• 전자공학회논문지B
• /
• 제31B권5호
• /
• pp.26-33
• /
• 1994

Phase retrieval is concerned with the reconstruction of a signal from its Fourier transform magnitude (or intensity), which arises in many areas such as X-ray crystallography, optics, astronomy, or digital signal processing. In such areas, the Fourier transform phase of the desired signal is lost while measuring Fourier transform magnitude (F.T.M.). However, if a reference 'signal is added to the desired signal, then, in the Fourier trans form magnitude of the added signal, the Fourier transform phase of the desired signal is encoded. This paper addresses uniqueness and retrieval of the encoded Fourier phase of a multidimensional signal from the Fourier transform magnitude of the added signal along with the Fourier transform magnitude of the desired signal and the information of the additive reference signal. In Part I, several conditions under which the desired signal can be uniquely specified from the two Fourier transform magnitudes and the additive reference signal are presented. In Part II, the development of non-iterative algorithms and an iterative algorithm that may be used to reconstruct the desired signal(s) is considered.

• 전자공학회논문지B
• /
• 제31B권5호
• /
• pp.34-41
• /
• 1994

Phase retrieval is concerned with the reconstruction of a signal from its Fourier transform magnitude (or intensity), which arises in many areas such as X-ray crystallography, optics, astronomy, or digital signal processing In such areas, the Fourier transform phase of the desired signal is lost while measuring Fourier transform magnitude (F.T.M.). However, if a reference 'signal is added to the desired signal, then, in the Fourier trans form magnitude of the added signal, the Fourier transform phase of the desired signal is encoded This paper addresses uniqueness and retrieval of the encoded Fourier phase of a multidimensional signal from the Fourier transform magnitude of the added signal along with Fourier transform magnitude of the desired signal and the information of the additive reference signal In Part I, several conditions under which the desired signal can be uniquely specified from the two Fourier transform magnitudes and the additive reference signal are presented In Part II, the development of non-iterative algorithms and an iterative algorithm that may be used to reconstruct the desired signal (s) is considered

• International Journal of Computer Science & Network Security
• /
• 제24권4호
• /
• pp.206-210
• /
• 2024

Industrial facilities that use modern IT technologies require the ensured reliability and security of information in automated enterprise management. Concurrently, so as to ensure a high quality of communication, it is necessary to expand the bandwidth of communication channels, which are limited by the physical parameters of the radio frequency spectrum. In order to overcome this contradiction, we propose the application of technology fundamental to ultra-wideband signals, in which the ratio between the bandwidth and its central part is greater than "one". For this reason, the information signal is emitted without a carrier frequency - simultaneously within the entire frequency band - provided that the signal level is lower than the noise level. For the transmission of information content, the method of positional-time coding is used, in which each information bit is encoded by hundreds of ultrashort pulses that arrive within a certain sequence. Mathematical models of signals and values observed in wireless communication systems with autocorrelation reception of modulated ultra-wideband signals are furthermore recommended. These assist in identifying features of the dependence of the error probability on the normalized signal-to-noise ratio and the signal base. Comparative analysis has shown that the best noise immunity of the systems considered in this paper is the communication system, which uses the time separation of the reference and information signals. During the first half of the bit interval, the switch closes the output of the transmitter directly to the generator of the ultra-wideband signal - forming a reference signal. In the middle of the bit interval, the switch alternates the output to one of two possible positions depending on the encoding signal - "zero" or "one", forming the information part of the ultra-wideband signal. It should also be noted that systems with autocorrelation reception and separate transmission of reference and information signals, provide a high level of structural signal secrecy. Furthermore, they provide the reliable transmission of digital information, especially in interference conditions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.81-84
• /
• 2001

In this paper, we proposed a digital watermarking for color still image using the characteristics of human visual system and the achromatic block information. We use a binary watermark signal and insert watermark signal in the chromatic component region of YCrCb color space. In order to extract the watermark signal, we extracted the watermark signal by presuming that modified pattern of chromatic saturation without using original an image. Experimental results show that the proposed watermarking method has a good performance to embed watermark signal and extract one.

• Journal of information and communication convergence engineering
• /
• 제7권2호
• /
• pp.170-175
• /
• 2009

This paper introduces Zigbee based ubiquitous service. Most of ubiquitous services require the position information. Positioning algorithms utilize the transmission characteristics of the signal. Zigbee based positioning researches have been conducted mainly for the spatial factors inside the building. This paper proposes the possibility to consider the temporal factors of Zigbee signal and analyzes empirically the signal characteristics influenced according to the temporal factors as well as the spatial factors for ubiquitous services based on Zigbee sensor network.

