• Composites Research
• /
• v.29 no.4
• /
• pp.167-172
• /
• 2016

$Co_9S_8/reduced$ graphene (CSRG) has been prepared by a facile two step hydrothermal method and used as a supercapacitor electrode material. It is anticipated that the $Co_9S_8$ and reduced graphene oxide (RGO) would serve as a spacer material to each other to stop the agglomeration and simultaneous contribution of electrical double layer capacitance (RGO) and pseudocapacitance ($Co_9S_8$) would provide high electrochemical properties. The chemical analysis has been done by Fourier transform infrared spectroscopy and the morphology is characterised by field emission scanning electron microscopy. CSRG shows a high electrical conductivity of $98S\;m^{-1}$. The symmetric supercapacitor shows a specific capacitance of ${\sim}728F\;g^{-1}$ with a current density of $2A\;g^{-1}$. CSRG also showed an energy density of $25.2Wh\;kg^{-1}$ with a power density of $1000W\;kg^{-1}$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.2
• /
• pp.168-177
• /
• 2015

Shell waste from the butter clam Saxidomus purpuratus and littleneck clam Ruditapes philippinarum is a large by-product of shellfish aquaculture, and it is desirable to convert it into value-added products for industrial applications. In this study, calcium carbonate (CaC) polymorphs from butter clam (BCSP) and littleneck clam (LCSP) shell powders and commercial CaC were characterized using Fourier transmission infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results revealed that the optimal calcination conditions to eliminate organic substances and improve solubility for both BCSP and LCSP were $800^{\circ}C$ for 8 h in an electrical furnace. Calcination improved the white index of the butter clam (BCCP) and littleneck clam (LCCP) calcined powder compared with shell powders. The calcium content in BCCP (51.1%) was higher than that of LCCP (44.9%) or commercial calcium oxide (CaO, 44.7%). The XRD patterns of BCCP and LCCP were similar to that of CaO. Cubic-like crystals of CaC and irregular crystals of BCCP and LCCP were observed by SEM. The FT-IR and XRD analyses revealed the presence of calcite and aragonite in the BCSP and aragonite in the LCSP, whereas the CaC contained calcite. These results indicate that butter and littleneck clam shells are potential biomass resources for calcium carbonate and calcium oxide.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.97-102
• /
• 2018

In this work, the surface of gold nanoparticles (AuNPs) was modified with small molecules including mercaptoundecanoic acid (MUA) and L-lysine for the development of highly sensitive lateral flow (LF) sensors. Uniformly sized AuNps were synthesized by a modified Turkevich-Frens method, showing an average size of $16.7{\pm}2.1nm$. Functionalized AuNPs were then characterized by transmission electron microscopy, UV-vis spectroscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. The stable conjugation of AuNPs and antibodies was obtained at pH 7.07 and the antibody concentration of $10{\mu}g/mL$. The functionalized AuNP-based LF sensor exhibited lower detection limit of 10 ng/mL for hepatitis B surface antigens than that of using the bare AuNP-based LF sensor (100 ng/mL).

• Advances in environmental research
• /
• v.6 no.2
• /
• pp.113-125
• /
• 2017

Santa Barbara Amorphous-15(SBA-15) nanoparticles were utilized as the inexpensive and effective adsorbents to remove methylene blue dye from the aqueous solution.SBA-15 was created by Zhao et al method. Infrared spectroscopy, X-ray diffraction and scanning electron microscopy (SEM) were used for the evaluated physical properties of SBA-15. The results of diffraction X-ray indicated that was the crystalline structure for it. Also IR spectroscopy indicated was a silica the whole structure of the groups and SEM image verify the structure of relatively identical particles size of SBA-15. Factors affecting adsorption including the amounts of adsorbent, pH and contact time were investigated by a SBA-15 nanomaterial design. The extent of dye removal enhanced with increasing initial dye concentration and pH from 4 to 10. The higher percentage adsorption were obtained under optimum conditions of variables (sorbent dose of 200 mg/liter, initial MB concentration 10 mg/liter, initial pH of 10 and temperature of $25^{\circ}C$). Maximum adsorption happened after the 2 hour and the kinetic processes of the dyes adsorption were described by applying the pseudo-first-order and the pseudo-second-order and the relatively High correlation with the kinetic Ellovich models. It was found that the pseudo-second-order models kinetic equation described the data of dye adsorption with a good correlation (R2>0.999) which indicated chemisorption mechanism. Freundlich and Langmuir adsorption models were investigated in conditions of variables (adsorbent dose 0.01 gr/liter, MB concentration 10, 20, 30 mg/liter, pH of 4, 7, 10, contact time 90 min and temperature of $27^{\circ}C$). The adsorption data were represented by Langmuir isotherm model. These values are higher than the adsorption capacities of some other adsorbents that have recently been published in the literature.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.9
• /
• pp.3753-3758
• /
• 2015

