• 제목/요약/키워드: Infrared sensing

검색결과 477건 처리시간 0.024초

복사전달모의를 통한 중적외 파장역의 민감도 분석 및 지표면온도 산출 가능성 평가 (Evaluation of Sensitivity and Retrieval Possibility of Land Surface Temperature in the Mid-infrared Wavelength through Radiative Transfer Simulation)

  • 최윤영;서명석;차동환;서두천
    • 대한원격탐사학회지
    • /
    • 제38권6_1호
    • /
    • pp.1423-1444
    • /
    • 2022
  • 본 연구에서는 대기 및 지표면 인자들에 대한 중적외 파장역의 복사휘도의 민감도를 복사전달모델인 MODerate resolution atmospheric TRANsmission (MODTRAN)6을 이용하여 분석하고 이를 이용하여 야간에 중적외 파장역 만을 이용한 지표면온도 산출 가능성을 평가하였다. 이를 기반으로 야간에 대해 다양한 조건을 반영한 지표면온도 산출식을 개발하고 처방 온도 자료와 현장 관측 자료를 이용하여 개발된 지표면온도 산출식의 수준을 평가하였다. 중적외 파장역을 활용한 위성 원격탐사에 주로 영향을 미치는 대기연직구조, 이산화탄소와 오존, 지표면온도의 일 변동, 지표면 방출률 그리고 위성의 관측각에 대해 민감도 실험을 실시하였다. 이때 분리대기창 기법 활용 가능성을 평가하기 위해 중적외 파장역을 투과율을 근거로 2개의 밴드로 분리한 후 민감도를 분석한 결과 밴드와 관계없이 대기연직구조에 가장 큰 영향을 받으며 지표면 방출률, 지표면온도의 일 변동, 위성의 관측각 순으로 영향을 받았다. 주요 변인 실험 모두에서 대기의 창에 해당되는 밴드 1은 민감도가 낮은 반면 오존과 수증기 흡수가 포함된 밴드 2에서는 민감도가 높아서 분리대기창 기법을 활용하여 지표면온도 산출이 가능할 것으로 판단하였다. 중적외 2개 밴드와 다양한 변인들을 이용하여 개발된 지표면온도 산출식은 복사모의 시 입력된 기준 지표면온도와 상관계수, 편의 그리고 root mean squared error (RMSE)가 각각 0.999, 0.023K과 0.437K의 수준을 보였다. 또한 26개의 현장관측 지표면온도 자료로 검증한 결과 상관계수는 0.993, 편의는 1.875K, RMSE는 2.079K을 보였다. 본 연구의 결과는 대기 및 지표면 조건이 야간의 중적외 두 밴드에 미치는 영향이 다른 특성을 이용하여 지표면온도를 산출할 수 있음을 제시한다. 따라서 향후에는 중적외 파장역 센서를 탑재한 위성자료를 이용하여 지표면온도를 산출하고 그 수준을 평가해 볼 필요가 있다.

Topography in intertidal zone by satellite images

  • Kang, Yong-Q.
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.664-669
    • /
    • 2002
  • Intertidal zone (tidal flat) is a place which is sometimes dry and sometimes wet depending on the tidal rhythm. Direct measurement of topography in the intertidal zone is very difficult to be achieved. The interface between wet and dry parts in the tidal flat, which can be identified from near infrared band of satellite image, is a 'depth contour' which corresponds to the sea level at the time of satellite pass. Aquisition of topography data in tidal flat is possible by combining various techniques such as (1) identification of the interface between wet and dry parts, (2) GCP correction of satellite image, and (3) realtime prediction of sea level elevation at the time of satellite pass. The algorithm was successfully applied in obtaining topography (bathymetry) data in the intertidal zone of Asan Bay in the west coast of Korea from 26 satellite images. The method is expected to be very efficient in making bathymetry data base in the western and southern parts of Korea where tidal flats are well developed in wide regions.

  • PDF

인체감지를 통한 에너지절약 시스템 개발 (Energy Saving System Based on the Human Sensing Technique)

  • 이종필;지평식;신관우;임재윤
    • 전기학회논문지P
    • /
    • 제53권4호
    • /
    • pp.205-209
    • /
    • 2004
  • This research is investigated an energy saving system based on human detecting technique. It saves a lot of energy by automatic switching method of lighting, appliance, and so on. Existence of people on space is detected by infrared ray sensor. If there is not anybody during definite time, then main controller of system sends "power off" signal to lighting switches, and outlets. When people are detected again, turn on lighting switches and outlets. Result of this research is adaptable for classrooms and offices, and great effect of energy saving is expected.

ONE TYPE OF EDDY DEVELOPMENT IN THE NORTHEASTERN KUROSHIO BRANCH

  • Bulatov, Nafanail V.;Kapshiter, Alexander V.;Obukhova, Natalya G.
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
    • /
    • pp.926-929
    • /
    • 2006
  • Some features of vertical structure of the frontal interaction zone of the warm Kuroshio Current and cold Oyashio Current are known from 1930 from analysis of ship data. Ship data however do not allow carrying out the area detailed survey opposite to satellite infrared (IR) observations which possess by high spatial and temporal resolution. Analysis of NOAA AVHRR IR images demonstrated that process of formation and development of the Kuroshio warm core rings is highly complex. They are formed as a result of development of anticyclonic meanders of the warm Kuroshio waters and spin off them from the current. Joint analysis of thermal infrared images and altimetry data has also indicated that interaction of eddies to the frontal zone plays a crucial role in formation of large eddies moving to the Southern Kuril region.

