• Title/Summary/Keyword: InfraRed

검색결과 484건 처리시간 0.03초

초음속 풍동에서의 IR Thermography 기법을 활용한 시험연구 (Test Research Using an IR Thermography Technique in a Supersonic Wind Tunnel)

  • 김익현;이재호;박기수;변영환;이종국
    • 한국항공우주학회지
    • /
    • 제44권2호
    • /
    • pp.99-107
    • /
    • 2016
  • 본 연구에서는 Infra-Red Thermography(IRT) 기법을 활용한 초음속 풍동시험 시 의도치 않게 발생하는 기술적 문제에 대한 연구를 수행하였으며 이를 방지할 수 있는 방법에 대해 분석하였다. 풍동시험은 마하 3 또는 4의 두 가지 유동조건에서 초고속 비행체 형상을 모사할 수 있는 이중 압축램프 모델로 수행하였다. 획득된 IR 결과를 shadowgraph 가시화 이미지, 수치해석 결과와 비교하였으며 본 IRT 기법을 활용하여 초음속 이중 압축램프에서 발생하는 유동천이, 박리 그리고 3차원 현상에 관한 정성적인 정보를 획득할 수 있음을 확인하였다.

전자식체온계 기준규격 개발 연구 (Research of Developing of Standards for Electronic Thermometers)

  • 김은주;이민정;이병영;박기정;김동섭;이인수;박해대;정희교
    • 대한의용생체공학회:의공학회지
    • /
    • 제31권2호
    • /
    • pp.123-128
    • /
    • 2010
  • The thermometers is widely used in diagnostic medical devices, and the safety and accurate performance of these devices are important in the diagnosis and monitoring of personal health. Especially, the accuracy of infra-red thermometer is highly emphasized. Here two typical thermometers are utilized for this purpose: the electronic thermometers measure body temperature by contacting to subject while infra-red thermometers measure by no contacting to subject. Therefore, the evaluating items of each thermometer are different, and the standard for each temperature is highly needed. But, there have been no international standards of each thermometer such as IEC. In this paper, we developed the standards of electronic and infra-red thermometer based on national standards such as KS, ASTM, EN, JIS and FDA guidance. The new standards focused on the safety and suitable performance for health care. This standards were applied to enact and revise the electronic medical device standards. So it can be applied to evaluate the safety and performance on technical file review. We predict that this standard will improve the quality of diagnostic medical devices (thermometers) and increase the international competitive power of domestic product.

전자·반도체용 스프레이 분사형 세정제에 대한 청정도 평가 (Cleanliness Test by Spray-Type Cleaning Agent for Electronic and Semiconductor Equipment)

  • 허효정;노경호
    • Korean Chemical Engineering Research
    • /
    • 제47권6호
    • /
    • pp.688-694
    • /
    • 2009
  • PCB의 먼지 제거용 세정제로 사용되는 스프레이형 세정제를 선정하여 이에 대한 청정도를 평가하였다. 친환경적인 대체 세정제를 채택하기 위해서는 세정제의 세정성, 환경성, 경제성을 평가하여 체계적인 선정절차에 의거하여 도입 및 적용하여야 한다. 객관적이고 효율적인 세정성 평가방법의 정립이 현시점에서 매우 중요하다. 본 연구에서는 여러 세정성 평가 방법들 중 표면관찰평가법인 SEM-EDX(Scanning Electron Microscopy/Energy-Dispersive X-ray) 분석과 적외선열화상카메라(THERMOVISION A20 model)를 이용하여 청정도를 평가하였다. CT-2770 모델의 사운드카드를 $2{\times}2cm$로 잘라내어 스프레이 세정 전과 후의 청정도를 SEM의 이미지 분석을 통해 관찰할 수 있었고 EDX의 성분분석을 통해 먼지의 제거율을 정량화할 수 있었다. 컴퓨터의 P4T-E 모델의 마더보드와 IPC-A-36 모델의 기판을 사용, 오염물로 먼지와 철가루를 사용하여 열화상카메라로 세정 전, 후의 상온과 $50^{\circ}C$ Oven에 방치된 시간의 차이에 따른 온도의 변화를 비교하였다.

가전제품 통합 제어를 위한 Wi-Fi/IR 게이트웨이 및 스마트폰 애플리케이션 구현 (Implementation on Wi-Fi/IR Gateway and Smartphone Application for Integration and Control of Consumer Appliances)

  • 류원재;채석;신수용;김영형;정동수
    • 한국통신학회논문지
    • /
    • 제42권4호
    • /
    • pp.879-888
    • /
    • 2017
  • 사물 인터넷의 보급으로 인해 스마트홈 서비스 기능을 제공하는 스마트 가전의 보급이 활발하게 이루어지고 있다. 이에 따라 스마트기기로 직접 제어할 수 있는 Wi-Fi 및 Bluetooth가 접목된 제품들이 선호되고 있다. 하지만 현재까지 개발된 가전제품은 IR(InfraRed) 기반의 제품이 많으며, 제품마다 호환되는 프로토콜이 다르다는 문제가 있다. 본 논문에서는 이러한 문제를 해결하기 위하여 스마트폰을 이용하여 스마트 가전 및 기존 가전제품을 제어하기 위한 시스템을 제안하고자 한다. 제안하는 시스템은 Wi-Fi 및 IR 게이트웨이로 스마트폰의 제어명령을 Wi-Fi를 통해 수신하고 이를 IR로 변환하여 기존 가전제품들을 제어하는 역할을 수행하도록 한다. 또한 특정 브랜드의 가전제품이나 특정 스마트폰에서만 지원 가능했던 리모컨기능을 제약 없이 사용가능 하도록 하고, 하나의 가전기기에 하나의 리모컨이 사용되는 한계점을 벗어나 모든 스마트폰을 이용하여 다양한 가전제품을 제어할 수 있도록 하고자 한다.

