• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.197-202
• /
• 2005

Current Optical Disk drive is dominating high share gradually in information storage device market through development of great skill. These technologies can achieve not only improvement of transmission speed but also elevation of recording/reproduction technology. However, these present state cause not only the increase of vibration in structural viewpoint but also problem of serious noise while the ODD becomes high speed/high performance. Specially, air-born noise is being bigger than structural-born noise as disk rotation speed increases gradually. The object of this research is that reduce the air-born noise in optical disk drive by reducing a quantity of flow by using a miniaturized muffler. The micro muffler is a miniaturized muffler. The muffler is used widely by solution to reduce air-born noise which is generated by flow. According to frequency band of the noise source, it can be applied by muffler of various forms. In this research, we examined the noise characteristics of the micro muffler and applied it by noise reduction solution of the ODD. It could get an excellent noise reduction in high frequency band by using the micro muffler than the opened case through the decrease of an inner flow. But it could not get a noise reduction in low frequency band through the decrease of an inner flow.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.4
• /
• pp.160-166
• /
• 2007

In this paper, the measured electrical resistance method is proposed to analyze the ramp-tab contact during the load/unload (L/UL) process. Since this method supplies the voltage change due to the resistance change, we can easily and conveniently identify the ramp-tab contact from the acoustic emission (AE) signal. At first, we carefully deposit the conductive material on the surface of the conventional ramp by sputtering method. The ratio frequency (RF) magnetron co-sputtering system is applied to accomplish the deposited double-layers on the ramp surface. One layer is the stainless steel for the conductive layer and the other is the titanium layer for the cohesive function between the ramp surface and the stainless steel layer. In order to guarantee the stiffness and damping properties of the original ramp, the deposited conductive layer is intended to have very thin thickness. After integration the proposed ramp device into the L/UL system and networking the electrical resistance circuit, the L/UL performance is experimentally evaluated by comparing the measured electrical resistance signal and AE signal.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.4
• /
• pp.51-60
• /
• 2005

The riles or intellectual property on computer systems have increasingly been exposed to such threats that they can be flowed out by internal users or outer attacks through the network. The File Outflow Monitoring System monitors file outflows at server by making the toe when users copy files on client computers into storage devices or print them, The monitoring system filters I/O Request packet by I/O Manager in kernel level if files are flowed out by copying, while it uses Win32 API hooking if printed. As a result, it has exactly made the log and monitored file outflows, which is proved through testing in Windows 2000 and XP.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1511-1518
• /
• 2007

As studies on ubiquitous computing are actively conducted, desire for various services, including image transmission storage, search and remote monitoring. has been expanding into mobile environment as well as to PCs. while CCTV (closed circuit TV) and un DVR (Digital video Recording) are used in places where security service such as intrusion detection system is required, these are high-end equipment. So it is not easy for ordinary users or household and small-sized companies to use them. Besides, they are difficult to be carried and camera solution for mobile device does not support high-quality function and provides low-definition of QVGA for picture quality. Therefore, in this study, design and implementation of embedded system of high-definition image transmission for ubiquitous mobile device which is not inferior to PC or DVR are described. To this end, usage of dedicated CPU for mobile device and design and implementation of MPEG-4 H/W CODEC also are examined. The implemented system showed excellent performance in mobile environment, in terms of speed, picture quality.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.197-203
• /
• 2014

The safety and arming device(SAD), one of the components of the fuzes, shall provide safety that is consistent with handling, storage, transportation, use, and disposal. In this paper, we describes the design of the SAD which includes the solenoid assembly and the solenoid driving circuit to improve the safety of the fuzes. The solenoid assembly consists of a coil assembly, a restoring spring, and a core. The solenoid assembly is added in the SAD as an additional safety device. In case of the normal circumstances, the core of the solenoid assembly restrains the $1^{st}$ and $2^{nd}$ safety devices of the SAD for those devices not to operate at all, so that the SAD can secure safety for storage, transportation, and use. In contrast, when the battery power is provided to the solenoid driving circuit just before the flight, the core confirms the power level and starts removing the restraint from the $1^{st}$ and $2^{nd}$ safety devices of the SAD, and then the SAD is able to change its mode from safety mode to armed mode. After firing, once the SAD's operations complete, the turned-on arming switch stops providing the power to the solenoid assembly automatically. It can reduce the power consumption at solenoid assembly. Therefore, the proposed solenoid driving circuit for the solenoid assembly not only unlocks the restrained solenoid assembly from the safety devices, but also saves the power consumption during the flight.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.2
• /
• pp.247-251
• /
• 2010