Background: Polymeric nanoparticles are attractive materials that have been widely used in medicine for drug delivery, with therapeutic applications. In our study, polymeric nanoparticles and the anticancer drug, chrysin, were encapsulated into poly (D, L-lactic-co-glycolic acid) poly (ethylene glycol) (PLGA-PEG) nanoparticles for local treatment. Materials and Methods: PLGA: PEG triblock copolymers were synthesized by ring-opening polymerization of D, L-lactide and glycolide as an initiator. The bulk properties of these copolymers were characterized using 1H nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy. In addition, the resulting particles were characterized by scanning electron microscopy. Results: The chrysin encapsulation efficiency achieved for polymeric nanoparticles was 70% control of release kinetics. The cytotoxicity of different concentration of pure chrysin and chrysin loaded in PLGA-PEG ($5-640{\mu}M$) on T47-D breast cancer cell line was analyzed by MTT-assay. Conclusions: There is potential for use of these nanoparticles for biomedical applications. Future work should include in vivo investigation of the targeting capability and effectiveness of these nanoparticles in the treatment of breast cancer.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2505-2511
• /
• 2014

Indium oxide nanocrystals ($In_2O_3$ NCs) with sizes of 5.5 nm-10 nm were synthesized by hot injection of the mixture precursors, indium acetate and oleic acid, into alcohol solution (1-octadecanol and 1-octadecence mixture). Field emission transmission electron microscopy (FE-TEM), High resolution X-Ray diffraction (X-ray), Nuclear magnetic resonance (NMR), and Fourier transform infrared spectroscopy (FT-IR) were employed to investigate the size, surface molecular structure, and crystallinity of the synthesized $In_2O_3$ NCs. When covered by oleic acid as a capping group, the $In_2O_3$ NCs had a high crystallinity with a cubic structure, demonstrating a narrow size distribution. A high mobility of $2.51cm^2/V{\cdot}s$ and an on/off current ratio of about $1.0{\times}10^3$ were observed with an $In_2O_3$ NCs thin film transistor (TFT) device, where the channel layer of $In_2O_3$ NCs thin films were formed by a solution process of spin coating, cured at a relatively low temperature, $350^{\circ}C$. A size-dependent, non-monotonic trend on electron mobility was distinctly observed: the electron mobility increased from $0.43cm^2/V{\cdot}s$ for NCs with a 5.5 nm diameter to $2.51cm^2/V{\cdot}s$ for NCs with a diameter of 7.1 nm, and then decreased for NCs larger than 7.1 nm. This phenomenon is clearly explained by the combination of a smaller number of hops, a decrease in charging energy, and a decrease in electronic coupling with the increasing NC size, where the crossover diameter is estimated to be 7.1 nm. The decrease in electronic coupling proved to be the decisive factor giving rise to the decrease in the mobility associated with increasing size in the larger NCs above the crossover diameter.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2487-2493
• /
• 2014

Dimeric ${\beta}$-cyclodextrin linked by a thioether bridge was synthesized from a reaction of mono-6-iodo-6-deoxy-${\beta}$-cyclodextrin with sodium sulfide, and the structure was analyzed using nuclear magnetic resonance spectroscopy and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The effects of thioether-bridged dimeric ${\beta}$-CD on the aqueous solubility of flavonols (myricetin, quercetin, and kaempferol) were investigated by ultraviolet-visible spectroscopy. The aqueous solubility of myricetin, quercetin, and kaempferol were enhanced 33.6-, 12.4-, and 10.5-fold following the addition of 9 mM of thioether-bridged dimeric ${\beta}$-CD. In comparison, the aqueous solubility of myricetin, quercetin, and kaempferol were enhanced 5.4-, 3.3-, and 2.7-fold using the same concentration of monomeric ${\beta}$-cyclodextrin. Furthermore, the formation of flavonol/thioether-bridged dimeric ${\beta}$-CD inclusion complexes was confirmed with nuclear magnetic resonance, Fourier-transform infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy. The results showed that the nature of the complexes significantly differed from that of free flavonols. Herein, we suggest that the thioether-bridged dimeric ${\beta}$-CD can act as an effective complexing agent for flavonols.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.411-415
• /
• 2020

