Journal of the Korean Society for Library and Information Science
/
v.35
no.4
/
pp.51-77
/
2001
The purpose of this study is to took for systematic, effective ways of providing continuing education for incumbent librarians in order that they could be more specialized in their profession. For the purpose, this research performed pervious literature reach and then a questionnaire survey for the librarians to determine their service periods and opinions, requirements and suggestions about continuing education as above and the current status of the education. The result of the study can be described as below. First, few incumbent librarians generally participate in continuing education. The participation, if any, is different in degree according to types of the librarian's library and task. Second, continuing education provided by responsible agencies is seen negative in value, but relatively positive in validity. it is agreed that the education is not easy to be provided due to a lack of time. Third, individual incumbent librarians are little devoted to continuing education, although the devotion is somewhat different according to the type of library. Fourth, an absolute majority of the librarians want the establishment of an authorities exclusively assuming continuing education service and the provision of informal continuing education related to computer during their working hours or vacation period. Fifth, the librarians under survey suggests that it is necessary for the development of continuing education to establish an exclusively responsible authorities as mentioned before and a system for evaluating each of agencies providing continuing education service, implement relevant, specific programs, introduce incentives for those librarians who receive the education and thereon make studies, help and promote librarians to be trained abroad, apply new ways of continuous education and extend the range of such educational process.
Journal of the Korea Institute of Information and Communication Engineering
/
v.8
no.4
/
pp.894-900
/
2004
There are many types of circularly polarized(CP) microstrip antenna elements, which are used as a good unit radiator. Since an advantage of CP antenna is no strict alignment requirements between Rx and Tx system, the printed antennas with circular polarization are very often used in numerous satellite and mobile radio systems. In order to realize the broad bandwidth of 3 dB axial ratio and impedance of CP microstrip antenna, complex feed structure and tri-plate patch element have been researched. This paper describes a design of wideband microstrip cross slot array antennas with circular polarization. The proposed antenna is composed of an open-ended microstrip feed line as a feeder and a cross slot as a radiator for circular polarization. To realize the wide bandwidth, tri-plate structure are considered and cross slot is electromagnetically coupled with feed line. Optimum parameters of 1-element cross slot antenna are analyzed and designed by method of moments. These parameters are also applied to may antennas design considered the mutual coupling between radiating elements. Right hand circular polarization(RHCP) and left hand circular polarization(LHCP) of the proposed antenna are easily controlled by asymmetrical cross slot structure and slot position. In 1-element and 15-element cross slot array antenna, the good axial ratio of 1 dB below and the broad bandwidth characteristics of antenna are obtained.
Nautical Publications is a special purpose book, or a specially compiled database, that is issued officially by or on the authority of a Government, authorized Hydrographic Office and is designed to meet the requirements of marine navigation such as SOLAS and PSC. Nautical publications include List of Lights, Sailing directions. The SNPWG(Standardization Nautical Publications Working Group) from the IHO is working to implement in computer systems all those elements of interest for Hydrography and Navigation Concerning nautical publications' digitization process, the SNPWG has defined three types of nautical publications: Type 1 : Hard copy(NP1), Type 2 : Digital version, A slight modification of type 1(NP2), Type 3 : Digital version for ECDIS(NP3). Nautical Publications is essential with nautical charts as reference information to navigate. Development of digital nautical publications is needed for liaison with the chart production system, up-to-dateness of hydrographic information, improvement of service. But, Korean status is positioned in NP1. In our study, we surveyed the present status of nautical publications for development strategy of digital nautical publications. We build database of south coast of sailing direction, develop a manager program, convert the contents to KML( Keyhole Markup Language), develop a user program.
Proceedings of the Korean Institute of Navigation and Port Research Conference
/
2009.06a
/
pp.65-68
/
2009
A Nautical Publication is a special purpose book, or a specially compiled database, that is issued officially by or on the authority of a Government, authorized Hydrographic Office or other elevant ogvernment institution and is designed to meet the requirements of marine navigation Nautical publications include list of lights, Buoys, Beacons, Radio Siganals, Sailing directions. The SNPWG(Standardization Nautical Publications Working Group) from the IHO is working to implement in computer systems all those elements of interest for Hydrography and Navigation Concerning the nautical publications digitization process, the SNPWG has defined three types of nautical publication: Type 1 : Hard copy(NP1), Type 2 : Digital version, A slight modification of type 1(NP2), Type 3 : Digital version for ECDIS(NP3). Nautical Publication is essential with nautical charts as refrerence information to navigation. Development of digital nautical publication is needed for liaison with charts production system, up-to-dateness of hydrographic information, improvement of service. But, korea's status is positioned in NP1. In our study, we surveyed the present status of nautical publciation for strategy of digital nautical publication development. Also, we build database of south coast of sailing direction and develp a program for compilation and management of sailing direction.
Journal of the Korea Institute of Information and Communication Engineering
/
v.17
no.1
/
pp.166-174
/
2013
QRS detection of ECG is the most popular and easy way to detect cardiac-disease. But it is difficult to analyze the ECG signal because of various noise types. The important problem in recording ECG signal is a baseline wandering, which is occurred by rhythm of respiration and muscle contraction attaching to an electrode. Particularly, in the healthcare system that must continuously monitor people's situation, it is necessary to process ECG signal in realtime. In other words, the design of algorithm that exactly detects QRS region using minimal computation by analyzing the person's physical condition and/or environment is needed. Therefore, baseline wander removing method based on morphological filter for efficient QRS detection method is presented in this paper. For this purpose, we detected QRS through the preprocessing method using morphological filter, adaptive threshold, and window. The signal distortion ratio of the proposed method is compared with other filtering method. Also, R wave detection is evaluated by using MIT-BIH arrhythmia database. Experiment result show that proposed method removes baseline wanders effectively without significant morphological distortion.
