• Journal of radiological science and technology
• /
• v.30 no.1
• /
• pp.13-23
• /
• 2007

In recent years, mammography system is changed rapidly from conventional screen-film system to digital system for application to screening and diagnosis. Digital mammography system provides several advantages over screen-film mammography system. According to the information provided by the manufacturer, digital mammography system offers radiation dose reduction in comparison with screen-film mammography system, because of digital detector, particularly direct digital detector has higher x-ray absorption efficiency than screen-film combination or imaging plate(IP). We measured average glandular doses(AGD) in screen-film mammography(SFM) system with slow screen-film combination, computed mammography(CM) system, indirect digital mammography(IDM) system and direct digital mammography(DDM) system using brest tissue-equivalent phantom(glandularity 30%, 50% and 70%). The results were shown as follows : AGD values for DDM system were highest than those for other systems. Although automatic exposure control(AEC) mode was selected, the curve of the AGD values against thickness or glandularity increased significantly for the SFM system with the uniform target/filter(Mo/Mo) combination. Therefore, the AGD values for the high energy examinations were highest in the SFM system, and those for the low energy examinations were highest in the DDM system. But the curve of the AGD values against thickness and glandularity increased gently for CM system with the automatic selection of the target/filter combination (from Mo/Mo to Mo/Rh or from Mo/Rh to Rh/Rh), and the AGD values were lowest. Consequently, the parameters in mammography for each exposure besides detection efficiency play an important role in oder to estimate a patient radiation dose.

• Journal of Korea Water Resources Association
• /
• v.40 no.10
• /
• pp.769-781
• /
• 2007

Factor analysis has been usually employed in reducing quantity of data and summarizing information on a system or phenomenon. In this analysis methodology, variables are grouped into several factors by consideration of statistic characteristics, and the results are used for dropping variables which have lower weight than others. In this study, factor analysis was applied for extracting primary factors influencing multi-dam system operation in the Han River basin, where there are two multi-purpose dams such as Soyanggang Dam and Chungju Dam, and water has been supplied by integrating two dams in water use season. In order to fulfill factor analysis, first the variables related to two dams operation were gathered and divided into five groups (Soyanggang Dam: inflow, hydropower product, storage management, storage, and operation results of the past; Chungju Dam: inflow, hydropower product, water demand, storage, and operation results of the past). And then, considering statistic properties, in the gathered variables, some variables were chosen and grouped into five factors; hydrological condition, dam operation of the past, dam operation at normal season, water demand, and downstream dam operation. In order to check the appropriateness and applicability of factors, a multiple regression equation was newly constructed using factors as description variables, and those factors were compared with terms of objective function used in operation water resources optimally in a river basin. Reviewing the results through two check processes, it was revealed that the suggested approach provided satisfactory results. And, it was expected for extracted primary factors to be useful for making dam operation schedule considering the future situation and previous results.

• The Journal of Engineering Geology
• /
• v.22 no.1
• /
• pp.67-81
• /
• 2012

The physical, chemical, and biological properties of clogging materials formed within groundwater wells in the Mt. Geumjeong area, Busan, Korea, were characterized. The particle size distribution (PSD) of clogging materials was measured by a laser analyzer. XRD, SEM, and TEM analyses were performed to obtain mineralogical information on the clogging materials, with an emphasis on identifying and characterizing the mineral species. In most cases, PSD data exhibited an near log-normal distribution; however, variations in frequency distribution were found in some intervals (bi-or trimodal distributions), raising the possibility that particles originated from several sources or were formed at different times. XRD data revealed that the clogging materials were mainly amorphous ironhydroxides such as goethite, ferrihydrite, and lapidocrocite, with lesser amounts of Fe, Mn, and Zn metals and silicates such as quartz, feldspar, micas, and smectite. Reddish brown material was amorphous hydrous ferriciron (HFO), and dark red and dark black materials were Fe, Mn-hydroxides. Greyish white and pale brown materials consisted of silicates. SEM observations indicated that the clogging materials were mainly HFO associated with iron bacteria such as Gallionella and Leptothrix, with small amounts of rock fragments. In TEM analysis, disseminated iron particles were commonly observed in the cell and sheath of iron bacteria, indicating that iron was precipitated in close association with the metabolism of bacterial activity. Rock-forming minerals such as quartz, feldspar, and micas were primarily derived from soils or granite aquifers, which are widely distributed in the study area. The results indicate the importance of elucidating the formation mechanisms of clogging materials to ensure sustainable well capacity.

