• 전기학회논문지
• /
• 제59권10호
• /
• pp.1803-1808
• /
• 2010

Electric railway system consists of rolling stock, track, signal and catenary system. ATP system in railway signaling system is the important one grasping the position and velocity of a train. The wayside device of ATP system is installed between rails. Recently, the research about increasing train speed has been developed in total departments of the railroad systems. The study on the information transmission between on-board device and wayside device is required for increasing the train speed in the ATP system. When the train speed is increased as to same transmission distance, the problem on information transmission occurs because the transmission time is decreased. In case that the transmission distance is extended, the transmission time is decreased with respect to the train speed. Therefore, we have to define the standard magnetic field intensity as to the train speed in order to transmit correctly telegram. In this paper, the transmission distance for the telegram is suggested on the basis of the train speed. Also, the standard magnetic field intensity from the wayside device to on-board device is proposed by using transmission distance regarding the train speed in the ERTMS/ETCS system by using Matlab program. Also, BER according to the train speed is presented by calculating electric field intensity from the magnetic field intensity.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권10호
• /
• pp.502-509
• /
• 2002

In the analysis of lightning surges, transmission towers are usually simulated by ATPDraw. The modeling of transmission towers is an essential part of the traveling wave analysis of lightning surges in transmission lines. The tower model is applied to the 154kV transmission tower of which surge performance characteristics are measured Tower surge response is computed using nonuniform, single-phase line models for both transmission tower and ground wire. The overvoltage will effect to the underground transmission line. The underground cable is combined by duct and trefoil type, and the each arrester is placed on the leading-in tube and outgoing tube. This paper analyzed the effect of lightning overvoltage on the underground cable system.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.461-463
• /
• 2018

본 논문에서는 동기식 광 네트워크 SDH(Synchronous Digital Hierarchy)망의 장거리 무선 전송을 위해 필요한 연동 장치를 연구하였다. SDH 방식의 기본 전송단위인 STM-1 신호와 155Mbps급 Synchronous Etherenet의 무선 전송 구현 및 측정 방법을 제안한다. STM-1 전송과 Synchronous Ethernet 전송을 위해 클럭 동기 회복 기능을 제공하며, 안정적인 동기 확보를 위해 예비 클럭 전환 기능을 설계 하였다.

• KIEE International Transactions on Power Engineering
• /
• 제5A권1호
• /
• pp.79-84
• /
• 2005

In many countries, the electric power industry is undergoing significant changes known as deregulation and restructuring. These alterations introduce competition in generation and retail and require open access to the transmission network. The competition of the electric power industry causes many issues to surface. Among them, unbundling of the transmission service is probably the most complicated as it is a single and integrated sector and the transmission revenue requirement must be allocated to market participants in a fair way. In these situations, it is valuable to research the methodologies to allocate transmission usage. The power tracing method offers useful information such as which generators supply a particular load or how much each generator (load) uses a particular transmission line. With this information, we can allocate required transmission revenue to market participants. Recently, several algorithms were proposed for tracing power flow but there is no dominant power tracing method. This paper proposes a power tracing method based on graph theory and complex-current distribution. For practicability, the proposed method for transmission usage allocation is applied to IEEE 30 buses and compared with the method proposed by Felix F.Wu.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권12호
• /
• pp.5855-5877
• /
• 2017

In view of personal health and disease management based on cost effective healthcare services, there is a growing need for real-time monitoring services. The electrocardiogram (ECG) signal is one of the most important of health information and real-time monitoring of the ECG can provide an efficient way to cope with emergency situations, as well as assist in everyday health care. In this system, it is essential to continuously collect and transmit large amount of ECG data within a given time and provide maximum user convenience at the same time. When considering limited wireless capacity and unstable channel conditions, appropriate signal processing and transmission techniques such as compression are required. However, ISO/IEEE 11073 standards for interoperability between personal health devices cannot properly support compressed data transmission. Therefore, in the present study, the problems for handling compressed data are specified and new extended agent and manager are proposed to address the problems while maintaining compatibility with existing devices. Extended devices have two PM-stores enabling compression and a novel transmission scheme. A variety of compression techniques can be applied; in this paper, discrete cosine transformation (DCT) is used. And the priority of information after DCT compression enables new transmission techniques for performance improvement. The performance of the compressed signal and the original uncompressed signal transmitted over the noisy channel are compared in terms of percent root mean square difference (PRD) using our simulation results. Our transmission scheme shows a better performance and complies with 11073 standards.