단결정 MnF2(1.5% EuF3)의 Photoluminescence (Photoluminescence of the Single Crystal MnF2(1.5% EuF3))

  • 권순혁;남균;김철구
    • 한국자기학회지
    • /
    • 제17권1호
    • /
    • pp.1-5
    • /
    • 2007
  • Rutile 구조를 가진 반강자성체 $MnF_2$와 단결정 $MnF_2(1.5%\;EuF_3)$의 Infra-Red 흡수 스펙트럼과 Photoluminescence 측정을 했다. 측정된 Data의 분석을 통해서 $EuF_3$가 1.5% 첨가된 $MnF_2$와 순수한 $MnF_2$의 광학적 성질의 차이를 밝혀내고, Eu의 첨가에 의해 나오는 PL은 $Eu^{3+}$의 f-d 전이에 의한 것임을 확인했다.

선체냉각을 위한 해수분사노즐의 산포특성에 관한 실험 연구 (An Experimental Study on the Dispersion Characteristics of Seawater Injection Nozzle for Hull Cooling)

  • 윤석태;정호석;조용진
    • 한국군사과학기술학회지
    • /
    • 제20권6호
    • /
    • pp.767-773
    • /
    • 2017
  • Infrared stealth is an important technology for naval ships. This technology helps improve the anti-detection performance and survivability of naval ships. In general, the infrared signature of naval ships are categorized into internal and external heat source. External signature are generated by ship surface heating by solar flux as well as the complicated heat transfer process with the surrounding weather condition. Modern naval ships are equipped with seawater injection nozzles on the outside for nuclear, biological and, chemical, and these nozzles are used to control external signature. Wide nozzle placement intervals and insufficient injection pressure, however, have reduced seawater dispersion area. To address this problem, nozzle installation standards must be established. In this study, an actual-scale experimental system was implemented to provide the evidence for nozzle installation standards in order to reduce the infrared signature of naval ships. In addition, the environmental conditions of the experiment were set up through computational fluid dynamics considering the ocean climate data and naval ship management conditions of South Korea. The dispersion distance was measured using a high-resolution thermography system. The flow rate, pipe pressure, and dispersion distance were analyzed, and the evidence for the installation of seawater injection nozzles and operation performance standards was suggested.

적설역에서 나타나는 적외 휘도온도와 반사도 특성 (The Characteristics of Visible Reflectance and Infra Red Band over Snow Cover Area)

  • 염종민;한경수;이가람
    • 대한원격탐사학회지
    • /
    • 제25권2호
    • /
    • pp.193-203
    • /
    • 2009
  • 적설은 지표 에너지수지를 결정하는 중요한 변수중의 하나이다. 위성자료를 이용하여 지면 정보를 산출함에 있어서 적설과 구름을 구분하는 것은 매우 중요한 위성전처리 과정이다. 일반적으로 잘못된 적설과 구름의 분류는 위성자료를 이용한 지면 정보 산출에 있어서 직접적인 오차 요인이 된다. 따라서, 본 연구에서는 원격탐사 자료를 이용하여 적설 지역을 탐지하는 알고리즘에 대해서 연구하고자 한다. 적설역을 탐하지 하기 위해서, 가장 많이 사용되는 정규화 적설 지수(NDSI: Normalized Difference Snow Index)를 사용하지 않고 가시채널과 적외 채널을 이용한 방법을 제시하였다. COMS 기상영상기 (MI: Meteorological Imager) 채널에서는 정규적설 지수 산출 시 요구되는 근적외 채널을 탑재하지 않기 때문이다. 가시 채널을 이용한 적설 탐지는 구름이 혼재되어 있지 않은 지역에서는 잘 탐지하였으나 구름과 혼재되어 있는 지역에서는 어려움이 있다. 이러한 어려움을 보완하기 위해 적외채널 온도차 ($11{\mu}m\;-\;3.7{\mu}m$)를 이용하는 방법을 수행하였다. 온도차를 이용하는 방법은 가시채널만을 적용했을 때 보다는 향상된 탐지 능력을 보인다.

