• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2067-2072
• /
• 2007

Understanding of the impinging behavior of an electrically charged spray is essential in determining appropriate operating conditions for electro-spraying of paints, surface coating materials and insecticides. In the present work, as an initial step, the wall impact of an electrically charged droplet has been experimentally investigated. The charged drops were directed on the surface of a paraffin wax, and the impinging behavior was visualized and recorded using a CCD camera to identify the impingement regime. The spread-rebound boundary for the charged drop turned out to be smaller compared to that for an electrically neutral droplet under the same surface condition. The shift of the transition criterion is considered to be due to the discrepancy between the maximum spread ratio of the electrically charged droplet and that of the neutral droplet.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.205-209
• /
• 2009

Wetting properties between silver-copper-titanium braze alloys with different titanium contents up to 2.8 mass% and hexagonal boron nitride ceramics were investigated using sessile drop method at 1123K in Argon. The final contact angle is less than $30^{\circ}$ when the Ti content was over 0.41 mass%. Meanwhile, the contact angle curves show different behavior. In case of using braze alloy containing 2.8 mass% of titanium, the initial contact angle is acute angle just after the melting of braze. In case of brazes containing titanium less than 2.26 mass%, the contact angle is larger than $90^{\circ}$ at the beginning and slowly decreases to acute angle. The reaction layer of titanium nitride is observed at the interface. In addition, the reaction of Ti in the braze and N in the bulk h-BN seemed to show diffusion limited spreading.

• 전기화학회지
• /
• 제7권2호
• /
• pp.80-82
• /
• 2004

The a.c. technique is employed to evaluate electrochemical characteristics of Naphthalie-1,4,5,8-tetracarboxylic acid bisanilide (NTB). The measurements were carried out in dry and pure propionitrle (PCN) and acetonitrile(CAN) at the hanging mercury drop electrode [HMDE). An A.C. phase sensitive detector using computer controlled lock-in amplifier was employed. Primary goal of this report, was to establish on a firm the rare behavior of the phase angle associated with a.c. polarograms of the compound. Although, not an initial goal of this study, the electron transfer rate parameters attending the electroreduction of the compound under investigation were determined. This because the results shed some light on the electrokinetics in aprotic solvent which until recently negligible data were available. Experimental Results and comparison of data obtained are reported. The good precision of the method makes it suitable for studying electrochemical data with unusual behavior at electrodes in non aqueous media.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1219-1224
• /
• 2004

In this study the optimization of plate-fin type heat sink with vortex generator for thermal stability is conducted numerically. To acquire the optimal design variables, the CFD and mathematical optimization are integrated. The flow and thermal fields are predicted using the finite volume method. The optimization is carried out by means of the sequential quadratic programming (SQP) method. The results show that when the temperature rise is less than 40 K, the optimal design variables are as follows; $B_1=2.584mm$, $B_2=1.741mm$, and t = 7.914 mm. Comparing with the initial design, the temperature rise is reduced by 4.2 K, while the pressure drop is increased by 9.43 Pa. The Pareto optimal solutions are also presented between the pressure drop and the temperature rise.

• Preventive Nutrition and Food Science
• /
• 제1권2호
• /
• pp.159-167
• /
• 1996

Effect of covering various levels(0, 1, 3, 5 and 7% per Chinese radish weight) of bamboo(Pseudosasa japonica Makino) leaves on the surface of Dongchimi was studied in the course of fermenting at 1$0^{\circ}C$ up to 75 days. Physicochemical, microbiogical, and sensory characteristics of Dongchimi were analyzed at regular intervals of 5 to 7 days during fermentation. Both the degree of pH drop from the initial 6.47~6.54and increase total acid content from the initial 0.004%, with the accumulation of organic acids tended to be more gradual depending upon the amounts of bamboo leaves covered. The increases of total solid content and turbidity were also suppressed in similar patterns, notably after 13 days of fermentation. The growth of total bacteria(1.5$\times$10$^4$cfu/ml, initial)was partly inhibited while that of lactic acid bacteria(1.8$\times$10$^4$cfu/ml, initial)was favorably encouraged by the presence of bamboo leaves. As a result of sensory evaluation, Dong-chimi covered with 1 and 3% bamboo leaves on showed the higher scores significantly(p<0.05, p<0.01, p<0.001) in overall acceptability till 39 days. But after 61 days, those covered with 3 and 5% bamboo leaves were rather preferable than any other one.