  • PDF

초분광 분해기의 광학계 설계 및 영상 처리 (Optical System Design and Image Processing for Hyperspectral Imaging Systems)

  • 허아영;최승원;이재훈;김태형;박동조
    • 한국군사과학기술학회지
    • /
    • 제13권2호
    • /
    • pp.328-335
    • /
    • 2010
  • A hyperspectral imaging spectrometer has shown significant advantages in performance over other existing ones for remote sensing applications. It can collect hundreds of narrow, adjacent spectral bands for each image, which provides a wealth of information on unique spectral characteristics of objects. We have developed a compact hyperspectral imaging system that successively shows high spatial and spectral resolutions and fast data processing performance. In this paper, we present an overview of the hyperspectral imaging system including the strucure of geometrical optics and several image processing schemes such as wavelength calibration and noise reduction for image data on Visible and Near-Infrared(VNIR) and Shortwave-Infrared(SWIR) band.

MEMS 기반의 IR $CO_2$ 센서 제작 및 특성 평가 (A Fabrication of IR $CO_2$ Sensor based on the MEMS and Characteristic Evaluation)

  • 김신근;한용희;문성욱
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제54권5호
    • /
    • pp.232-237
    • /
    • 2005
  • In this paper, we fabricated $CO_2$ gas sensor based on the MEMS infrared sensor and characterized its electrical and $CO_2$-sensing properties. The fabricated $CO_2$ gas sensor by MEMS technique has many advanges over NDIR(nondispersive) $CO_2$ sensor such as monolithic fabrication, very high selectivity on $CO_2$, low power consumption and compact system. Microbolometer by surface micromachining was fabricated for gas detector and $CO_2$ filter chip by bulk micromachining was fabricated for signal referencing. By using the proposed and fabricated gas sensor, we are expected to measure $CO_2$ concentration more accurately with high reliability.

Observation of Spatial and temporal variability of sea skin surface temperature by a Thermal Infrared Camera

  • Tamba, Sumio;Yokoyama, Ryuzo;Parkes, Isabelle;David, Llewellyn-Jones
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.14-19
    • /
    • 1998
  • The MUBEX (MUtsu Bay sea surface temperature validation EXperiment) campaign has been held from 1995 to 1997 in summer. During the MUBEX campaign, a thermal infrared camera (TIC) installed on a research vessel, which was also equipped with other various observation devices, was intensively used to observe microscopic structure of sea skin surface temperature (SSST) behavior. We have now a total number of 500,000 images observed by the TIC under various weather conditions, i.e., very calm or wavy sea condition, and clear, patchy or cloudy sky condition. In this paper, we show typical SSST patterns observed by the TIC, and describe the result of statistical analysis of SSST.

  • PDF

Investigation of sea skin surface effects and sea surface emissivity effects based on thermal infrared camera image

  • Tamba, Sumio;Yoshimori, Kyu;Inomata, Kazuya
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.657-662
    • /
    • 2002
  • Sea surface temperatures (SSTs) estimated from satellite data are affected by various kinds of disturbance factors. In order to accurately estimate SSTs based on radiometric data observed by satellite, it is important to correct the effects by these disturbance factors. We obtained a huge data set of skin sea surface temperature images observed by a thermal infrared camera (TIC) in MUBEX Campaign. TIC installed on an observation vessel recorded sea surface skin temperature distribution under various weather conditions. Based on some special images observed by TIC, we estimated skin effects and effective sea surface emissivity. In this paper, we report the methods and results of these estimations.

  • PDF

MOSAICFUSION: MERGING MODALITIES WITH PARTIAL DIFFERENTIAL EQUATION AND DISCRETE COSINE TRANSFORMATION

  • GARGI TRIVEDI;RAJESH SANGHAVI
    • Journal of Applied and Pure Mathematics
    • /
    • 제5권5_6호
    • /
    • pp.389-406
    • /
    • 2023
  • In the pursuit of enhancing image fusion techniques, this research presents a novel approach for fusing multimodal images, specifically infrared (IR) and visible (VIS) images, utilizing a combination of partial differential equations (PDE) and discrete cosine transformation (DCT). The proposed method seeks to leverage the thermal and structural information provided by IR imaging and the fine-grained details offered by VIS imaging create composite images that are superior in quality and informativeness. Through a meticulous fusion process, which involves PDE-guided fusion, DCT component selection, and weighted combination, the methodology aims to strike a balance that optimally preserves essential features and minimizes artifacts. Rigorous evaluations, both objective and subjective, are conducted to validate the effectiveness of the approach. This research contributes to the ongoing advancement of multimodal image fusion, addressing applications in fields like medical imaging, surveillance, and remote sensing, where the marriage of IR and VIS data is of paramount importance.

초전형 적외선 센서용 PbTiO3/P(VDF/TrFE) 박막의 제조 및 특성 (Fabrication and characteristics PbTiO3/P(VDF/TrFE) thin films for pyroelectric infrared sensor)

  • 권성열
    • 센서학회지
    • /
    • 제12권1호
    • /
    • pp.10-15
    • /
    • 2003
  • 초전형 적외선 센서의 감지물질로 사용하기 위해 $PbTiO_3$/P(VDF/TrFE) 복합재료 박막을 스핀코팅방법을 사용하여 제작하였다. 시료는 65 wt% VDF와 35 wt% TrFE의 함량 P(VDF/TrFE) 분말을 사용하였으며 세라믹-고분자 복합재료를 제조하기 위하여 사용된 세라믹은 $PbTiO_3$ 분말을 사용하였다. 제조된 복합재료의 P(VDF/TrFE)와 $PbTiO_3$의 결합성을 확인하기 위해 제조된 박막의 표면은 SEM을 통해 관찰하였고 복합재료의 커패시턴스와 비유전율, 유전손실은 임피던스 분석기 (HP4192A)로 측정하였으며, 복합재료의 초전계수는 반도체 파라미터 분석기(HP4145B)로 조사하였다.