In this article, the preparation of hydrogels containing conducting polymer@lignin hybrids and their application to sensing materials were demonstrated using diverse techniques. A conducting polymer, polypyrrole (PPy) was polymerized on the surface of lignin and successful formation was analyzed with Fourier-transform infrared spectroscopy and scanning electron microscopy. Subsequently, PPy@lignin hybrids were mixed with a hydrogel matrix to obtain a conductive hydrogel. The feasibility of using the hydrogel as a sensing material was shown by obtaining reasonable sensing signals using various electrical measurements when adding solvents and solutions to the sensor system. The significance of sensor signals was confirmed with complementary experiments. This study shows that the hydrogel containing the PPy@lignin could be used for sensor applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.204-204
• /
• 1999

The plasma source ion implantation(PSII) technique which is a method using high negative voltage pulse in plasma system has the potential to change the surface properties of polymer. PSII technique increase the surface free energy by introducing polar functional groups on the surface so that it improves reactivity, hydrophilicity, adhension, biocompatability, etc. However, the mobility of polymer chains enables the modified surface layers to adapt their composition to interfacial force. This hydrophobic recovery interrupts the stability of modified surfaces to keep for the long time. In this study, poly(methyl methacrylate)(PMMA), poly(2-hydroxyethyl methacrylate)(PHEMA), and polu(2-hydroxypropyl methacylate)(PHPMA) for contact lens application, were modified to improve the wettability with PSII technique and were investigated the surface stabilities. Polymer film was prepared with solution casting(3 wt.% solution) and was annealed at 11$0^{\circ}C$ under vacuum oven to remove solvent completely and to eliminate physical ageing. The thickness of the film measured by scanning electron microscopy (SEM) and surface profilometer was about 10${\mu}{\textrm}{m}$. Polymers were treated with different kinds of gases, pulse frequency, pulse with, pulse voltage, and treatment time. Even though PMMA, PHEMA, and PHPMA have similar repeat unit structure, the optimal treatment conditions and the tendency to hydrophobic recovery were different. PHPMA, more hydrophilic polymer than PMMA and PHEMA showd better wettability and stability after mild treatment. Surface tensions were obtained by water and diiodomethane contact angle measurements to monitor the relation between hydrophobic recovery and polymer structure. Different ion species in plasma change the polar component and dispersion component of polymer surface. For better wettability surface, the increase of polar component was a dominant factor. We also characterized modified polymer surfaces using x-ray photoelectron spectroscopy(XPS), secondary ion mass spectrometry(SIMS), Fourier Transform infrared spectroscopy(FT-IR), and SEM.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.4
• /
• pp.436-444
• /
• 2016

Clamshells, which comprise more than 50% of a clam’s weight, are a major byproduct of the clam industry and are mainly composed of insoluble calcium carbonate. This study investigates the use of clamshells as a natural calcium resource. Highly soluble powdered calcium lactate (LCCL) was prepared from the calcined powdered shells of littleneck clams (LCCP) using response surface methodology (RSM) to predict optimum conditions. These conditions, as derived from pH, solubility, and yield of 11 LCCLs manufactured according to the RSM model, were 1.80 M lactic acid and 1.13 M LCCP. The actual values of pH (6.98), solubility (93.99%), and yield (351.23%) under the optimized conditions were as predicted. The derived LCCL exhibited a strong buffering capacity in the range of pH 2.78-3.90 when combined with less than 2 mL of 1 N HCl. The ranges of calcium content and solubility of LCCL were 7.7-17.5 g/100 g and 96.6-98.9%, respectively. Fourier transform infrared spectroscopy (FT-IR) of the LCCL identified it as calcium lactate pentahydrate, and field emission scanning electron microscopy (FESEM) revealed an irregular and rod-like microstructure. These results confirm the potential use of clamshells, converted to highly soluble organic acid calcium, as an additive to enhance calcium content in food ingredients.