• Atmosphere
• /
• v.26 no.3
• /
• pp.461-471
• /
• 2016

A quality check algorithm for the Weather Information Service Engine pulsed Doppler wind lidar is developed from a view point of spatial and temporal consistencies of observed wind speed. Threshold values for quality check are determined by statistical analysis on the standard deviation of 3-component of wind speed obtained by a wind lidar, and the vertical gradient of horizontal wind speed obtained by a radiosonde system. The algorithm includes carrier-to-noise ratio (CNR) check, data availability check, and vertical gradient of horizontal wind speed check. That is, data sets whose CNR is less than -29 dB, data availability is less than 90%, or vertical gradient of horizontal wind speed is less than $-0.028s^{-1}$ or larger than $0.032s^{-1}$ are classified as 'doubtful', and flagged. The developed quality check algorithm is applied to data obtained at Bucheon station for the period from 1 to 30 September 2015. It is found that the number of 'doubtful' data shows maxima around 2000 m high, but the ratio of 'doubtful' to height-total data increases with increasing height due to atmospheric boundary height, cloud, or rainfall, etc. It is also found that the quality check by data availability is more effective than those by carrier to noise ratio or vertical gradient of horizontal wind speed to remove an erroneous noise data.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.63-63
• /
• 2003

The aim of this study is to apply and verify of Bayesian probability model, the likelihood ratio and statistical model, at Janghung, Korea, using a Geographic Information System (GIS). Landslide locations were identified in the study area from interpretation of IRS satellite images, field surveys, and maps of the topography, soil type, forest cover, geology and land use were constructed to spatial database. The factors that influence landslide occurrence, such as slope, aspect and curvature of topography were calculated from the topographic database. Texture, material, drainage and effective soil thickness were extracted from the soil database, and type, diameter and density of forest were extracted from the forest database. Land use was classified from the Landsat TM image satellite image. As each factor's ratings, the likelihood ratio coefficient were overlaid for landslide susceptibility mapping, Then the landslide susceptibility map was verified and compared using the existing landslide location. The results can be used to reduce hazards associated with landslides management and to plan land use and construction.

• Journal of Digital Contents Society
• /
• v.13 no.3
• /
• pp.451-457
• /
• 2012

Recently, as the use of real time traffic information of a car navigation system increases rapidly with the development of Intelligent Transportation Systems (ITS), path search is getting more important. Previous algorithms, however, are mostly for the shortest distance searching and provide route information using static distance and time information. Thus they could not provide the most optimal route at the moment which changes dynamically according to traffic. Accordingly, in this study, Semantic Shortest Path algorithm with Reduction ratio & Distance(SSP_RD) is proposed to solve this problem. Additionally, a routing model based on velocity reduction ratio and distance and a dynamic route link map are proposed.

• Journal of the Korean Society for Library and Information Science
• /
• v.21
• /
• pp.249-290
• /
• 1991

Theoretical developments in the information retrieval have offered a number of alternatives to traditional Boolean retrieval. Probability theory and fuzzy set theory have played prominent roles here. Fuzzy set theory is an attempt to generalize traditional set theory by permitting partial membership in a set and this means recognizing different degrees to which a document can match a request. In this study, an experimentation of a document retrieval system using the fuzzy relation matrix of the keywords is described and the results are offered. The queries composed of keywords and Boolean operaters AND, OR, NOT were processed in the retrieval method, and the method was implemented on the PC of 32bit level (30 MHz) in an experimental system. The measurement of the recall ratio and precision ratio verified the effectiveness of the proposed fuzzy relation matrix of keywords and retrieval method. Compared to traditional crisp method in the same document database, the recall ratio increased $10\%$ high although the precision ratio decreased slightly. The problems, in this experiment, to be resolved are first, the design of the automatic data input and fuzzy indexing modules, through which the system . can have the ability of competition and usefulness. Second, devising a systematic procedure for assigning fuzzy weights to keywords in documents and in queries.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.146-151
• /
• 2016

In this paper, we present a method for estimating the ratio of CPA distance to velocity of underwater target using target bearing information in CPA situation. This ratio can be estimated by previous research which is Envelope CPA using proximity sensor but it has low performance if the target is close to receiver sensor or bigger interference caused by multi-path effects. Therefore we propose a Bearing CPA technique using a target bearing information as a way to overcome.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.4
• /
• pp.563-572
• /
• 2011