• 한국항해학회지
• /
• 제15권4호
• /
• pp.1-11
• /
• 1991

Since it is very important for an ocean-going vessel to transmit information quickly and accurately to her owner or charterer not only for the ship's safety but for economic operation of the ship, some newly-built automated vessels equipped with automatic information transmission system which consists of INMARSAT-C and specially-designed computer. This system, however, is not applicable to the existing vessel without chaging her equipments and, furthermore, is too expensive for small shipping companies to fit out such a system on their vessels. Therefore, we propose a low-priced information transmission system which consists of a personal computer and communication equipments in the existing vessel, and in this paper, as the groundwork of the proposed system, we have made up the ship's position transmission system which is composed of and IBM AT-compatible, PC, INMARSAT-A and a GPS receiver. As the test result of the system through sea trial on the training ship 'HANBADA', we confirmed that transmission of the ship's position was achieved succesfully and consequently there could be high possibility of cost-effectiveness of the proposed system.

• Journal of Information Processing Systems
• /
• 제7권3호
• /
• pp.531-542
• /
• 2011

In this paper, we propose a new congestion control scheme for high-speed networks. The basic idea of our proposed scheme is to adopt a game theory called, "Minority Game" (MG), to realize a selective reduction of the transmission speed of senders. More concretely, upon detecting any congestion, the scheme starts a game among all senders who are participating in the communication. The losers of the game reduce the transmission speed by a multiplicative factor. MG is a game that has recently attracted considerable attention, and it is known to have a remarkable property so that the number of winners converges to a half the number of players in spite of the selfish behavior of the players to increase its own profit. By using this property of MG, we can realize a fair reduction of the transmission speed, which is more efficient than the previous schemes in which all senders uniformly reduce their transmission speed. The effect of the proposed scheme is evaluated by simulation. The result of simulations indicates that the proposed scheme certainly realizes a selective reduction of the transmission speed. It is sufficiently fair compared to other simple randomized schemes and is sufficiently efficient compared to other conventional schemes.

• 한국통신학회논문지
• /
• 제31권9A호
• /
• pp.856-867
• /
• 2006

This paper proposes a new algorithm for opportunistic scheduling that take advantage of both multiuser diversity and power control. Motivated by the multicast RTS and priority-based CTS mechanism of OSMA protocol, we propose an opportunistic packet scheduling with power control scheme based on IEEE 802.11 MAC protocol. The scheduling scheme chooses the best candidate receiver for transmission by considering the SINR at the nodes. This mechanism ensures that the transmission would be successful. The power control algorithm on the other hand, helps reduce interference between links and could maximize spatial reuse of the bandwidth. We then formulate a convex optimization problem for minimizing power consumption and maximizing net utility of the system. We showed that if a transmission power vector satisfying the maximum transmission power and SINR constraints of all nodes exist, then there exists an optimal solution that minimizes overall transmission power and maximizes utility of the system.

• 한국컴퓨터정보학회논문지
• /
• 제4권4호
• /
• pp.155-162
• /
• 1999

화상회의 응용이 인터넷을 통해 최선의 서비스를 제공하려면 실 시간성을 지원해야 하는데, 인터넷의 동적인 특성상 멀티미디어 응용의 서비스 품질을 보장하지 못한다. 이런 이유로 화상회의 용용은 송신자와 수신자 사이의 현재 사용 가능한 대역폭을 측정하여 데이터를 적절하게 전송하는 것이 필요하다. 본 논문은 RTCP(Real-time Transport Control Protocol)를 사용하여 가용 대역폭을 측정하고, 측정된 가용 대역폭을 토대로 멀티미디어 데이터를 적절하게 전송하기 위해 코덱에서의 데이터 생성량을 줄이고, 데이터 압축률을 변화시키고, 전송 버퍼에서 패킷 손실률을 기반으로 패킷의 우선 순위에 따라 프레임을 폐기하여, 대역폭에 유연하게 실시간 멀티미디어 데이터를 전송하는 알고리즘을 제안한다.

• 한국정보통신학회논문지
• /
• 제8권8호
• /
• pp.1777-1782
• /
• 2004

본 논문에서는 XML을 기반으로 한 처방전 전송 시스템을 제안하고, XML/EDI의 암호화를 위하여 XML 문서에만 전자서명을 첨부하는 것이 아니라, DTD에 전자 서명을 첨부하는 방법을 사용함으로써 보다 안전한 처방전 전송 시스템을 구축하고자 한다. 처방전 DTD는 앞서 살펴본 처방전의 각 구성요소에 따라 처방전 정보, 환자 정보, 의료기관 정보, 처방내역 정보, 조제내역 정보 엘리먼트를 정의하고 그 하위에 정보 전송에 따른 정보를 관리하기 위한 하위 엘리먼트를 정의하였다. 안전한 처방전전송을 위하여 DTD파일을 읽어 들이면서 파싱을 하고 여기서 추출되는 엘리먼트나 속성, 엔티티들을 해시테이블에 저장한다. 파싱이 종료되면 해시 테이블을 읽어 들여서 메시지 다이제스트를 수행하고 이를 개인키와 합성하여 전자 서명을 생성한다.