• 공업화학
• /
• 제30권2호
• /
• pp.190-197
• /
• 2019

활성탄을 사용하여 수용액으로부터 메틸 그린 염료의 흡착에 대해 초기농도와 접촉시간 및 온도를 흡착변수로 사용하여 조사하였다. 흡착평형관계는 Freundlich 등온식에 잘 맞았다. 평가된 Freundlich 분리계수(1/n = 0.212~0.305)로부터 이 흡착공정이 효과적인 처리영역(0 < $R_L$ < 1)에 속하는 것을 알았다. BET식으로부터 얻은 등온포화용량은 온도가 증가할수록 커졌다. Dubinin-Radushkevich식으로 구한 흡착에너지값(E = 316.869~340.049 J/mol)으로부터 흡착공정이 물리흡착공정임을 알았다. 흡착속도실험결과는 유사 2차 반응속도식에 잘 맞는 것으로 나타났다. 자유에너지(-5.421~-7.889 kJ/mol)와 엔탈피(31.915 kJ/mol)는 흡착공정이 자발적이고 흡열반응으로 진행되었다고 알려주었다. 등량흡착열은 평형흡착량이 증가함에 따라 커졌으며, 표면 덮임이 증가됨에 따라 흡착제-흡착질의 총 상호작용도 증가하였다.

• 한국재료학회지
• /
• 제31권1호
• /
• pp.38-42
• /
• 2021

In this study, high temperature wetting analysis and AZ80/Ti interfacial structure observation are performed for the mixture of AZ80 and Ti, and the effect of Al on wetting in Mg alloy is examined. Both molten AZ80 and pure Mg have excellent wettability because the wet angle between molten droplets and the Ti substrate is about 10° from initial contact. Wetting angle decreases with time, and wetting phenomenon continues between droplets and substrate; the change in wetting angle does not show a significant difference when comparing AZ80-Ti and Mg-Ti. As a result of XRD of the lower surface of the AZ80-Ti sample, in addition to the Ti peak of the substrate, the peak of TiAl3, which is a Ti-Al intermetallic compound, is confirmed, and TiAl3 is generated in the Al enrichment region of the Ti substrate surface. EDS analysis is performed on the droplet tip portion of the sample section in which pure Mg droplets are dropped on the Ti substrate. Concentration of oxygen by the natural oxide film is not confirmed on the Ti surface, but oxygen is distributed at the tip of the droplet on the Mg side. Molten AZ80 and Ti-based compound phases are produced by thickening of Al in the vicinity of Ti after wetting is completed, and Al in the Mg alloy does not affect the wetting. The driving force of wetting progression is a thermite reaction that occurs between Mg and TiO2, and then Al in AZ80 thickens on the Ti substrate interface to form an intermetallic compound.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2207-2219
• /
• 2018

Activated carbon (AC) was synthesized from Phoenix dactylifera stones and then modified by $CoFe_2O_4$ magnetic nanocomposite for use as a Cr(VI) adsorbent. Both $AC/CoFe_2O_4$ composite and AC were fully characterized by FTIR, SEM, XRD, TEM, TGA, and VSM techniques. Based on the surface analyses, the addition of $CoFe_2O_4$ nanoparticles had a significant effect on the thermal stability and crystalline structure of AC. Factors affecting chromium removal efficiency like pH, dosage, contact time, temperature, and initial Cr(VI) concentration were investigated. The best pH was found 2 and 3 for Cr adsorption by AC and $AC/CoFe_2O_4$ composite, respectively. The presence of ion sulfate had a greater effect on the chromium sorption efficiency than nitrate and chlorine ions. The results illustrated that both adsorbents can be used up to seven times to adsorb chromium. The adsorption process was examined by three isothermal models, and Freundlich was chosen as the best one. The experimental data were well fitted by pseudo-second-order kinetic model. The half-life ($t_{1/2}$) of hexavalent chromium using AC and $AC/CoFe_2O_4$ magnetic composite was obtained as 5.18 min and 1.52 min, respectively. Cr(VI) adsorption by AC and $AC/CoFe_2O_4$ magnetic composite was spontaneous and exothermic. In general, our study showed that the composition of $CoFe_2O_4$ magnetic nanoparticles with AC can increase the adsorption capacity of AC from 36 mg/L to 70 mg/L.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제24권4호
• /
• pp.384-391
• /
• 2021