Climate Hazards Group InfraRed Precipitation with Station (CHIRPS)와 한반도 지상관측 강수량 자료의 비교 평가 (Intercomparison of Satellite-based Climate Hazards Group InfraRed Precipitation with Stations (CHIRPS) Gridded Dataset and Rain Gauge Data over Korea)

  • 전민기;남원호;문영식;김태곤;홍은미
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2018년도 학술발표회
    • /
    • pp.197-201
    • /
    • 2018
  • 인공위성 기반의 원격탐사자료는 홍수, 가뭄 등 자연재해에 대한 모니터링 및 예측에 활용되어 왔으며, 특히 인공위성을 이용한 광역적 강수량 추정 자료는 지형적 제약을 받는 지상관측자료와 비교하여 시공간적으로 연속적이고 균질한 강수량 자료 취득이 가능하다는 장점이 있다. 우리나라의 경우 상대적으로 조밀한 지상관측망이 구축되어 있어 공간적으로 상세한 강수량 정보를 생산할 수 있는 여건을 갖추고 있지만, 북한 지역의 경우 기상, 수문, 통계자료에 관한 자료의 접근 및 품질의 제한성으로 인해 미계측 지역에 대한 강수량의 추정에 한계가 있다. CHIRPS (Climate Hazards Group InfraRed Precipitation with Stations) 데이터는 1999년부터 미국국제개발처 (U.S. Agency for International Development, USAID), 미국항공우주국 (National Aeronautics and Space Administration, NASA), 미국해양대기청 (National Oceanic and Atmospheric Administration, NOAA)의 지원으로 개발된 전지구 강우데이터 자료이다. CHIRPS는 1981년부터 현재까지 전지구 강우자료를 0.05도 격자 해상도로 제공하고 있으며, 강수량의 추세 분석 및 가뭄 모니터링을 위해 활용되고 있다. 본 연구에서는 CHG (Climate Hazards Group)에서 제공하고 있는 인공위성을 이용한 광역적 강수량 추정 자료인 CHIRPS와 남한 및 북한의 지상관측 강수량 자료와의 비교를 통해 위성으로부터 유도된 격자 강수량자료의 정확도 및 지역적인 강수추정의 불확실성을 평가하고, 수자원 및 재해 분야 이용 가능성을 검토하고자 한다.

  • PDF

위성기반 Climate Hazards Group InfraRed Precipitation with Station (CHIRPS)를 활용한 한반도 지역의 기상학적 가뭄지수 적용 (Application of Meteorological Drought Index using Climate Hazards Group InfraRed Precipitation with Station (CHIRPS) Based on Global Satellite-Assisted Precipitation Products in Korea)

  • 문영식;남원호;전민기;김태곤;홍은미
    • 한국농공학회논문집
    • /
    • 제61권2호
    • /
    • pp.1-11
    • /
    • 2019
  • Remote sensing products have long been used to monitor and forecast natural disasters. Satellite-derived rainfall products are becoming more accurate as space and time resolution improve, and are widely used in areas where measurement is difficult because of the periodic accumulation of images in large areas. In the case of North Korea, there is a limit to the estimation of precipitation for unmeasured areas due to the limited accessibility and quality of statistical data. CHIRPS (Climate Hazards Group InfraRed Precipitation with Stations) is global satellite-derived rainfall data of 0.05 degree grid resolution. It has been available since 1981 from USAID (U.S. Agency for International Development), NASA (National Aeronautics and Space Administration), NOAA (National Oceanic and Atmospheric Administration). This study evaluates the applicability of CHIRPS rainfall products for South Korea and North Korea by comparing CHIRPS data with ground observation data, and analyzing temporal and spatial drought trends using the Standardized Precipitation Index (SPI), a meteorological drought index available through CHIRPS. The results indicate that the data set performed well in assessing drought years (1994, 2000, 2015 and 2017). Overall, this study concludes that CHIRPS is a valuable tool for using data to estimate precipitation and drought monitoring in Korea.

적외선 신호저감 장치 모형시험을 위한 계측기의 성능평가 (Performance Evaluation of Measuring Instrument for Infra-Red Signature Suppression System Model Test)

  • 윤석태
    • 한국산업정보학회논문지
    • /
    • 제28권6호
    • /
    • pp.21-27
    • /
    • 2023
  • 현대 함정은 외부로 방사되는 적외선 신호를 낮추기 위해 폐기관에 적외선 신호저감 장치(Infra-Red Signature Suppression system, IRSS)를 설치한다. 그리고 함정은 생의 주기가 매우 긴 전략 자산으로 탑재 장비들의 성능에 대한 높은 신뢰성을 충분히 확보해야 한다. 따라서, IRSS와 같은 장비들은 설계 단계에서 모형시험을 통해 성능평가를 하고 있다. IRSS의 모형시험에서는 다양한 계측기기들이 사용된다. 그러므로, 모형시험 단계 이전에 계측기들의 신뢰성을 평가해야 한다. 본 연구에서는 IRSS 모형시험에 사용되는 계측 장비들의 신뢰성 평가에 관한 연구를 수행하였다. 시험 장비와 계측기는 열 풍동 시험기, 피토 튜브와 디지털 차압계, 열전대 센서 그리고 디지털 기록계가 사용되었다. 계측 결과 열 풍동 시험기의 풍속이 증가할수록 유동의 계측 편차가 감소하였으며, 열전대 센서의 온도는 사용 방법에 따라 반응 속도 및 민감도의 차이를 보였다.