Using SCM in storage systems introduce new potentials for improving I/O performance and reliability. In this paper, we study the use of SCM as a buffer cache that guarantees transactional unit writes. Our proposed method can improve storage system reliability and performance at the same time and can recover the storage system immediately upon a system crash. The Proposed method is based on the LINUX JBD(Journaling Block Device), thus reliability is equivalent to JBD. In our experiments, the file system that adopts our method shows better I/O performance even while guaranteeing high reliability and shows fast file system recovery time (about 0.2 seconds).

• Journal of KIISE
• /
• v.42 no.4
• /
• pp.427-433
• /
• 2015

The rapid advancement of computing technology has triggered the need for fast data I/O processing and high-performance storage technology. Next generation memory technology, which we refer to as new memory, is anticipated to be used for high-performance storage as they have excellent characteristics as a storage device with non-volatility and latency close to DRAM. This research proposes NTL (New memory Translation layer) as a technology to make use of new memory as storage. With the addition of NTL, conventional I/O is served with existing mature disk-based file systems providing compatibility, while new memory I/O is serviced through the NTL to take advantage of the byte-addressability feature of new memory. In this paper, we describe the design of NTL and provide experiment measurement results that show that our design will bring performance benefits.

• Journal of KIISE
• /
• v.42 no.1
• /
• pp.7-14
• /
• 2015

Storage Class Memory(SCM) has been considered as a next-generation storage device because it has positive advantages to be used both as a memory and storage. However, there are significant problems of data consistency in recently proposed file systems for SCM such as insufficient data consistency or excessive data consistency-control overhead. This paper proposes a novel data consistency-control scheme, which changes the write mode for log data depending on the modified data ratio in a block, using a rollback-recovery scheme instead of the Write Ahead Logging (WAL) scheme. The proposed scheme reduces the log data size and the synchronization cost for data consistency. In order to evaluate the proposed scheme, we implemented our scheme on a Linux 3.10.2-based system and measured its performance. The experimental results show that our scheme enhances the write throughput by 9 times on average when compared to the legacy data consistency control scheme.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.1
• /
• pp.179-187
• /
• 2019

With the recent development of small computing devices, IoT sensor network can be widely deployed and is now readily available with sensing, calculation and communi-cation functions at low cost. Sensor data management is a major component of the Internet of Things environment. The huge volume of data produced and transmitted from sensing devices can provide a lot of useful information but is often considered the next big data for businesses. New column-wise compression technology is mounted to the large data server because of its superior space efficiency. Since sensor nodes have narrow bandwidth and fault-prone wireless channels, sensor-based storage systems are subject to incomplete data services. In this study, we will bring forth a short overview through providing an analysis on IoT sensor networks, and will propose a new storage management scheme for IoT data. Our management scheme is based on RAID storage model using column-wise segmentation and compression to improve space efficiency without sacrificing I/O performance. We conclude that proposed storage control scheme outperforms the previous RAID control by computer performance simulation.

• Journal of Digital Forensics
• /
• v.12 no.3
• /
• pp.55-70
• /
• 2018

With the diversification of mobile devices, the development of web technologies, and the popularization of the cloud, an internet-centric web OS that is not dependent on devices has become necessary. Chromebooks are mobile devices in the form of convertible laptops featuring a web OS developed by Google. These Web OS mobile devices have advantages of multi-user characteristics of the same device and storage and sharing of data through internet and cloud, but it is easy to collect and analyze evidence from the forensic point of view because of excellent security and easy destruction of evidence not. In this paper, we propose an evidence collection procedure and an analysis method considering the cloud environment by dividing the Chromebook, which is a web OS mobile device popularized in the future, into user and administrator modes.