Purpose: The Cow's Milk-related Symptom Score (CoMiSS^TM) was developed as an awareness tool for evaluating cow's milk-related symptoms in otherwise healthy children. Using a convenience sample of participants, this cross-sectional study aimed to determine CoMiSS^TM values of symptomatic infants based on retrospectively or prospectively obtained information. Methods: CoMiSS^TM values were determined in infants aged <12 months with symptoms suggestive of cow's milk protein allergy or functional gastrointestinal disorders. The exclusion criteria were previous diagnosis with acute or chronic disease, treatment with a therapeutic formula, and in case of breastfeeding, an elimination diet followed by the mother. Two CoMiSS^TM values were assessed. A retrospective collection was defined as the collection of data after initial contact with the medical center but before the first medical consultation. A prospective collection was defined as the collection of data within 24 hours from the time of medical consultation but before starting any therapeutic intervention. The CoMiSS^TM total and individual component scores obtained retrospectively or prospectively were compared between groups using the Wilcoxon signed-rank test. Results: This study was performed between August and November 2019. Data of 110 children (62 males and 48 females), with a mean±standard deviation age of 18.2±11.7 weeks, were obtained. The total CoMiSS^TM value (p<0.001) and some individual component scores (crying, regurgitation, and stool) were significantly lower when collected prospectively than when collected retrospectively. Conclusion: CoMiSS^TM values were retrospectively and prospectively determined. Lower CoMiSS^TM values were obtained during prospective evaluation. Possible differences should be considered when using CoMiSS^TM in clinical practice.

• Membrane and Water Treatment
• /
• 제12권1호
• /
• pp.43-49
• /
• 2021

The Commercial polymeric membranes like Polysulfone (PSF), Polyvinylidene difluoride (PVDF) and Polyacrylonitrile (PAN) which are an integral part of water purification investigation were chosen for the shockwave (SW) exposure experiment. These membranes were prepared by blending polymer (wt. %) / DMF (solvent) followed by phase-inversion casting technique. Shockwaves are generated by using Reddy Tube lab module (Table-top Shocktube) with range of pressure (1.5, 2.5 and 5 bar). Understanding the changes in membrane before and after shock wave treatment by parameters, i.e., pure water flux (PWF), rejection (%), porosity, surface roughness (AFM), morphology (SEM) and contact angle which can significantly affect the membrane's performance. Flux values PSf membranes shows increase, 465 (pristine) to 524 (1.5wt%) LMH at 50 Psi pressure and similar enhancement was observed at 100Psi (625 to 696 LMH). Porosity also shows improvement from 73.6% to 76.84% for 15wt% PSf membranes. It was observed that membranes made of polymers such as PAN and PSF (of high w/w %) exhibits some resistance against shockwaves impact and are stable compared to other membranes. Shockwave pressure of up to 1.5 bar was sufficient enough to change properties which are crucial for performance. Membranes exposed to a maximum pressure of 5 bar completely scratched the surface and with minimum pressure of 1.5bar is optimum enough to improve the water flux and other parameters. Initial results proved that SW may be suitable alternative route to minimize/control membrane fouling and improve efficiency.

• 한국항공우주학회지
• /
• 제50권2호
• /
• pp.75-82
• /
• 2022

내부 압력과 압축하중을 받는 발사체 추진제 탱크 구조의 좌굴 하중을 비파괴적으로 예측할 수 있는 기법이 필요하다. 기하학적 초기 결함이 존재하는 단순 원통 구조의 전역 좌굴 하중은 좌굴이 발생하지 않는 범위에서의 고유진동수-압축하중의 상관관계를 이용한 Vibration correlation technique (VCT)을 사용하여 비파괴적으로 예측 가능하다. 본 연구에서는 내부 압력과 압축하중을 동시에 받는 추진제 탱크 구조 형태인 얇은 금속재 단순 원통 구조의 진동 및 좌굴 시험을 수행하였고 VCT를 이용하여 전역 좌굴 하중을 예측하였다. 두께가 얇은 구조의 진동 시험을 위해 스피커를 이용한 비접촉식 가진 방법을 이용하였고 응답은 고분자 압전 센서(PVDF)로 측정하였다. VCT로 예측된 전역 좌굴 하중을 좌굴 시험에서 측정된 좌굴 하중과 비교하여 비파괴적 전역 좌굴 하중 예측 기법을 검증하였다.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4013-4021
• /
• 2022

A kind of zirconium phosphate mesoporous coordination polymer Zr-EDTMPA was successfully synthesized and characterized using XRD, FTIR, TGA, EA, SEM-EDS, and N₂ sorption-desorption measurements. The prepared Zr-EDTMPA was first employed for the removal of Co(II) from an aqueous solution, and the effects of pH, contact time, temperature, initial Co(II) concentration, reusability, and sorption mechanism were systematically investigated. The results showed that the Zr-EDTMPA is a zirconium phosphate complex formed by the coordination of EDTMPA to Zr in a molar ratio of 1:1. The sorption of Co(II) by Zr-EDTMPA was a pH-dependent, spontaneous and endothermic process, which was better fitted to the pseudo-second-order kinetic model and Langmuir isotherm model. The Zr-EDTMPA was demonstrated to have excellent reusability and presented a high sorption capacity of 73.0 mg·g^-1 for Co(II) at pH 8.0. The sorption mechanism was mainly attributed to the strong coordination between cobalt and the untapped hydroxyl functional groups on Zr-EDTMPA, which was confirmed by XPS spectra. Therefore, as a candidate sorbent with high sorption capacity and excellent reusability, Zr-EDTMPA has a great potential for the removal of Co(II) from aqueous solutions.

