• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.797-800
• /
• 2011

The objective of MPEG Media Transport (MMT), which is on going standard, is to develop efficient delivery of media over packet based networks in an adaptive, progressive, download/streaming fashion over various IP based networks, including terrestrial, satellite and cable broadcast networks. In this paper we introduce utilization of signal strength information based on Cross Layer Design(CLD) to efficient multimedia delivery over wireless network in which in practice the wireless conditions can vary significantly. Many recent studies have shown that a significant improvement in wireless video throughput can be achieved by utilizing signal strength information on CLD [1][2]. Despite of its usefulness, however, it was difficult to employ signal strength information in rate adaptation applications due to different representation of signal strength information for each underlying wireless network. To that end, we proposed syntax and semantics of signal strength information in such a way that the information can be interpreted in the unified way. The proposed signal strength information was proposed for the MMT standardization.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.505-508
• /
• 1999

Chua's circuit is a simple electronic network which exhibits a variety of bifurcati ell and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chua's circuits are proposed and a secure communications of lossless transmission line are investigated. A secure communication method in which tile desired information signal is synthesized with the chaos signal created by the Chua's circuit is proposed and information signal is demodulated also using the Chua's circuit. Tile proposed method is synthesizing tile desired information with the chaos circuit by adding the information signal to the chaos signal in the lossless transmission system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.9
• /
• pp.686-692
• /
• 2016

A Crimp Force Monitor (CFM) is equipment for detecting crimp errors by analyzing crimp signals obtained from force and strain sensors. The analysis is commonly performed by aligning a measured crimp signal with a reference signal and comparing their difference. Current analysis methods often suffer from wrong alignments that result in false negative detections. This paper presents a new crimp signal analysis method in CFM. First, a falling edge alignment is proposed that matches falling edges of the measured and the reference signals by minimizing the absolute difference summation. Second, a signal parameter error is introduced to evaluate the crimp quality difference between the measured signal and the reference. For calculating the signal parameter error, part of a signal is identified and divided into several regions to maximize the signal parameter errors. Experiments showed that the proposed method can improve the signal alignment and accurately detect bad crimps especially with the strain sensor.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.8
• /
• pp.7-14
• /
• 1992

This paper persents how the signal is expressed by an implied unit data and the implied unit data is regenerated into the original signal. This shows that the regenerated signal is equal or similar to the original signal depending on the number of chaos prediction. The algorithm quoted above is implemented from the signal composed of 30 data. This algorithm will be applied to the applied science of data communication: information storage, speech processing, CAD, character recognition, etc...

• Journal of information and communication convergence engineering
• /
• v.9 no.2
• /
• pp.220-223
• /
• 2011

Respiration signal of the vital signs is an important parameter in clinical parts. To extract the respiration signal from PPG signal for mobile healthcare system is difficult because the bands of the motion artifacts and respiration in the frequency domain are overlapped. This study to improve this problem suggested a respiration extraction method using the independent component analysis and evaluated its performances. In results of evaluation, the ICA method showed better performance than LPF suggested recently.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.3
• /
• pp.97-105
• /
• 2015

A navigation signal based on orthogonal tiered polyphase code was proposed. For the proposed signal, tiered polyphase code was used as the code of a pilot channel. Tiered polyphase code is a complex number type code, and thus the pilot channel and data channel were separated using the Walsh code which makes the correlation between different codes become 0. The results of the simulation indicated that the correlation characteristics and signal acquisition performance of the proposed signal were identical to those of tiered polyphase code, and that the disadvantage of tiered polyphase code could be supplemented through a data channel in terms of signal tracking.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.304-308
• /
• 2009

This paper proposes a new concept of a signal constellation of the recently introduced half-symbol-rate-carrier phase-shift keying (HSRC-PSK) modulations for bandwidth-efficient high speed data communications. Since the HSRC-PSK modulations contain different symbol energies representing the same bit sequences due to the loss of orthogonality of their HSRC signals, it is very hard to represent the symbol using the conventional signal constellation. To resolve the problem, two different energies are assigned to represent one symbol for the HSRC offset quadrature phase shift keying (OQPSK) modulation. Similarly, the different energies exist to display the different symbol for HSRC minimum shift keying (MSK) modulation. With the proposed signal space representation, HSRC-PSK symbol can easily be shown with a two-dimensional scatter plot which provides helpful information of evaluating HSRC-PSK signal's quality.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.530-532
• /
• 1997

In this paper, a transmitter and a receiver using two identical Chua's circuits are proposed and a wire secure communications are investigated. A secure communication method in which the desired information signal is synthesized with the chaos signal created by the Chua's circuit is proposed and information signal is demodulated also using the Chua's circuit. The proposed method is synthesizing the desired information with the chaos circuit by adding the information signal to the chaos signal in the wire transmission system. After transmitting the synthesized signal through the wire transmission system, it is confirmed the feasibility of the secure communication from result of demodulated signals and recovered wire tapped signals.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.20-33
• /
• 2015

Spectrum sensing is a key component of cognitive radio. The prediction of the primary user status in a low signal-to-noise ratio is an important factor in spectrum sensing. However, because of noise uncertainty, secondary users have difficulty distinguishing between the primary signal and an unauthorized signal when an unauthorized user exists in a cognitive radio network. To resolve the sensitivity to the noise uncertainty problem, we propose an entropy-based spectrum sensing scheme to detect the primary signal accurately in the presence of an unauthorized signal. The proposed spectrum sensing uses the conditional entropy between the primary signal and the unauthorized signal. The ability to detect the primary signal is thus robust against noise uncertainty, which leads to superior sensing performance in a low signal-to-noise ratio. Simulation results show that the proposed spectrum sensing scheme outperforms the conventional entropy-based spectrum sensing schemes in terms of the primary user detection probability.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.71-76
• /
• 2015

In this paper, we developed the hardware GPS signal generator for generating a satellite navigation signal synchronized with Live GPS signal signals and analyzed the performance of signal genterator thorough the experiment For a hardware implementation of the GPS navigation signal synchronous generator, the GPS module may receive a GPS signal in order to generate the same signal as the operation that is transmitted from the current GPS satellite and the synchronized time information and the GPS satellites using the Novatel Inc. OEMStar.In. For generating the GPS synchronization signal, the GPS navigation signal generator was adjusted to a reference clock using the GPS clock synchronous information provided by the GPS receiving module and GPS signals also generated in consideration of the delay of the internal hardware of the generator. In this paper, we analyzed the effect of the receiver via the signal switching between Live GPS signal and generates a signal to measure the performance of the GPS navigation synchronization signal generator. It was confirmed that by the seamless operation of the signal even the moment that the switching of the generated signal from Live GPS signal has occurred through experimentation.