• Toxicological Research
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2001

To determine whether ozone is genotoxic at environmentally relevant exposure level, B6C3F1 mice were exposed to 0.5 ppm ozone for 12 weeks, 6 hr/day. Chromosomal aberration, supravital micronucleus and hprt mutation assays were performed. The percentage of abnormal cells was significantly increased at 0.5 ppm ozone when compared to unexposed control in chromosome aberration assay. Significant increase in the frequencies of micro nucleated reticulocytes and 6-thioguanine-resistant ($TG^r$) lymphocytes was also observed in supravital micronucleus assay using peripheral blood and lymphocyte hprt mutation assay, respectively. The results indicate, that under our experimental conditions, 0.5 ppm ozone are genotoxic in exposed B6C3F1 mice.

• Proceedings of the Korea Environmental Mutagen Society Conference
• /
• 2003.10a
• /
• pp.163-163
• /
• 2003

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.3
• /
• pp.464-471
• /
• 2002

Author applied several engineering methodologies to classical ultrasonic nebulizer to cope with it's demerits. After several trials and errors, we got the several meaningful results. To evaluate the modified ultrasonic nebulizer for inhalation toxicology of cadmium, author used light-scattering photometer. This paper is the one part of inhalation exposure systems for inhalation toxicology study of cadmium. According to the testing conditions, source temperature 50℃ and inlet-duct band temperature 150℃, aerosol generation results for sodium chloride and cadmium chloride were as followings: Coefficients of variation(CV) of sodium chloride and cadmium chloride for repeated trials were 3.38 and 4.77 for 10g, 2.47 and 5.02 for 5g, and 4.70 and 2.98 for 2.5g. All the CVs were within 10% of acceptance variability. Count Per Minute(CPM) changes of NaCl and CdCl₂ for 5 repeated trials were similar. CPM ratios of CdCl₂/NaCl were 1.13 for 10g, 0.76 for 5g, and 1.06 for 2.5g. Relative aerosol generation of cadmium chloride to sodium chloride was the highest in 10g. Efficiency increases of 24.50% for 5g NaCl, 14.91 % for 2.5g NaCl, and 16.48% for 2.5g CdCl₂ with respect to theoretical efficiency were observed but 0.04% efficiency decrease was observed in 5g CdC₂. According to the modifications of source temperature(20, 50, 70℃) and inlet-duct band temperature(20, 50, 100, 150, 200℃), aerosol generation results for NaCl and CdCl₂ were as followings: CPM trends for each quantity excepting 10g NaCl in inlet-duct band temperature 200℃ were similar, and the highest CPM was observed in source temperature 70℃ to each inlet-duct band temperature. The highest CPMs to 10, 5, and 2.5g NaCl were observed in source temperature 70℃ and inlet-duct band temperature 20℃. Aerosol generation of cadmium chloride was increased with the higher source temperature, excepting inlet-duct band temperature 200℃. The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this trend was similar to NaCl aerosol generation The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this result was similar to NaCl aerosol generation. Observed efficiencies of 5 and 2.5g NaCl were similar to ifs theoretical efficiency but -3.08% efficiency decrease of 5g CdCl₂, 17.47% efficiency increase of 2.5g CdCl₂ were observed. CPM ratio of CdCl₂/NaCl of 10g was different to 5 and 2.5g, and 2.5g ratio was higher than 5g ratio. In conclusion, to get maximum aerosol generation for NaCl and CdCl₂ will be the conditions that set the appropriate inlet-duct band temperature for each materials and increase the source temperature. Sodium chloride can be used to evaluate the performance and predict the concentration for cadmium aerosol in aerosol generator and inhalation exposure system.

• Toxicological Research
• /
• v.31 no.4
• /
• pp.393-402
• /
• 2015

This study was conducted to measure toxicity of 1-chloropropane (CAS No. : 540-54-5). According to the OECD Test Guideline 413 (Subchronic inhalation toxicity: 90-day study), SD rats were exposed to 0, 310, 1,250, and 5,000 ppm of 1-chloropropane for 6 h/day, 5 day/week for 13 weeks via whole-body inhalation. Mortality, clinical signs, body weights, food consumption, motor activity, ophthalmoscopy, hematology, serum chemistry, urinalysis, organ weights, gross and histopathological findings were compared between control and all tested groups. No mortality or remarkable clinical signs were examined during the study. No gross lesions or adverse effects on body weight, food consumption, motor activity, ophthalmoscopy, urinalysis, hematology, organ weights were observed in any of male or female rats in all tested groups. In serum biochemistry, glucose was significantly decreased in males of 1,250 and 5,000 ppm groups compared to control group in dose-dependent relationship. In histopathological examination, vacuolation of acinar cells was observed in pancreas of all male and female groups exposed to 1-chloropropane. In conclusion, no observable adverse effect level (NOAEL) was considered to be below 310 ppm/6 h/day, 5 day/week for rats.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.2
• /
• pp.373-379
• /
• 2002