• 인터넷정보학회논문지
• /
• 제16권2호
• /
• pp.109-115
• /
• 2015

신규 의료기기 개발 기술의 발전으로 다양한 형태로 손쉽게 생체 정보 및 의료 정보를 얻을 수 있는 기술이 증가하고 있다. 이러한 정보 수집 기술과 기기들의 증가로 생체 정보는 일상생활의 라이프로그와 함께 의료서비스의 주요 정보로 활용되고 있다. 그러나 다양한 생체신호의 활용성이 증가하고 있지만 보안적인 측면을 고려하지 않는 문제점을 갖고 있다. 또한, 의료현장에서 환자의 생체신호와 의료영상정보는 개별적인 디바이스에 의해 생성되며, 통합 관리되지 못하는 실정이다. 이러한 문제점을 해결하기 위해서, 본 논문에서는 생체신호와 의사의 소견정보를 포함하여 QR 코드화하고 이와 연계된 의료영상정보와 통합하고자 한다. 이를 위해, 의료영상정보 표준인 DICOM(Digital Imaging and Communication in Medicine)과 기존 생체신호 계측기들로부터 수집된 생체신호를 QR 코드화하여 의료영상정보에 통합한 이미지 파일 스킴을 제시한다. 그리고 시스템 구현 환경은 의료영상기기와 생체신호 수집을 위한 생체신호 계측기 그리고 스마트 디바이스와 PC로 구성하였다. 의료기기나 생체 신호 계측장치로부터 데이터를 전송 받기 위한 의료영상이미지 정보와 생체신호의 ROI 추출을 위하여 .NET Framework를 사용하여 QR 서버 모듈을 윈도우 서버 2008 운영체제에서 운영되도록 구현하였다. QR 서버 모듈의 주요기능은 의료영상기기로부터 생성된 DICOM파일을 파싱하고, 식별 ROI 정보를 추출하여 데이터베이스에 저장하여 관리한다. 또한, EMR, OCS와 같은 환자의 의료정보는 기본 정보 및 긴급상황 시 필요한 ROI 정보를 추출하여 QR코드화 하여 관리한다. 또한 생체 계측 기기로 환자 식별에 사용될 PID (patient identification) 와 함께 생체 정보를 전송 받을 경우 생체 정보의 크기에 따라 이를 해당 환자의 ROI와 함께 QR코드화 하여 관리하며, 생체 정보 파일 또한 저장하여 관리한다. 전송받은 생체정보가 QR코드로 변환할 최대 사이즈 이상일 경우 서버를 통해 생체정보에 접근할 수 있는 URL 정보를 QR코드화 한다. 또한 QR 코드 형태로 제공되는 정보는 .NET 프레임워크가 설치된 PC와 Android기반의 스마트 단말기상에 뷰어 프로그램을 통해 확인함으로 인증된 클라이언트만이 관련 정보를 확인할 수 있도록 하였다. 끝으로 응용 서비스의 수행결과를 통해 기존 의료영상정보와 생체신호 그리고 환자의 건강정보가 통합되어 의료현장에서 적용하는데 적합한 의료정보 서비스를 제공함을 보였다.

• 한국컴퓨터정보학회논문지
• /
• 제28권2호
• /
• pp.121-129
• /
• 2023

이 논문에서 우리는 응급상황에 대응하여 일정 구간의 교통신호를 능동적으로 제어함으로써 재산과 인명 손실을 최소화할 수 있는 응급상황 대응 교통신호 제어 시스템을 개발하였다. 응급 차량 단말기에서 식별정보 및 GPS 정보를 포함한 응급신호를 송출하면 카메라에서 주위 영상을 획득하게 되고, 딥러닝 기반으로 객체를 분석하여 객체의 위치, 종류, 크기 등 정보를 가지는 객체정보를 출력한다. 이 객체를 트래킹한 정보를 생성하여 신호체계를 검출한 후 신호체계를 응급모드로 전환하여 수신받은 GPS 정보를 기준으로 응급 차량을 식별·추적하고 이 응급 차량의 진행 경로 기준으로 긴급 제어신호를 교통신호 제어기로 전송할 수 있는 체계이다. 이 시스템은 응급신호에 따라 우선 적용되는 긴급 제어신호에 의해 응급 차량의 진행이 저지되지 않도록 하여, 교통상 장애에 따른 인명과 재산의 손실을 최소화할 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1015-1018
• /
• 2005

In this paper, we introduce about a new class to analysis of partial discharge signal based on Fuzzy model. We can early diagnose life of power cable through detection of partial discharge signal. However, partial discharge signal detector is difficult because of partial discharge signal is very non-linear. Also, it is very difficult work that separate partial discharge signal from noise. We constructed partial discharge accumulation detection system that use Labview for detection of non-linear partial discharge signal. And analyzed partial discharge signal that is detected by Labview system utilizing Fuzzy model.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2005년도 추계학술대회 학술발표 논문집 제15권 제2호
• /
• pp.440-443
• /
• 2005

In this paper, we introduce about a new class to analysis of partial discharge signal based on Fuzzy model. We can early diagnose life of power cable through detection of partial discharge signal. However, partial discharge signal detector is difficult because of partial discharge signal is very non-linear. Also, it is very difficult work that separate partial discharge signal from noise. We constructed partial discharge accumulation detection system that use Labview for detection of non-linear partial discharge signal. And analyzed partial discharge signal that is detected by Labview system utilizing Fuzzy model.

• Journal of information and communication convergence engineering
• /
• 제3권3호
• /
• pp.146-151
• /
• 2005

This paper represents an attempt to bring together and analyses the measurement data measured by the Satellite Signal Monitoring Center in Korea and the Korea Meteorological Administration/Korea Meteorological Research Institute in close cooperation with this study team. This paper presents the signal characteristic of GEO satellite operating in frequency range 1 to 20GHz associated with Asian Sand Dust (the so-called Yellow Sand Dust). The downlink signal power (dBm) for L-, S-, C-, Ku-, and Ka-band frequencies from GEO satellites were measured in a clear weather and in Asian Sand Dust weather by the Satellite Signal Monitoring Center. The measured signal power(dBm) were compared to the total number concentration and size distribution of Sand Dust that were measured by the Korea Meteorological Administration/Korea Meteorological Research Institute and the possible correlation between these sets data were analyzed. The results demonstrate that the downlink signal level (dBm) of GEO satellite is attenuated by Asian Sand Dust. Hitherto, merger information has been reported as to the influence of sand dust on satellite communications operating in regions affected by sand dust.