• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제8권2호
• /
• pp.137-143
• /
• 2001

In this paper, we study the existence, uniqueness and norm estimate of solutions for the nonlinear delay integro-differential system.

• 한국강구조학회 논문집
• /
• 제20권3호
• /
• pp.421-435
• /
• 2008

본 논문에서는 잔류응력과 초기변형을 고려한 비선형 해석을 실시하여 송전철탑의 극한거동을 분석하였다. 송전철탑 전체 해석 모델링에 주주재, 수평재 및 1차 사재는 보(Beam)요소를 사용하였고, 기타 사재 및 보조재는 트러스(Truss)요소를 사용하였으며 구조해석프로그램 ABAQUS(2004)를 사용하였다. ABAQUS Imperfection 옵션 및 Initial condition 옵션을 사용한 초기변형 및 잔류응력 적용의 적절성을 평가하고자 판(Plate & Shell)요소 부재모델과 보요소 부재모델의 해석결과를 비교분석하였다. 보요소와 트러스 요소를 적용한 송전철탑 전체모델의 비선형 해석결과 ${P-{\triangle}}$효과로 인하여 철탑 하부 각재부 주요 부재에 좌굴파괴가 발생하였다. 본 연구에서는 구조물의 안전성에 영향을 미치는 비선형 해석인자 즉 잔류응력과 초기변형의 정도에 따른 안전성 저하값을 정량적으로 평가하여 제시하고 있다. 그러므로, 본 연구의 결과는 실제 송전철탑의 파괴극한거동에 가까운 설계법, 해석법 및 시공법 정립에 크게 기여할 것으로 판단된다.

• Journal of Korean Neurosurgical Society
• /
• 제30권2호
• /
• pp.207-210
• /
• 2001

Objective : The prognosis of spontaneous intracerebral hemorrhage often depends on initial neurologic condition, size and location of hemorrhage and associated intraventricular hemorrhage. However, age of patient, coagulation state and other associated vascular diseases may also play a role when present. In recent years, the geriatric population has been increasing. The age distribution of the patients with intracerebral hemorrhages also has been increased, accordingly. However, such patients, especially when associated with poor initial conditions often tend to be managed rather conservatively. The authors analyzed retrospectively on forty-five patients with spontaneous intracerebral hemorrhage over the seventies with poor initial condition to find out whether there exists a difference of outcome between surgery and non-surgery group. Material and Method : A total of 45 patients over seventies with spontaneous intracerebral hemorrhage with Glasgow Coma Scale(GCS) 4-8 treated over last six years were included. The validity of surgical management for these patients as well as clinical variables which might have been operated on the outcome of these patients were evaluated. The Glasgow Outcome Scale(GOS) after three months was used for comparison of outcome. Results : In surgical group(19 cases), mean age was 74.5 years old, mean hematoma volume 67.2ml and mean GCS score 5.7 points. In nonsurgical group(26 cases), mean age was 79.3 years old, mean hematoma volume 32.1ml, and mean GCS score 6.8 points. Mortality rate in surgical group was 47.4%(9 patients), including 2 cases of post-operative rebleeding, while that in nonsurgical group was 46.2%. However, when patients with initial GCS 4-6 points and over 30ml in hematoma volume were regrouped, mortality rate in surgical group was 46.2%, whereas mortality rate in nonsurgical group was 66.7%. Conclusion : It is concluded that the mortality rate is much low in surgery group with initial GCS less than 6 points and hematoma volume over 30cc. There was no significant difference of outcome in patients with basal ganglia and thalamic hemorrhage. However, surgical treatment lowered the mortality and morbidity rate in patients with subcortical and cerebellar hemorrhage.

• 한국안전학회지
• /
• 제33권2호
• /
• pp.152-157
• /
• 2018

The degradation and damage of the components for ballasted track could be caused a serious problem for railway safety. Therefore, the integrity evaluation of ballasted track condition is important to ensure and predict that the track safety and track maintenance. Various track components such as rail pad, ballast, sleeper, and rail that are widely used in Republic of Korea and represent a range of physical properties have been selected for this research. In this study, the experimental modal analysis was performed by the non-destructive testing. Modal test results were obtained from the field test and used to assess the condition of the track components. From the field test, the system of ballasted track was found to be simplified as a two-degree-of-freedom(2DOF) dynamic system. The condition of track component was found to directly affect the dynamic response of ballasted tracks. As the results, the dynamic properties of the track component was depend on the track condition and was distributed more roughly and over a wider range than its initial design values. Further, the methodology presented in this study is possible to determine experimentally the fundamental track parameters which are required in the numerical analysis, and also are useful for the safety assessment of track condition.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.93-101
• /
• 2003

The extinction of unsteady diffusion flame was experimentally studied in an opposing jet counterflow burner using diluted methane. The stabilized flame was perturbed by linearly varying velocity change that was generated by pistons installed on both sides of the air and fuel stream. As the results, the extinction of unsteady flame is dependent not only on the history of unsteadiness, but also on the initial condition. We found that there are several unsteady effects on the flame extinction. First, the extinction strain rates of unsteady cases are extended well beyond steady state extinction limits. Second, as the slope of the strain rate change increases, the unsteady extinction strain rate becomes larger. Third, the extension of unsteady extinction strain rate becomes smaller as the initial strain rate increases. We also found that the extension of the extinction limit mainly results from the unsteady response of the reaction zone because there is no retardation effect of a mixing layer for our experimental condition.