Obtaining delivery addresses from calls is one of the most important processes in TV home shopping business. By automating this process, the operational efficiency of TV home shopping can be increased. In this paper, a method of recognizing and validating road name address, which is the address system of South Korea, from speech oriented text is proposed. The speech oriented text has three challenges. The first is that the numbers are represented in the form of pronunciation. The second is that the recorded address has noises that are made from repeated pronunciation of the same address, or unordered address. The third is that the readability of the resulted address. For resolving these problems, the proposed method enhances the existing address databases provided by the Korea Post and Ministry of the Interior and Safety. Various types of pronouncing address are added, and heuristic rules for dividing ambiguous pronunciations are employed. And the processed address is validated by checking the existence in the official address database. Even though, this proposed method is for the STT result of the address pronunciation, this also can be used for any 3rd party services that need to validate road name address. The proposed method works robustly on noises such as positions change or omission of elements.
This study analyzes the status of the designated administrative meetings of the central administrative agencies, including the number of meetings, the presence of written minutes, and the form of minutes. The implications based on the analysis are as follows. First, there were meetings that were not held, and written meetings were held. The standards for determining the designated meetings should be established. Second, when only a written meeting was held, the minutes were not made because these were not written separately. A written meeting can be held, if it is necessary. However, there is still a need to keep a detailed record similar to minutes in such cases. Third, among the minute types, a written record of the points of the meeting is preferred. Even if the meeting is closed for proper reasons, making a transcript and a record in addition to writing the points must be settled. Finally, specific standards for the procedures and reasons why meetings and minutes should be closed should be established. It is necessary to change the paradigm from the viewpoint of production and management to the viewpoint of disclosure and sharing through the improvement of standards and procedures related to designated meetings and designated meeting minutes.
This study was conducted on 238 dental hygienists working in Daegu and Gyeongbuk area. In order to understand the status of harmful transmission of dental materials by type of work, we compared the differences in exposure time and work environment characteristics of hospital types and investigated the difference in the degree of recognition of material safety data. The results of the study were as follows: In case of hospitals, the exposure time of dust generated from chemicals was the longest. Resin filling, contact with disinfectant. 37 workers (29.4%) and 14 workers (12.5%) answered that they perceive the question about whether they are aware of the material safety data sheet (MSDS) for dental materials. There were 18 hospital workers and 6 clinic workers who had experience reading MSDS before using dental materials. The respondents who answered that they provided the material safety data of the dental materials used had a 2.39 times MSDS in hospital workers. Therefore, by recognizing the health hazards of chemical substances in accordance with the characteristics of each type of hospital and continuing to conduct health and safety education, the work environment should be improved by establishing proper recognition of MSDS information. It suggests the necessity of a system that can strengthen the management of chemical information provision and guarantee the strategic approach and workers' right to know.
Predicting a company's financial bankruptcy is traditionally one of the most crucial forecasting problems in business analytics. In previous studies, prediction models have been proposed by applying or combining statistical and machine learning-based techniques. In this paper, we propose a novel intelligent prediction model based on the simulated annealing which is one of the well-known optimization techniques. The simulated annealing is known to have comparable optimization performance to the genetic algorithms. Nevertheless, since there has been little research on the prediction and classification of business decision-making problems using the simulated annealing, it is meaningful to confirm the usefulness of the proposed model in business analytics. In this study, we use the combined model of simulated annealing and machine learning to select the input features of the bankruptcy prediction model. Typical types of combining optimization and machine learning techniques are feature selection, feature weighting, and instance selection. This study proposes a combining model for feature selection, which has been studied the most. In order to confirm the superiority of the proposed model in this study, we apply the real-world financial data of the Korean companies and analyze the results. The results show that the predictive accuracy of the proposed model is better than that of the naïve model. Notably, the performance is significantly improved as compared with the traditional decision tree, random forests, artificial neural network, SVM, and logistic regression analysis.
The Journal of Korea Institute of Information, Electronics, and Communication Technology
/
v.12
no.4
/
pp.380-386
/
2019
In this paper, in order to compare the mixing ratio according to the feeding method, the input error of the main material and the sub material was measured and analyzed for 100 cycles using raw material having the same viscosity. As a result of the piston pump method, the input error of main material and sub material varied greatly from 0g to 3g, and the maximum error ratio was 10.3%. In the dual-screw rotation method, the input error varied from 0.01g to 0,4g, and the maximum error ratio was 0.41%, and almost no input error occurred. As the process cycle increased, it was found that the feed was almost uniform. The dual-screw rotary two-component mixing system was used to measure and analyze the inputs of the main and sub materials for 100 using three types of liquid silicones with different viscosities of the raw materials. As a result, the average error was 0.75g and the error rate was less than 1% regardless of the viscosity of the applied raw materials. When rae materials having the same viscosity were used, the average error ratio of the piston pump method was 4.09%.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.