• 한국전산구조공학회논문집
• /
• 제24권6호
• /
• pp.609-616
• /
• 2011

콘크리트와 철근의 재료모델 그리고 스톡앵커의 낙하거리 변화에 따른 아치형 해저 케이블 보호구조물의 충돌특성을 분석하였다. 콘크리트의 재료모델로는 plastic kinematic모델과 Johnson-Holmquist Concrete모델이, 철근의 재료모델은 선형탄성모델과 plastic kinematic모델이 고려되었다. 스톡앵커의 무게는 2ton이며 낙하거리는 3, 5, 8.83m로 선정되었다. 충돌해석을 위해 유한요소해석 프로그램 ANSYS가 사용되었고, 해석시간 단축을 위해 낙하거리를 초기속도로 변화하는 기법을 사용하였다. 낙하거리 변화에 따른 재료모델의 민감성을 분석한 결과, 콘크리트의 충돌응답은 콘크리트모델에 민감하고 철근의 충돌응답은 일차적으로 철근모델에 이차적으로 콘크리트모델에 민감함을 알 수 있었다.

• 대한기계학회논문집B
• /
• 제25권6호
• /
• pp.845-852
• /
• 2001

The characteristics of evaporation cooling of single droplet on a heated surface were studied experimentally. The two kinds of heater modules were tested to measure cooling characteristics of metal surface (high conductivity) and Teflon surface (low-energy surface, low conductivity). The results showed that time averaged heat flux during droplet evaporation increased exponentially with initial surface temperatures of brass, copper and steel. The heat flux and evaporation time did not varied with metal conductivities. However, the temperature drop after the deposition of droplet was larger on Teflon than on the metals. Thus, the correlation of interface temperature between liquid droplet and metal surface was proposed as a function of the initial surface temperature of heating materials, which could be applied to both metal and non-metal ones.

• Journal of Power Electronics
• /
• 제13권1호
• /
• pp.94-103
• /
• 2013

A capacitor deterioration of LCL-filter grid-connected PWM converters is progressed by the self-healing mechanism. It leads to the degradation of the filter performance and drop of power factor. Thus, it is required to diagnose fault-point of capacitors and determine the replacement time. Typically, the fault of capacitors is determined when the capacitance is reduced up to 80% from initial value. This paper proposes algorithm to the determine capacitor replacement time of an LCL filter. The algorithm takes the advantage of change of the response on the injected resonant frequency corresponding to 80% value from the initial capacitance. The results of the algorithm are demonstrated through simulations and experiments.

• 융합신호처리학회논문지
• /
• 제1권2호
• /
• pp.122-130
• /
• 2000

본 논문에서는 다중접속 프로토콜인 PRMA의 변형된 모델에 대해서 다뤘다. 기존의 PRMA에서는 초기 접속 시 얻은 슬롯을 휴지기에 잃게되므로 매 활성기마다 다시 슬롯을 접속함으로써 추가적인 패킷의 폐기가 발생하는 반면, 변형된 모델에서는 슬롯예약을 유지하기 위한 제어미니슬롯을 사용함으로써 초기 접속 이후의 추가적인 패킷 폐기가 발생하지 않는다.

• 태양에너지
• /
• 제20권1호
• /
• pp.55-62
• /
• 2000

An experimental study on the stratified fluids with water and silicon oil of same volume in the cavity with upper cooling surface was carried out to investigate the flow characteristics, heat transfer through the interface of fluids, and the applications of thermal behaviors in a square cavity. The experiments were performed with variation of initial temperature and cooling surface temperature. The temperature drop of oil was faster than that of water and freezing was initiated from the interface of oil and water and propagated downward. For the water above $4^{\circ}C$, the cooling rate was faster than that below $4^{\circ}C$ and showed almost same temperature distribution but for the water that of below $4^{\circ}C$, it showed the stable stratified temperature distribution. The lower the initial temperature and the higher the cooling surface temperature was, the longer the supercooling duration.