• 한국환경과학회지
• /
• 제17권1호
• /
• pp.97-105
• /
• 2008

This study examined the contaminated soils with an indicator of TPH using SVE (Soil Vapor Extraction) and biological treatments. Their results are as follows. Water content in the polluted soils slowly decreased from 15% during the initial experimental condition to 10% during the final condition. Purification of polluted soils by Bioventing system is likely to hinder the microbial activity due to decrease of water content. Removal rate of TPH in the upper reaction chamber was a half of initial removal rate at the 25th day of the experiment. The removal rate in the lower reaction chamber was 45% with concentration of 995.4 mg/kg. When the Bioventing is used the removal rate at the 14th day of the experiment was 53%, showing 7 day shortenting. Since the Bioventing method control the microbial activity due to dewatering of the polluted soil, SVE method is likely to be preferable to remove in-situ TPH. The reactor that included microbes and nutrients showed somewhat higher removal rate of TPH than the reactor that included nurtients only during experimental period. In general, the concentration showed two times peaks and then decreased, followed by slight variation of the concentration in low concentration levels. Hence, in contrast to SVE treatment, the biological treatment tend to show continuous repetitive peaks of concentration followed by concentration decrease.

• 한국수자원학회논문집
• /
• 제33권6호
• /
• pp.725-731
• /
• 2000

정지상조건에서 교각주위에 부설되는 보호공으로서 돌망태의 성능을 조사하기 위하여 실험이 수행되었다. 돌망태의 채움재료로서 사석의 크기는 돌망태의 시동에 영향을 주지않음이 밝혀졌다. 돌망태의 안정에 중요한 인자는 접근유속과 수심, 교각의 크기, 돌망태의 길이와 두께 등으로 조사 되었다. 같은량의 사석을 사용하는 경우 개체사석보다는 돌망태와 같이 집합체로서 안전성이 크게 증가된다. 돌망태의 길이가 시동에 특히 중요한 인자로서 길이를 증가하면 안전성이 증가한다. 또한 실험 결과는 교각주위 돌망태 크기의 결정식 유도에 사용되었다.

• 한국환경과학회지
• /
• 제11권6호
• /
• pp.577-582
• /
• 2002

Selective catalytic reduction and selective non-catalytic reduction processes are mainly used to treat nitrogen oxidants generated from fossil-fuel combustion. Especially, the selective non-catalytic reduction process can be operated more economical and designed more simply than the selective catalytic reduction. For this reason, many researchers carried out to increase the removal efficiency of nitrogen oxidants in the condition of low oxygen concentration by using the selective non-catalytic reduction process. However, this study was flue gas contained high oxygen concentration of 20(v/v%) with ammonia as a reducing agent. Moreover, it carried out experiment with many factors that are reaction temperature, retention time, initial NO concentration, NSR(normalized stoichiometric ratio). It was determined optimal operating conditions to improve NO removal efficiency with SNCR process. The De-NOx efficiency was increased with NSR, initial NO concentration and retention time increasement. This study has NO removal efficiency over 80% in the high oxygen concentration as well as low oxygen concentration. The injection of reducing agent may be considered for SNCR process and facility operation in 850$\^{C}$ of optimal condition.

• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.21-28
• /
• 2005

In the hot forging process lubricant influences on frictional condition only, but in the warm forging process it influence on the formability such as dimensional accuracy, filling state and frictional condition and it is important to estimate a lubricating characteristic of lubricants in the warm forging. In this paper, in order to evaluate the formability of billet in warm forging process according to the lubricant and lubricating method, lubricant and lubricating test have been performed using oil-based and water-based lubricant which were widely used in the hot and warm forging processes. The surface roughness of initial billet was measured to evaluate the influence on the formability of billet and the forming load and dimensional accuracy were compared and evaluated. From the experimental results, it can be known that water-based lubricants are more excellent than oil-based lubricants for warm forging of complex shape like a bevel gear. Also, in this study characteristics of deformation have been investigated according to surface treatment of initial billet.

• 한국소음진동공학회논문집
• /
• 제12권10호
• /
• pp.799-807
• /
• 2002

The vibration signal can give an indication of the condition of rotating machinery, highlighting potential faults such as unbalance, misalignment and bearing defects. The features in the vibration signal provide an important source of information for the faults diagnosis of rotating machinery. When additional training data become available after the initial training is completed, the conventional neural networks (NNs) must be retrained by applying total data including additional training data. This paper proposes the fault diagnostics algorithm using the ART-Kohonen network which does not destroy the initial training and can adapt additional training data that is suitable for the classification of machine condition. The results of the experiments confirm that the proposed algorithm performs better than other NNs as the self-organizing feature maps (SOFM) , learning vector quantization (LYQ) and radial basis function (RBF) NNs with respect to classification quality. The classification success rate for the ART-Kohonen network was 94 o/o and for the SOFM, LYQ and RBF network were 93 %, 93 % and 89 % respectively.