• Transactions of Materials Processing
• /
• v.5 no.2
• /
• pp.97-104
• /
• 1996

It is very important to obtain the knowledge of loads and flow patterns in most processes because these information are the fundamental data of die design and process design. The objective of present study is to investigate loads and metal flow patterns for various process conditions in flat die extrusion of square-bars from circular billets. For analyzing the metal flow patterns of the billets photo etching is used on sections of split specimen. From this method metal flow patterns are analyzed for various area reductions friction factors and punch stroke through the process from initial-stage to final-stage. Experiments are carried out with hard solder billets at room temperature.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.4
• /
• pp.455-461
• /
• 2008

This article describes a part of collaborative research between industry and academy to develop an initial hull form of 46 feet motor yacht. Hydrodynamic performances such as stability, resistance and seaworthiness were estimated after completing the procedure of hull form design in the initial design stage.

• Journal of Ship and Ocean Technology
• /
• v.11 no.1
• /
• pp.11-24
• /
• 2007

Better prediction of a ship's manouevrabilty in initial design stage is becoming more, important as IMO manoeuvring criteria has been activated in the year of 2004. In the present study, in order to obtain more exact and reliable results for ship manoeuvrability in the initial design stage, numerical simulation is carried out by use of RANS equation based calculation of hydrodynamic forces exerted upon the ship hull. Other forces such as rudder force and propeller force are estimated by one of the empirical models recommended by MMG Group. Calculated hydrodynamic force coefficients are compared with those obtained by empirical models. Standard manoeuvring simulations such as turning circle and zig-zag are also carried out for a medium size Product Carrier and the results are compared with those of pure empirical models and manoeuvring sea trial. Generally good qualitative agreement is obtained in hydrodynamic forces due to steady oblique motion and steady turning motion between the results of CFD calculation and those of MMG model, which is based on empirical formulas. The results of standard manoeuvring simulation also show good agreement with sea trial results.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.47-51
• /
• 2009

It is well known that a rudder is influential devices to help ship maintain its stable performances, such as a course-keeping and maneuverability. In the procedures of a commercial ship design proper rudder dimensions (area and shape) ensuring better ship maneuverability have been settled in an initial concept design stage performed by a preceding department, without little structural consideration. It is true that there are time discrepancy between an initial design and a structural analysis stage. Therefore structural analysis results would sometimes cause a rudder to modify its dimensions. Most of these cases, however, ship design and performance tests had been finished. In this matter, only limited modifications of redder could be carried out. Besides, these could also cause bad effects on productivity. Finally, it is necessary to develop a new program considering co-relationship between an initial rudder design and a following work, a structural strength analysis, in order to enhance productivity and minimize a rate of redesign procedures.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.1
• /
• pp.1-7
• /
• 2020

In general, an inspection schedule is established based on the long-term fatigue life during the design stage. However, in the design stage, it is difficult to clearly identify the uncertainty factors affecting long-term fatigue life. In this study, the probabilistic fatigue life assessment was conducted in accordance with the methodology of DNV-GL. Firstly, The initial crack distribution estimated through the initial crack propagation analysis was updated by reflecting the results of crack inspection. Secondly, the updated crack distribution was compared with the initial crack distribution, and the probability of failure was updated with the effect of crack inspection.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.1-9
• /
• 1998

The analysis concerns collapse behavior of framed vehicle models with the change of design parameters at the initial stage of conceptual design. Collapse analysis of a vehicle model with framed structures has been carried out using finite element limit analysis. The analysis makes sequential changes of design parameters from an initial model with frames of uniform section so as to stage then weak parts. As a result of those design changes, the collapse load of a model has been increased and the deflection toward a passenger room has been reduced. The results demonstrate the versatility of finite element limit analysis as a tool that confirms the safety of vehicle models.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.2
• /
• pp.111-119
• /
• 2015

In the initial ship design stage, performance predictions are generally carried out before and after the hull form design. The former is based on the main dimensions and power information, and the latter is based on the geometry of the hull form and propeller. This paper deals with the practical application of neural networks for the prediction of a ship's performance factors before and after the hull form design. For this, the hull form parameters that affect the performance are studied, and an optimal neural network structure based on the SSMB database is constructed. By comparing the results predicted by neural networks and the model test results, we confirmed that neural networks can be applied to practically evaluate the performance in the initial ship design stage.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.6
• /
• pp.405-412
• /
• 2007

It's difficult for manufacturers to derive a new design from the demands of consumers as quickly as possible and a designer carries out design operation using insufficient resources in initial design. To carry out initial design process efficiently for an excavator front group, it is necessary for a designer to manage lots of parameter with an existing knowledge or with in-house know-how and develop function module that calculates working range and excavator force. By doing so, it will bring up the optimized values of parameters based on the DOE in the early design stage. In this paper, a new approach to improve the process with optimized parameters is proposed to reduce a product development time of the excavator front design.

• Journal of the Korea Concrete Institute
• /
• v.12 no.4
• /
• pp.121-130
• /
• 2000

Current engineering practice in determining sectional dimensions of prestressed concrete (PSC) girders for bridges is primarily based on the code-specified allowable concrete stresses at different loading stages. It is customary that tendons and sectional dimensions are calibrated and tendon forces are applied at once at the initial stage to keep the subsequent stresses occurring at different loading stages within the allowable stresses. This traditional tensioning method, however, usually results in a too conservative sectional depth in view of ultimate capacity of a girder. A new design method which can realize the reduction of sectional depth of PSC girders is theoretically suggested in this study. Tendons are tensioned twice at different loading stages: the initial stage and the stage after fresh slab concrete is cast. It can be shown that according to this technique, sectional depth can be significantly reduced and larger span can be realized compared to traditional ones. Parametric studies are performed with due considerations given to its practical applications.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.187-189
• /
• 2009

Fibre to the home (FTTH) in KOREA has grown rapidly in recent years. The number of FTTH subscribers exceeded 6.6 millions by end of DEC 2008. It seems that FTTH has moved from the initial, the growth stage to the mature stage. Some design techniques have been developed in order to construct the access network effectively for the mature stage. This paper deal with design, construction and maintenance of optical fibre access networks immediately, effectively and economically.