• 대한간호학회지
• /
• 제43권6호
• /
• pp.746-759
• /
• 2013

Purpose: Infrared thermometers are increasingly used as a convenient, non-invasive assessment method for febrile children. However, the diagnostic accuracy of the infrared thermometer for children has been questioned, particularly in relation to sensitivity and specificity. The aim of this study was to evaluate diagnostic accuracy of infrared thermometers in febrile children. Methods: Articles published between 1966 and 2012 from periodicals indexed in the Ovid Medline, Embase, CINAHL, Cochrane, KoreaMed, NDSL, KERIS and other databases were selected, using the following keywords: 'infrared thermometer'. The QUADAS-II was applied to assess the internal validity of the diagnostic studies. Selected studies were analyzed using meta-analysis with MetaDisc 1.4. Results: Nineteen diagnostic studies with high methodological quality, involving 4,304 children, were included. The results of meta-analysis showed that the pooled sensitivity, specificity and AUC (Area Under the Curve) of infrared tympanic thermometers in children over 1 year were 0.80 (95% CI 0.78, 0.81), 0.94 (95% CI 0.93, 0.95) and 0.95 respectively. However the diagnostic accuracy of infrared tympanic thermometers in children with hyperthermia was low. Conclusion: The diagnostic accuracy of infrared tympanic thermometer was similar to axillary and rectal thermometers indicating a need for further research to substantiate these findings in children with hyperthermia.

• Design & Manufacturing
• /
• 제16권1호
• /
• pp.1-8
• /
• 2022

The importance of fast and accurate body temperature measurement with a portable thermometer is increasing. In order to reduce the temperature measurement response time of the infrared ear thermometer, it is very important to develop a structure for a thermometer having an efficient heat transfer path. Most of the existing ear thermometers are single structures that do not consider thermal efficiency, which may delay measurement time and reduce measurement accuracy. Therefore, in this study, the upper part of the thermometer in contact with the ear is made of a thermally conductive material, and the lower part of the thermometer is made of a thermal barrier material so that heat can be concentrated on the infrared sensor of the thermometer by blocking the upper part of the heat. For the efficiency of production, it was intended to be manufactured through the double injection process, and for this purpose, in this paper, the optimal process parameters were derived through the double injection process analysis.

• 한국정밀공학회지
• /
• 제12권7호
• /
• pp.46-52
• /
• 1995

This paper proposes methodologies for the development of radiation thermometer using InSb photo-detector of which spectral sensitivity is excellent over the wave length range of 2 .mu. m .approx. 5 .mu. m. The proposed radiation thermometer has broad measurement range from normal to high, up to more than 1000 .deg. C, with high accuracy, and can measure temperature on the material surface or heat emission noncontactely with high speed. Optical system was consisted of two convex lens with foruslength of 15.2mm for infrared lay focusing, Ge filter to cut the short wave length components and sapphire filter to cut the long wave length components. The cold shielded was installed in the whole surface of the light-absorbing element to remove the error- mometer, calibration using black body furnace which has temperature range of 90 .deg. C .approx. 1100 .deg. C was carried out, and temperature calaibration curve was obtained by exponential function curvefitting. The result shows maximum error less than 0.24%(640K .+-. 1.6K) over the measurement range of 90 .deg. C .approx. 700 .deg. C, and from this result the usefulness of the developed thermometer has been confirmed.

• 한국광학회지
• /
• 제21권4호
• /
• pp.133-138
• /
• 2010

모든 복사온도계는 복사원 크기효과(Size-of-Source Effect, SSE)와 자기복사효과를 가지고 있다. 복사원의 직경에 따른 복사온도계의 검출기 신호세기로 정의된 SSE의 주원인은 회절이기 때문에 파장에 크게 좌우된다. 본 논문에서는 중저온영역에서 복사온도의 전달표준기로 많이 사용되고 있는 TRT2(Transfer Radiation Thermometer 2, HEITRONICS)의 SSE와 자기복사 특성을 측정하였다. 측정한 TRT2의 SSE 값을 사용하여 계산한 결과 흑체의 온도가 $300^{\circ}C$ 일 때, 개구 직경이 60 mm인 흑체와 10 mm인 흑체의 복사온도 차이가 저온모드($8-14\;{\mu}m$)에서 $3.5^{\circ}C$, 중온모드($3.9\;{\mu}m$)에서 $0.5^{\circ}C$인 것을 알 수 있었다. 또한, 복사온도계 몸체 온도가 $2.6^{\circ}C$ 변화했을 때 자기복사효과 때문에 흑체의 복사온도는 110 mK 다르게 측정되었다.