• Applied Microscopy
• /
• v.40 no.1
• /
• pp.37-45
• /
• 2010

Captured wild specimens of the big white-toothed shrew, Crocidura lasiura were classified into three age classes by tooth wear and height of molars, and seasonal variations of breeding and reproductive organs were examined. Juveniles had not tooth wear in molars and height of the third molars were lower than the first and second molars, and had only non-breeding condition. Young adults had little tooth wear and the third molars reached to the first and second molars, and old adults had heavy tooth wear in molars, young adults and old adults had breeding or non-breeding condition according to the season. On the basis of histological examination, seasonal variations of breeding were confirmed that breeding condition of young and old adult males were continued from early February to early October although the breeding activity was the highest in April, that of females were continued from the end of March to October, males reached sexual maturity earlier than females. Whereas the breeding condition seems to cease for non-breeding season because of the deficiency of food resources, soil invertebrates. Young and old adult males of the breeding season had large testes with enlarged seminiferous tubules that were filled with numerous germ cells, and expanded caudal epididymides with a vast number of spermatozoa, and were more than 10.0 g in the body weight and 0.03 g in the testis and epididymis weight. The females of the breeding season were pregnant condition with 4~6 litters or had the Graafian follicles and the corpus lutea in the ovary, and were more than 9.6 g in the body weight.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.2
• /
• pp.203-209
• /
• 2009

Yield monitoring is one of a precision agriculture technology that is used most widely. It is spatial variability analysis of yield information that should be attained with yield monitoring system development. This experiment was conducted to evaluate spatial variability of yield and grain moisture content in rice paddy field, and their relationships to rice productivity. It is necessary to minimize sampling interval for accurate yield map making or to control cutting width of rice combine. Considering small rice plots such as $0.2{\sim}0.4$ ha, optimum size of sampling plot was below 15 m more than 5 m in with and length. In variable rate treatment field, average yield was similar, but yield variation was reduced than conventional field. Gap of yield by another plot in same field was bigger than half of average yield than yield variation was significantly big. Therefore yield measuring flow sensor must be able to measure at least 300 kg/10a more than 1000 kg/10a. Variation of moisture content in same field was not big and spatial dependance did not appear greatly. But, variation between different field is appeared difference according to weather circumstance before harvesting. Change of spatial dependence of yield was not big, because of field variation of moisture content is not big.

• Horticultural Science & Technology
• /
• v.34 no.5
• /
• pp.779-789
• /
• 2016

A total of 33 accessions of pepper (Capsicum spp.), including previously reported and newly discovered sources of resistance to bacterial spot caused by Xanthomonas euvesicatoria, were evaluated for their resistance to bacterial spot. The selected accessions were then grown and their horticultural characteristics were recorded. In a test for hypersensitive resistance (HR) to four races (P1, P3, P7, P8) of the pathogen found in Korea, KC00939 and Chilbok No.2, which carry the Bs2 gene, exhibited a hypersensitive response to all four races, as expected. Chilbok No.3, which carries the Bs3 gene, showed a hypersensitive reaction to race 1 and 7, as expected. KC00939 exhibited a high ASTA color value and tolerance to multiple infections from a viral complex of Cucumber mosaic virus (CMV) and Broad bean wilt virus (BBWV). Thus, this accession represents a promising genetic resource for breeding cultivars with multiple disease resistance and strong red coloration. KC01327, KC01617, KC01015, KC01760, KC01779, KC01137, KC01328, KC01006, KC00127, KC01704, and KC00995 did not exhibit hypersensitivity but showed a high level of general resistance when evaluated by spray inoculation. KC01617, KC01760, KC01779, KC01137, KC01704, and KC01777 are newly identified sources of resistance to bacterial spot. The previously and newly identified sources of resistance to bacterial spot evaluated in this study, including information about their resistance to CMV and BBWV complex in the field, the contents of pungent and sweet taste components, and the color values of dry fruits, will be useful for breeding pepper cultivars with resistance to bacterial spot.

• Horticultural Science & Technology
• /
• v.34 no.5
• /
• pp.665-676
• /
• 2016

As high temperature during citrus growing season has caused a serious problems including inferior coloration in production of mandarins in Korea, we were to investigate the expression pattern of several genes related with coloration during the ripening in high temperature condition of citrus fruits. The expression of genes related with sugar metabolism, cell wall degradation, and flavonoid synthesis in high temperature conditions was investigated in fruits of 'Haryejosaeng' (Citrus unshiu) and 'Shiranuhi' mandarin (C. reticulata). While the expression of beta-amylase (BMY), phenylalanine ammonia-lyase (PAL), chalcone synthase (CHS), and flavanone 3-hydroxylase (F3H) was differently induced, expression of polygalacturonase (PG) decreased dependently on temperature conditions. In 'Haryejosaeng' mandarin, while the expression of genes related to the skin coloration, such as CHS and F3H genes increased at $25^{\circ}C$, the expression of PAL and stilbene synthase (STS) genes were induced at $30-35^{\circ}C$ in all ripening stages. In 'Shiranuhi' mandarin, the expression of the BMY gene decreased at early time point in all temperature condition and then increased at $30-35^{\circ}C$ than at $25^{\circ}C$ in the ripening stage 2 to 3 of fruits. F3H and STS genes also showed the tendency to decrease at $30-35^{\circ}C$. Although the expression levels of genes in ripening stage 1 and stage 2 of fruits showed similar patterns in both 'Haryejosaeng' and 'Shiranuhi', the expression levels of genes were down-regulated in late ripening stage of 'Shiranuhi' fruits compared to 'Haryejosaeng'. In general, the mRNA levels of seven tested genes were higher in 'Haryejosaeng' than in 'Shiranuhi' mandarin, and expression of genes by high temperature was regulated sensitively in 'Haryejosaeng' compared to 'Shiranuhi' mandarin. Further investigations of expression of various genes based on transcriptome analysis in early ripening stage can provide valuable information about the responses to climatic changes in ripening citrus fruits.