• 영어영문학
• /
• 제55권5호
• /
• pp.843-863
• /
• 2009

This paper aims at tracing the appearance of Italy in W. H. Auden's poems. Auden summered on Ischia, an island in the Gulf of Naples, between 1948 and 1957. In the process of ten years of contact with Italy, Auden' poetry developed out of Italy, and contributed to the world's picture of Italy by English poets. In the early part of his stay, Auden was fascinated with Italy and found a source of vitality for composing his poems. But Auden's initial view of Italian culture evolved from extolling its virtues to a more critical one weighing its losses and benefits. The happiest mood is reflected in "In Praise of Limestone", in which the ground itself becomes a symbol of Eden. "Ischia" introduces the real landscape of the island. Auden partly admits the darkness of the island in the aspects of its past history and legends, but the poem is still mainly about praising the beauty of the island and the comfort that it gives to the poet. In "Goodbye to the Mezzogiorno" the negative side of the island's life comes to light. There was something in the setting, warm and beautiful as it was, that no longer suited Auden's temperament and Auden bids farewell to his Mediterranean period. His view of Italy is a restricted and detached one seen through the eyes of a successful Anglo-American poet. Auden's cosmopolitan character often is defined such terms as "the Wandering Jew," "alien" or "stateless Auden". But our reading of his poems dealing with Italy reveals his true characteristics which can not transcend his evolving views.

• 무역학회지
• /
• 제47권5호
• /
• pp.273-288
• /
• 2022

This study first classifies and organizes provisions on institutional arrangements (or IAs) and dispute settlement mechanism(or DSM) in a digital trade agreement. Then it conducts a case study on seven major digital trade agreements: the CPTPP, the USJDTA, the USMCA, the ASDEA, the RCEP, the KSDPA, and the DEPA. And it finally derives implications for Korea to improve implementation of DTAs by communicating better and resolving disputes efficiently with the help of IAs and DSM-related provisions. IAs of a digital trade agreement can be defined as a set of agreements on the division of the respective responsibilities of agencies involved in implementing and enforcing the agreement, including committees, working groups, or contact points. DSM of a digital trade agreement includes consultation, mediation, arbitration, and establishment of a panel. Comparing six FTAs with an e-commerce chapter, the CPTPP, the USMCA, and the RCEP contain the most advanced type of IA provisions while the CPTPP, the USMCA, the RCEP, and the KSDPA have that of DSM provisions. Korea is its initial stage as it has only signed the KSDPA with Singapore as well as it is about to launch a new digital trade negotiation for the DEPA, the CPTPP, and even the IPEF, it is necessary to engage in negotiations with a clearer position on behalf of Korean digital companies. As provisions on IAs and DSM are important policy tools that can reflect industry concerns and convey proposals in inter-governmental dialogue, a Korean draft of the IAs and DSM-related provision should be prepared in advance.

• The Journal of Advanced Prosthodontics
• /
• 제16권2호
• /
• pp.105-114
• /
• 2024

PURPOSE. This study aimed to evaluate the effect of pretreatment of three different universal adhesives (Single Bond Universal [SBU], All-Bond Universal [ABU], and Prime&Bond universal [PBU]) on the bonding durability of an adhesive (Panavia F 2.0, PF) and a conventional (Duo-Link, DL) resin cements to air-abraded zirconia. MATERIALS AND METHODS. Rectangular-shaped zirconia specimens were prepared. The chemical composition and surface energy parameters of the materials were studied by Fourier transform infrared spectroscopy and contact angle measurement, respectively. To evaluate resin bonding to the zirconia, all the bonding specimens were immersed in water for 24 h and the specimens to be aged were additionally thermocycled 10000 times before the shear bond strength (SBS) test. RESULTS. The materials showed different surface energy parameters, including the degree of hydrophilicity/hydrophobicity. While the DL/CON (no pretreatment) showed the lowest SBS and a significant decrease in the value after thermocycling (P < .001), the PF/CON obtained a higher SBS value than the DL/CON (P < .001) and no decrease even after thermocycling (P = .839). When the universal adhesives were used with DL, their SBS values were higher than the CON (P < .05), but the trend was adhesive-specific. In conjunction with PF, the PF/SBU produced the highest SBS followed by the PF/ABU (P = .002), showing no significant decrease after thermocycling (P > .05). The initial SBS of the PF/PBU was similar to the PF/CON (P = .999), but the value decreased after thermocycling (P < .001). CONCLUSION. The universal adhesive pretreatment did not necessarily show a synergistic effect on the bonding performance of an adhesive resin cement, whereas the pretreatment was beneficial to bond strength and durability of a conventional resin cement.