This paper was the design of aerosol generator for inhalation toxicology study of lead and evaluation with real time monitoring, and applied several engineering methodology to classical aerosol generator to cope with it's disadvantages. According to the testing conditions, source temperature 50℃ and inlet-duct band heater temperature 150℃, aerosol generation results for sodium chloride and lead acetate were as followings: CPM(Count Per Minute) for Sodium chloride that used for the testing material in aerosol generation and inhalation system was decreased in the 2nd and the 3rd hour's serial trials, but CVs(coefficient of variation) were maintained within 10%. CPMs for 5 and 2.5 gram of lead acetate that used for aerosol generation and inhalation exposure of lead showed similar results because of the sedimentation of lead acetate on piezoelectric crystal with time. For that reason, heating and mixing of nebulizing solution will be needed to generate lead aerosol with stable profile and maximum generation efficiency. Fluctuations of 10 and 5 gram lead acetate were low but 2.5gram was high. However, CVs for 10, 5, and 2.5gram lead acetate were within 10%. Considering the theoretical efficiencies for sodium chloride and lead acetate, 5gram sodium chloride and 2.5gram lead acetate were appropriate choice. Aerosol generation characteristics for two materials with 1 hour interval were different with respect to the fluctuation of CPM and the decrease to 10gram in it's material. For that reason, sodium chloride can not be used to estimate the aerosol generation and it's related parts for lead acetate. According to the testing conditions, source temperature 20, 50, 70℃, and inlet-duct band heater temperature 20, 50, 100, 150, 200℃, aerosol generation results for sodium chloride and lead acetate were as followings: Excluding inlet-duct band temperature 200℃, maximum CPM for sodium chloride was manifested in source temperature 70℃ with each inlet-duct band temperature conditions. We suggest that this condition was the optimum in the design of aerosol generator, inhalation system, and the testing. Maximum CPMs for 10, 5, and 2.5gram sodium chloride were from source temperature 70℃ and inlet-duct band temperature 20℃. Excluding inlet-duct band temperature 50, 200℃, maximum CPMs for lead acetate were indicated in source temperature 50℃ with each inlet-duct band temperature conditions. We suggest that this condition was the optimum in the design of aerosol generator, inhalation system, and the testing for lead inhalation study. Source and inlet-duct band temperatures for 10, 5, 2.5gram lead acetate were 50 and 100℃, 50 and 100℃, 50 and 150℃, respectively. In conclusion, considering above 2 paragraphs of results for aerosol generation, 5gram efficiencies for sodium chloride, lead acetate were higher than 2.5gram's. If inlet-duct band temperature was same, aerosol generation was increased with increase of source temperature. To get maximum aerosol generation will be the conditions that set the appropriate inlet-duel band temperature for each materials and increase the source temperature.

• Environmental Analysis Health and Toxicology
• /
• v.14 no.4
• /
• pp.203-216
• /
• 1999

This paper describes a set of multi-pathway models for estimating health risk to lead. The models link concentrations of an environmental contaminant (lead) in air, water and food to human exposure through inhalation, ingestion, and dietary routes. Exposure is used as the foundation for predicting risk of health detriment within the population. The process of estimating exposure using often limited data and extrapolating to a large diverse population requires many assumption, inferences, and simplification. This paper is divided into four section. The first section provides lead contaminant levels on obtaining environmental concentration of air, tap water, and foods. The second section provides a discussion of exposure parameters and uncertainty associated predicting human health risk of contaminants. The third and fourth section illustrate lifetime average daily exposure (LADE) and excess cancer risk (ECR) based on exposure parameters. The relationship between concentration of lead in an environmental medium and human exposure is determined with pathway exposure factors (PEFs). The calculation of LADE and ECR is carried out using Monte-Carlo simulation with probability density function of exposure parameters. Examination of the result reveals that, for lead exposure, ingestion (food) is the dominant route of exposure rather than inhalation (air), and ingestion (tap eater).