• Journal of Internet Computing and Services
• /
• v.17 no.4
• /
• pp.35-42
• /
• 2016

Recently many researches have been focused on the use of the markerless augmented reality system using face, foot, and hand of user's body to alleviate many disadvantages of the marker based augmented reality system. In addition, most existing augmented reality systems have been utilized rigid objects since they just desire to insert and to basic interaction with virtual object in the augmented reality system. In this paper, unlike restricted marker based augmented reality system with rigid objects that is based in display, we designed and implemented the markerless augmented reality system using deformable objects to apply various fields for interactive situations with a user. Generally, deformable objects can be implemented with mass-spring modeling and the finite element modeling. Mass-spring model can provide a real time simulation and finite element model can achieve more accurate simulation result in physical and mathematical view. In this paper, the proposed markerless augmented reality system utilize the mass-spring model using tetraheadron structure to provide real-time simulation result. To provide plausible simulated interaction result with deformable objects, the proposed method detects and tracks users hand with Kinect SDK and calculates the external force which is applied to the object on hand based on the position change of hand. Based on these force, 4th order Runge-Kutta Integration is applied to compute the next position of the deformable object. In addition, to prevent the generation of excessive external force by hand movement that can provide the natural behavior of deformable object, we set up the threshold value and applied this value when the hand movement is over this threshold. Each experimental test has been repeated 5 times and we analyzed the experimental result based on the computational cost of simulation. We believe that the proposed markerless augmented reality system with deformable objects can overcome the weakness of traditional marker based augmented reality system with rigid object that are not suitable to apply to other various fields including healthcare and education area.

• Journal of Internet Computing and Services
• /
• v.17 no.1
• /
• pp.23-33
• /
• 2016

The current smart lighting is shaped to offer the lighting environment suitable for current context, after identifying user's action and location through a sensor. The sensor-based context awareness technology just considers a single user, and the studies to interpret many users' various context occurrences and conflicts lack. In existing studies, a fuzzy theory and algorithm including ReBa have been used as the methodology to solve context conflict. The fuzzy theory and algorithm including ReBa just avoid an opportunity of context conflict that may occur by providing services by each area, after the spaces where users are located are classified into many areas. Therefore, they actually cannot be regarded as customized service type that can offer personal preference-based context conflict. This paper proposes a priority-based LED lighting control system interpreting multiple context conflicts, which decides services, based on the granted priority according to context type, when service conflict is faced with, due to simultaneous occurrence of various contexts to many users. This study classifies the residential environment into such five areas as living room, 'bed room, study room, kitchen and bath room, and the contexts that may occur within each area are defined as 20 contexts such as exercising, doing makeup, reading, dining and entering, targeting several users. The proposed system defines various contexts of users using an ontology-based model and gives service of user oriented lighting environment through rule based on standard and context reasoning engine. To solve the issue of various context conflicts among users in the same space and at the same time point, the context in which user concentration is required is set in the highest priority. Also, visual comfort is offered as the best alternative priority in the case of the same priority. In this manner, they are utilized as the criteria for service selection upon conflict occurrence.

• Korean Journal of Ecology and Environment
• /
• v.51 no.2
• /
• pp.149-159
• /
• 2018

Twenty-nine wetlands (20 river type and 9 lake type wetlands) in Gyeongsangnam-do were investigated to understand the characteristics of fish assemblages by the wetland type and to suggest management strategies. As a result, $10.3{\pm}4.8$ species were collected from river type wetlands on average (${\pm}SD$) and $9.1{\pm}4.1$ species from lake type wetlands. Thus, there was no significant difference in the number of species between them (Mann-Whitney U test, P>0.05). However, the species that constitute the fish assemblage showed statistically significant differences between the two wetland types (PERMANOVA, Pseudo-F=2.9555, P=0.007). Furthermore, the species that contribute the most to each type of fish assemblage were Zacco koreanus (river type, 28.51%) and Lepomis macrochirus (lake type, 23.21%), respectively (SIMPER). The results of the NMDS analysis using the fish assemblage by place classified the species into three groups (river type, lake type, and others). The current wetland management is only focused on endangered species, but this study shows a difference in fish assemblage by wetland type. Therefore, a management system based information on endemic species, exotic species and major contribution species should be provided. Furthermore, the classification of some types of wetlands based on the present topography was found to be ambiguous, and wetland classification using living creatures can be used as a complementary method. This study has limitations because only two types of wetlands were analyzed. Therefore, a detailed management method that can represent every type of wetland should be prepared through the research of all types of wetlands in the future.