• Clinical and Experimental Pediatrics
• /
• 제48권8호
• /
• pp.820-825
• /
• 2005

목 적 : 감염과 질병상태의 유용한 인자인 열의 존재와 정도를 좀더 손쉽고 정확하게 확인하기 위해, 고막체온계 및 이마체온계의 정확성과 유용성을 평가하고자 하였다. 방 법 : 2004년 1월 1일부터 12월 31일 까지 중앙대학교 부속 병원에 입원하여 치료받았던 환아 중 무작위로 1,050명을 선출하여 대상으로 하였으며, 수은 체온계, 고막 체온계(BRAUN IRT $3020^{(R)}$) 및 이마 체온계(HubDIC $DOTORY^{(R)}$)로 동시에 체온을 측정하였고 이를 비교, 분석하여 상관관계를 조사하였다. 결 과 : 고막 체온계와 이마 체온계의 측정치는 각각 표준 검사인 수은 체온계의 측정치와 유의한 상관관계 및 상호 교환성을 가졌으며, 양측 고막 간, 그리고 고막 체온계와 이마 체온계 사이에서도 유의한 상관관계를 보였다. 발열에 대한 고막 체온계의 민감도는 오른쪽과 왼쪽에서 각각 81.1%, 82.4%였고, 양성 예측률은 각각 81.8%, 73.6%였다. 이마 체온계의 민감도는 83.3%였으며, 양성 예측률은 74.4%였다. 결 론 : 고막 체온계(BRAUN IRT $3020^{(R)}$) 및 이마형 체온계(HubDIC $DOTORY^{(R)}$)가 액와형 수은체온계와 통계적으로 유의한 상관성 및 일치성을 보이며(P<0.05), 또한 발열에 대한 민감도 및 양성 예측률이 매우 높아 일상의 가정에서나 병원에서 진료목적으로, 연구 목적으로 체온 측정하는 데 유용하게 사용될 수 있을 것으로 본다.

• 대한통합의학회지
• /
• 제8권4호
• /
• pp.307-321
• /
• 2020

Purpose : A person infected by SARS-CoV2 may present various symptoms such as fever, pain in lower respiratory tract, and pneumonia. Measuring body temperature is a simple method to screen patients. However, changes in the surrounding environment may cause errors in infrared measurement. Hence, a non-contact thermometer controls this error by setting a correction value, but it is difficult to correct it for all environments. Therefore, we investigate device error values according to changes in the surrounding environment (temperature and humidity) and propose guidelines for reliable patient detection. Methods : For this study, the temperature was measured using three types of non-contact thermometers. For accurate temperature measurement, we used a water bath kept at a constant temperature. During temperature measurement, we ensured that the temperature and humidity were maintained using a thermo-hygrometer. The conditions of the surrounding environment were changed by an air conditioner, humidifier, warmer, and dehumidifier. Results : The temperature of the water bath was measured using a non-contact thermometer kept at various distances ranging from 3~10 cm. The value measured by the non-contact thermometer was then verified using a mercury thermometer, and the difference between the measured temperatures was compared. It was observed that at normal surrounding temperature (24 ℃), there was no difference between the values when the non-contact thermometer was kept at 3 cm. However, as the distance of the non-contact thermometer was increased from the water bath, the recorded temperature was significantly different compared with that of mercury thermometer. Moreover, temperature measurements were conducted at different surrounding temperatures and the results obtained significantly varied from when the thermometer was kept at 3 cm. Additionally, it was observed that the effect on temperature decreases with an increase in humidity Conclusion : In conclusion, non-contact thermometers are lower in lower temperature and dry weather in winter.