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2002.05a
• /
• pp.135-135
• /
• 2002

Nowadays a huge variety of products that aim to assist to quit smoking or reduce addictive symptoms are developed and manufactured with safety evaluation, but the safety of the most recent products of interest which do not contain tobacco and nicotine, and shape cigarettes is not evaluated and guaranteed relatively.(omitted)

• Environmental Analysis Health and Toxicology
• /
• v.18 no.4
• /
• pp.255-269
• /
• 2003

The objective of this study was to estimate human exposure to benzo (a)pyrene through multimedia/multi-pathway exposure scenario. The human exposure scenario for benzo(a)pyrene was consisted of 12 multiple exposure pathways, and the multipathway human exposure model based on this scenario constituted. In this study, the multipathway human exposure model was used to estimate the concentrations in the exposure contact media, human intake factors and lifetime average daily dose (LAD $D_{model}$) of benzo(a)pyrene in the environment. Sensitivity analysis was performed to identify the important parameters and Monte-Carlo simulation was undertaken to examine the uncertainty of the model. The total LAD $D_{model}$ was estimated to be 5.52${\times}$10$^{-7}$ mg/kg-day (2.06${\times}$10$^{-7}$ -8.65${\times}$10$^{-7}$ mg/kg-day) using the multipathway human exposure model. The inhalation dose accounted for 78% of the total LADD, whereas ingestion and dermal contact intake accounted for 20.2% and 1.8% of the total exposure, respectively. Based on the sensitivity analysis, the most significant contributing input parameter was benzo (a)pyrene concentration of ambient air. Consequently, exposure via inhalation in outdoor/indoor air was the highest compared with the exposure via other medium/pathways.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.2 no.1
• /
• pp.20-22
• /
• 2004

Acute mercury inhalation poisoning is a rare cause of acute peripheral neuropathy. A 44-year-old female inhaled the fume from heating mercury to treat her palmar dermatitis. For 4 days, this procedure was done for 2-3 minutes after each meal. She subsequently complained flu like symptoms, such as headache, toothache, myalgia and arthralgia. She was admitted for 9 days and then symptoms disappeared. About 3 weeks after exposure, both knee pain developed and then she could not walk. To treat mercury intoxication, she was referred to our hospital. At that time, initial laboratory data were within normal limits, but blood and urinary mercury level were 5.6 11$\mu$g/dl, 132.8 $\mu$g/L. After treatment with D-penicillamine for 7 days, blood and urinary mercury level were 3.9 1$\mu$g/dl, 177.3 $\mu$g/L. During the following 1 month, both leg symptoms remained. Nerve conduction studies were performed, both leg sensory nerve amplitude decreased. These findings were suggestive of peripheral polyneuropathy.

• Toxicological Research
• /
• v.20 no.3
• /
• pp.273-280
• /
• 2004

The present study was carried out to investigate the potential toxicity of dimethyl disulfide by a 2-week inhalation in F344 rats. The test article, dimethyl disulfide, was exposed by inhalation to male and female rats at dose levels of 0, 33, 100, or 300 ppm/6 hrs/day for 2 weeks. At the end of treatment period, all males and females were sacrificed. During the test period, clinical signs, mortality, body weights, food consumption, hematology, serum biochemistry, and gross findings were examined. The mean body weights of the male 300 ppm group and the female 33 ppm or higher dose groups were significantly lower than those of the control group, respectively. The mean food consumption at male 300 ppm and female 100 and 300 ppm were significantly decreased compared with the controls. Some treatment-related serum biochemical changes, including decreased alkaline phosphatase at male 300 ppm and female 100 and 300 ppm, reduced total bilirubin at male 300 ppm, and decreased alanine aminotransferase at female 300 ppm, were observed in a dose-dependent manner, but these findings were considered to be of no toxicological significance. There were no adverse effects on mortality, clinical signs, hematology, and necropsy findings in any treatment group. Based on these results, it was concluded that the 2-week repeated dose of dimethyl disulfide by inhalation resulted in suppressed body weight gain and decreased food consumption at the dose of male 300 ppm and suppressed or reduced body weight gain and decreased food consumption at the dose of female 33 ppm or higher. In the present experimental conditions, the no-observed-adverse-effect level (NOAEL) was considered to be 100 ppm/6 hrs/day for male rats and below 33 ppm/6 hrs/day for female rats.