very slowly according to the increase of the ratio of C to N. And the yield became constant at 0.35(g biomass/g glucose) with the ratio higher than 70. The yield of residual biomass, Yx/s, also decreased with the ratio of C to N and finally showed a constant value of 0.065(g residual biomass/g glucose) when the ratio was higher than 65. In accordance with the augmentation of the ratio, the yield of PHB, YPHB/S, however, increased and showed the maximum value of 0.35 (g PHB/g glucose) between 40 and 60 of the ratio. The maximum yield of PHB to the change of biomass, YPHB/S, was 0.87(g PHB/g biomass), and the yie1d YPHB/RX, was 4.2(g PHB/g residual biomass). The maximum accumulation percent of PHB to the final biomass was 81% when the ratio was higher than 67.

• Tuberculosis and Respiratory Diseases
• /
• v.69 no.2
• /
• pp.103-107
• /
• 2010

Background: The aim of the present study was to evaluate whether findings on initial chest computed tomography (CT) of influenza pneumonia can help predict clinical outcome. Methods: We reviewed all adult patients admitted to the Emergency Department (ED) with a confirmed diagnosis of novel influenza A H1N1 virus (2009 H1N1) pneumonia, who underwent chest CT upon admission between Aug 26, 2009 and Jan 31, 2010. Radiologic findings were characterized by type and pattern of opacities and zonal distribution. Clinical outcome measures were intensive care unit (ICU) admission, mechanical ventilation, and inhospital death. Results: Of 59 patients diagnosed with 2009 H1N1 pneumonia, 41 (69.5%) underwent chest CT on admission into ED. Nine (22%) of these patients developed adverse clinical outcomes requiring the following treatments: 9 (22.0%) ICU admissions, 5 (12.2%) mechanical ventilation, and 3 (7.3%) inhospital deaths. Counting the number of patients with more than 4 involved lobes, the sensitivity, specificity, positive predictive value, and negative predictive value for detection of adverse clinical outcome were 67%, 84%, 55% and 80%, respectively. Conclusion: Extensive involvement of both lungs (over 4 lobes) is related to ICU admission, mechanical ventilation, and inhospital death. Initial chest CT may help predict an adverse clinical outcome of patients with 2009 H1N1 influenza pneumonia.

• Journal of Environmental Science International
• /
• v.12 no.9
• /
• pp.997-1004
• /
• 2003

The objective of this research was to test whether, under controlled laboratory conditions, hybrid SNCR/SCR process improves N $O_{x}$ removal efficiency in comparison with the SNCR only. The hybrid process is a combination of a redesigned existing SNCR with a new downstream SCR. N $O_{x}$ reduction experiments using a hybrid SNCR/SCR process have been conducted in simple NO/N $H_3$/ $O_2$ gas mixtures. Total gas flow rate was kept constant 4 liter/min throughout the SNCR and SCR reactors, where initial N $O_{x}$ concentration was 500 ppm in the presence of 5% or 15% $O_2$. Commercial catalysts, $V_2$ $O_{5}$ -W $O_3$-S $O_4$/Ti $O_2$, were used for SCR N $O_{x}$ reduction. The residence time and space velocity were around 1.67 seconds and 2,400 $h^{-1}$ or 6000 $h^{-1}$ in SNCR and SCR reactors, respectively. N $O_{x}$ reduction of the hybrid system was always higher than could be achieved by SNCR alone at a given value of N $H_{3SLIP}$. Optimization of the hybrid system performance requires maximizing N $O_{x}$ removal in the SNCR process. An analysis based on the hybrid system performance in this lab-scale work indicates that a equipment with N $O_{xi}$ =500 ppm will achieve a total N $O_{x}$ removal of about 90 percent with N $H_{3SLIP}$ $\leq$ 5 ppm only if the SNCR N $O_{x}$ reduction is at least 60 percent. A hybrid SNCR/SCR process has shown about 26∼37% more N $O_{x}$ reduction than a SNCR unit process in which a lower temperature of 85$0^{\circ}C$ turned out to be more effective.be more effective.

• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.138-143
• /
• 2007

This study goes in for the observation of the characteristics of nitrogen removal from swine wastewater by struvite crystallization. In addition, the struvite formation potential in supernatants after struvite crystallization was investigated. In the study for nitrogen removal by struvite crystallization, the effects of pH and molar ratio of magnesium (Mg) injected using bittern as Mg source were investigated. Also, the potential of struvite formation in the supernatant with amount of Mg added was carefully observed. As the results, the optimum pH in the removal of nitrogen was 8.8 and sludge volume was increased as pH was raised from 7 to 12 under the condition that the molar ratio of $Mg^{2+}$ to ${NH_4}^+$-N to ${PO_4}^{3-}$-P was 1:1:1. An optimum removal efficiency of ammonia-N was observed at 1 molar ratio of Mg to ${NH_4}^+$-N, showing no further increase at over 1 molar ratio and dramatical deterioration at under 1 molar ratio. However, the sludge volume was increased by increasing the molar ratio of Mg. In the experiments for the potential of struvite formation in the supernatants, initial -log([$Mg^{2+}$][${NH_4}^+$][${PO_4}^{3-}$]) value was much lower than $pK_{sp}$ and gradually reached $pK_{sp}$ at 2 days, as the molar ratio of Mg increased over 1.2. At 31 days, -log([$Mg^{2+}$][${NH_4}^+$][${PO_4}^{3-}$]) value was returned to the initial value. In addition, the supernatants had a potential precipitation of hydroxylapatite due to calcium contained in bittern, $K_2Mg(SO_4)_3$ and $K_3Na(SO_4)_2$ resulting from the decrease of sodium and potassium in supernatants formed after struvite crystallization as times go by. Based on the results, it appears that some retention time and proper dosage of Mg may be needed for the prevention of scale in pipe line.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.12
• /
• pp.1283-1288
• /
• 2004

Metal-ferroelectric-insulator-semiconductor(WFIS) capacitors using rapid thermal annealed LiNbO$_3$/AlN/Si(100) structure were fabricated and demonstrated nonvolatile memory operations. The capacitors on highly doped Si wafer showed hysteresis behavior like a butterfly shape due to the ferroelectric nature of the LiNbO$_3$ films. The typical dielectric constant value of LiNbO$_3$ film in the MFIS device was about 27, The gate leakage current density of the MFIS capacitor was 10$^{-9}$ A/cm$^2$ order at the electric field of 500 kV/cm. The typical measured remnant polarization(2P$_{r}$) and coercive filed(Ec) values were about 1.2 $\mu$C/cm$^2$ and 120 kV/cm, respectively The ferroelectric capacitors showed no polarization degradation up to 10$^{11}$ switching cycles when subjected to symmetric bipolar voltage pulses of 1 MHz. The switching charges degraded only by 10 % of their initial values after 4 days at room temperature.e.

• YAKHAK HOEJI
• /
• v.46 no.3
• /
• pp.168-173
• /
• 2002

The physicochemical properties of aloesin, which has been recently found to reduce renal toxicity induced by cis-platin, were studied including solubility, partition coefficient ( $P_{c}$ ), osmolality, and stability. The solubility of aloesin was about 500 mg/mι, and the $P_{c}$ value for n-octanol/water was 1.01 $\pm$ 0.03. The degradation of aloesin followed the pseudo-first-order kinetics and was dependent on temperature, pH and ionic strength. From the pH-rate profile, the optimal pH was found to be 2.0~3.0. Some metal ions increased the degradation rate in the rank order of M $n^{2+}$ ＞ F $e^{3+}$ ＞ C $u^{2+}$ ＞ F $e^{2+}$. On the other hand, other metal ions such as B $i^{3+}$, $Ba^{2+}$, Z $n^{2+}$, N $i^{2+}$, $Co^{2+}$ and $Mg^{2+}$ did not show the unfavorable effects. After autoclaving, aloesin contents remaining were 81.8~98.8% of initial concentrations depending on pH. The most stable pH was 3.98 in the autoclaving. Osmolality increased linearly as concentration increased.sed.creased.sed.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.8
• /
• pp.29-33
• /
• 2015