• 조명전기설비학회논문지
• /
• 제21권3호
• /
• pp.11-17
• /
• 2007

고제철설비 같은 매우 가혹한 환경 조건에서 뜨거운 철판의 온도를 측정하는 적외선 온도측정시스템을 개발하였다. POSCO 광양제철소 철판 압연공정에서 3개원간의 현장 테스트를 수행하였다. 현장 시운전에서 개발된 시스템의 신뢰성을 확인하였다. A2TPMI 센서의 비선형 방정식을 풀기위해 커브핏 방법을 통해 보정하고, 각 레인지당 $1[^{\circ}C]$이하의 정밀도로 25[msec]처리 속도를 확보하였다. 실험에서는 POSCO에서 받은 시험성적과 USN 기반에서 폴링방식을 통한 트래픽 모니터링을 통해 효과적인 온도감시 시스템임을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제40권4호
• /
• pp.368-372
• /
• 2015

Purpose: The purpose of this study is to verify the feasibility of using an infrared sensor to measure the body temperature of a sow. We first conducted experiments on three pigs by using three infrared sensors and one indoor temperature sensor. Methods: The three infrared sensors were installed inside our model house and were used to take temperature measurements per second of the backs of the pigs. While feeding, the temperatures of the backs of the pigs were measured at distances of 10 cm, 20 cm, and 30 cm from the infrared sensors. Results: We concluded that the relation between the temperature of the pigs' backs and the indoor temperature was y =0.549x + 18.459 at a measuring distance of 30 cm. The relation was y = 0.645x + 15.461 for a distance of 20 cm and y = 0.760x + 11.913 for a distance of 10 cm. We found high correlation between the indoor temperature and the temperature of the pigs' backs. Conclusions: It is possible to use an infrared thermometer to monitor the temperature of pigs' backs. This system seems to be feasible and effective in monitoring pig temperature. The use of an infrared thermometer will also make daily monitoring easy. In later experiments, the possibility of developing a system that can determine if an error can be corrected by using infrared sensor is explored by considering humidity variables.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.172-173
• /
• 2007

As the power density and switching frequency increase, thermal analysis of power electronics system becomes imperative. The thermal analysis provides valuable information on the semiconductor rating, long-term reliability. In this paper, thermal distribution of the Non Punchthrough(NPT) Insulated Gate Bipolar Transistor has been studied. For analysis of thermal distribution, we obtained experimental and simulation results by using finite element simulator, Ansys and by using photographic infrared thermometer, we compared experimental date with simulation result. and got good agreement. Also this paper provided thermal distribution of IGBT connected to heat sinks. and this results will be good information to design optimal heat sink for IGBT.

• 한국광학회지
• /
• 제29권2호
• /
• pp.70-76
• /
• 2018

$0^{\circ}C$ 이하 적외선 복사온도계의 복사온도눈금 교정을 위해 기준 복사온도계 TRT2 (Transfer Radiation Thermometer 2, HEITRONICS)와 온도가변 흑체 ME30 (Model: ME30, HEITRONICS)을 사용하여 비교 교정장치를 구축하였다. 3개의 고정점(Ice ($0.01^{\circ}C$), In ($156.5985^{\circ}C$), Sn ($231.928^{\circ}C$))과 플랑크형 사쿠마-하토리식을 사용하고, $-50^{\circ}C$에서 TRT2의 내외삽 오차를 불확도에 포함시켜 TRT2의 복사온도 눈금을 교정하였다. ME30 흑체 개구에 공압으로 동작되는 뚜껑을 설치한 후 30초 동안만 뚜껑을 열고 복사온도를 측정함으로써 ME30 내에서 생기는 성에를 방지할 수 있었으며 비교 교정에 소요되는 시간도 반으로 줄일 수 있었다. $0{\sim}232^{\circ}C$ 영역 밖으로 벗어날수록 비교 교정장치의 불확도는 증가하며 $-20^{\circ}C$에서 확장 불확도는 0.26 K였다.