Reliability is an essential factor in a navigation system. Therefore, an integrity monitoring system is considered one of the most important parts in an avionic navigation system. A fault due to systematic malfunctioning definitely requires integrity reinforcement through systematic analysis. In this paper, we propose a method to detect faults of the GPS signal by using a distributed nonlinear filter based probability test. In order to detect faults, consistency is examined through a likelihood ratio between the main and auxiliary particle filters (PFs). Specifically, the main PF which includes all the measurements and the auxiliary PFs which only do partial measurements are used in the process of consistency testing. Through GPS measurement and the application of the autonomous integrity monitoring system, the current study illustrates the performance of the proposed fault detection algorithm.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.1
• /
• pp.40-47
• /
• 2013

By virtue of Rec. ITU-R P.1546 and geography information system, interference analysis for the fixed wireless system and radar has been presented based upon the frequency-distance rules with minimum coupling loss, and a comprehensive methodology for assessing interoperability between systems was examined in terms of received signal, protection ratio, frequency dependent rejection. Also to find the antenna gain from a discrimination angle, a useful S-I plane was introduced based on signal and interference vectors derived from the real map with geographic information. To show some computational results, geography information on the map was taken for the given area, and field strength and path profile were illustrated for the radar and fixed wireless system operating at 2.7 GHz, for convenience. In addition the interference effect of receiver was also checked as a function of radar beam direction including protection ratio and frequency dependent rejection. The developed interference analysis can be actually applied to evaluate interoperability for wireless systems in the VHF and UHF bands.

• Journal of the Korean earth science society
• /
• v.26 no.2
• /
• pp.114-128
• /
• 2005

Fuzzy information representation of multi-source spatial data is applied to landslide hazard mapping. Information representation based on frequency ratio and non-parametric density estimation is used to construct fuzzy membership functions. Of particular interest is the representation of continuous data for preventing loss of information. The non-parametric density estimation method applied here is a Parzen window estimation that can directly use continuous data without any categorization procedure. The effect of the new continuous data representation method on the final integrated result is evaluated by a validation procedure. To illustrate the proposed scheme, a case study from Jangheung, Korea for landslide hazard mapping is presented. Analysis of the results indicates that the proposed methodology considerably improves prediction capabilities, as compared with the case in traditional continuous data representation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.2
• /
• pp.86-102
• /
• 2012

For predictive flooded area susceptibility mapping, this study applied and verified probability model and the frequency ratio using a geographic information system (GIS) and frequency raio. Flooded areas were identified in the study area of field surveys, For predictive flooded area susceptibility mapping, this study applied and verified probability model and the frequency ratio using a geographic information system (GIS) and frequency raio. Flooded areas were identified in the study area of field surveys, and maps of the topography, geology, landcover and green infrastructure were constructed for a spatial database. The factors that influence flooded areas occurrence, such as slope gradient, slope, aspect and curvature of topography and distance from darinage, were calculated from the topographic database. Lithology and distance from fault were extracted and calculated from the geology database. The frequency ratio coefficient is overlaid for flooded areas susceptibility mapping as each factor's ratings. Then the flooded areas susceptibility map was verified and compared using the existing flooded areas. As the verification results, the frequency ratio model showed 82% in prediction accuracy. The method can be used to reduce hazards associated with flooded areas and to plan land use.

• Journal of Mechanical Science and Technology
• /
• v.16 no.7
• /
• pp.873-881
• /
• 2002

In this paper, a on-line estimation method of the radial immersion angle using cutting force is presented. The ratio of cutting forces in feed and cross-feed directions acting on the single tooth at the immersion angle is a function of the immersion angle and the ratio of radial to tangential cutting force. It is found that the ratio of radial to tangential cutting force is not affected by cutting conditions and axial rake angle, which implies that the ratio determined by one preliminary experiment can be used regardless of the cutting conditions for a given tool and workpiece material. Using the measured cutting force during machining and predetermined ratio, the radial immersion ratio is estimated in process. Various experimental results show that the proposed method works within 5% error range.