This paper proposes a discrete logarithm algorithm that remarkably reduces the execution time of Pollard's Rho algorithm. Pollard's Rho algorithm computes congruence or collision of ${\alpha}^a{\beta}^b{\equiv}{\alpha}^A{\beta}^B$ (modp) from the initial value a = b = 0, only to derive ${\gamma}$ from $(a+b{\gamma})=(A+B{\gamma})$, ${\gamma}(B-b)=(a-A)$. The basic Pollard's Rho algorithm computes $x_i=(x_{i-1})^2,{\alpha}x_{i-1},{\beta}x_{i-1}$ given ${\alpha}^a{\beta}^b{\equiv}x$(modp), and the general algorithm computes $x_i=(x_{i-1})^2$, $Mx_{i-1}$, $Nx_{i-1}$ for randomly selected $M={\alpha}^m$, $N={\beta}^n$. This paper proposes 4-model Pollard Rho algorithm that seeks ${\beta}_{\gamma}={\alpha}^{\gamma},{\beta}_{\gamma}={\alpha}^{(p-1)/2+{\gamma}}$, and ${\beta}_{{\gamma}^{-1}}={\alpha}^{(p-1)-{\gamma}}$) from $m=n={\lceil}{\sqrt{n}{\rceil}$, (a,b) = (0,0), (1,1). The proposed algorithm has proven to improve the performance of the (0,0)-basic Pollard's Rho algorithm by 71.70%.

• Bulletin of the Korean Mathematical Society
• /
• v.61 no.1
• /
• pp.161-193
• /
• 2024

In this paper, we consider the asymptotic behavior of solutions for the partly dissipative reaction diffusion systems of the FitzHugh-Nagumo type with hereditary memory and a very large class of nonlinearities, which have no restriction on the upper growth of the nonlinearity. We first prove the existence and uniqueness of weak solutions to the initial boundary value problem for the above-mentioned model. Next, we investigate the existence of a uniform attractor of this problem, where the time-dependent forcing term h ∈ L²_b(ℝ; H^-1(ℝ^N)) is the only translation bounded instead of translation compact. Finally, we prove the regularity of the uniform attractor A, i.e., A is a bounded subset of H²(ℝ^N) × H¹(ℝ^N) × L²_µ(ℝ⁺, H²(ℝ^N)). The results in this paper will extend and improve some previously obtained results, which have not been studied before in the case of non-autonomous, exponential growth nonlinearity and contain memory kernels.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3319-3326
• /
• 2014

Eosin yellow is used a dye and colorant but it is harmful toxic substance. In this paper, batch adsorption studies were carried out for equilibrium, kinetics and thermodynamic parameters for eosin yellow adsorption by activated carbon with varying the operating variables like pH, initial concentration, contact time. Equilibrium adsorption data were fitted into Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherms. By estimated Langmuir constant value, $R_L$=0.067-0.083, and Freundlich constant value, $\frac{1}{n}=0.237-0.267$, this process could be employed as effective treatment for removal of eosin yellow. From calculated Temkin constant, value, B=1.868-2.855 J/mol, and Dubinin-Radushkevich constant, value, E=5.345-5.735 kJ/mol, this adsorption process is physical adsorption. From kinetic experiments, the adsorption process were found to confirm to the pseudo second order model with good correlation coefficient($r^2$=0.995-0.998). The mechanism of the adsorption process was determined two step like as boundary and intraparticle diffusion.