• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.317-321
• /
• 2013

Due to growth of electronics and control devices, automation and situational awareness systems have been applied by automobile. Vision systems with the introduction of unmanned system were being actively developed. In this paper, the distortion in the 7-inch LCD screen for the treatment process are divided into Online and Offline processing. Offline processing based on the image signal processing and for generating LUT Online to Offline generated by processing the distortion is applied to the LUT. LUT is applied to distort the image processing in real time, so that distortion correction is made for the purpose of setting.

• 전자공학회논문지B
• /
• 제33B권7호
• /
• pp.107-115
• /
• 1996

The average distortio of the vector quantizer is calcualted using a probability function F of the input source for a given codebook. But, since the input source is unknown in geneal, using the sample vectors that is realized from a random vector having probability function F, a time-average opeation is employed so as to obtain an approximation of the average distortion. In this case the size of the smple set should be large so that the sample vectors represent true F reliably. The theoretical inspection about the approximation, however, is not perfomed rigorously. Thus one might use the time-average distortion without any verification of the approximation. In this paper, the convergence characteristics of the time-average distortions are theoretically investigated when the size of sample vectors or the size of codebook gets large. It has been revealed that if codebook size is large enough, then small sample set is enough to obtain the average distortion by approximatio of the calculated tiem-averaged distortion. Experimental results on synthetic data, which are supporting the analysis, are also provided and discussed.

• 정보처리학회논문지B
• /
• 제10B권4호
• /
• pp.373-380
• /
• 2003

대부분의 저가형 디지털 카메라에 사용되는 광학계의 경우 상대적으로 심한 렌즈 왜곡을 보이고 있다. 본 연구의 목적은 렌즈의 기하학적 왜곡에 의한 영상 품질의 저하를 보정하려는 것으로 Tsai의 카메라 캘리브레이션 방법을 단순화한 렌즈 왜곡 변수 계산 방법 및 계산된 렌즈 왜곡 변수를 이용하여 왜곡된 원영상을 이미지 워핑을 통해 보정하는 방법을 제안한다. 렌즈 왜곡 변수 계산 단계에서는 카메라 캘리브레이션 과정의 단순화를 위해 scale factor ratio 및 이미지 센터를 처리하는 실질적인 방식에 대해 보고하며 정량적인 이미지 품질 척도를 이용하여 왜곡보정 효과를 측정함으로써 제안된 방법의 타당성을 보인다. 한편, 렌즈 왜곡 변수 계산 단계에서의 결과를 바탕으로 이미지 워핑을 적용하기 위해 역공간 매핑 방식을 적용하는 경우 본 연구에서 적용된 방사상 렌즈 왜곡 모델의 정확한 해를 구하기 위해서는 3차 방정식의 해를 구하여야 한다. 본 논문에서는 정보기기로의 내장형 구현에 필수적인 실시간 처리를 목적으로 2차 방정식으로의 근사화 방법을 제안한다. 실험을 통하여 제안된 근사화 방법의 실시간 구현 가능성을 보이며 아울러 3차 방정식의 해를 이용한 이미지 워핑의 경우와 성능이 동등함을 보인다.

• 전력전자학회논문지
• /
• 제18권2호
• /
• pp.161-168
• /
• 2013

This paper presents an algorithm of a compensation of the grid current distortion caused by the grid voltage unbalance and distortion in 3-phase bi-directional DC to AC inverter. Usually 3-phase grid system has unbalance and distortion because of connecting 1-phase and non-linear load with 3-phase load using same input node. Controlling 3-phase inverter by general method under the unbalanced and distorted grid voltage, the grid current has distortion. This distortion of the grid current cause the grid voltage distortion again. So, it need to control the grid current balanced and non-distorted, even the grid voltage gets unbalanced and distorted. There are some complex method to compensate the gird current distortion. it suggest simple method to solve the problem. Simulation and experiment is used to validate the proposed algorithm.

• 센서학회지
• /
• 제19권5호
• /
• pp.375-384
• /
• 2010

In this paper, we proposed a new shaft distortion correction system having an adaptive PID controller using displacement sensors, which is adaptively reflecting variations of shaft strength owing to irregular heat treatment during an annealing process and sensitivity to the seasonal temperature changes. Generally, the shafts are annealed by heat treatment in order to enlarge the strength of the shaft, which causes an distortion of a shaft such as irregular bending of the shaft. In order to correct such a distortion of the shaft, a mechanical pressure is properly impacted to the distorted shaft. However, the strength of every shaft is different from each other owing to irregular annealing and seasonal temperature changes. Especially, the strength of a thin shaft such as a car transmission shaft is much more sensitive than that of a thick shaft. Therefore, it is very important for considering the strength of each shaft during correction of the car transmission shaft distortion in order to generate proper mechanical pressure. The conventional PID controller for the shaft distortion correction system does not consider each different strength of each shaft, which causes low productivity. Therefore, we proposed a new PID controller considering variations of shaft strength caused by seasonal temperature changes as well as irregular heat treatment and different cooling time. Three displacement sensors are used to measure a degree of distortion of the shaft at three different location. The proposed PID controller generates adaptively different coefficients according to different strength of each shaft using appropriately obtained pressure times from long-term experiments. Consequently, the proposed shaft distortion correction system increases the productivity about 30 % more than the conventional correction system in the real factory.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권1호
• /
• pp.257-271
• /
• 2016

The Structural SIMilarity (SSIM) index is one of the most widely-used methods for perceptual image quality assessment (IQA). It is based on the principle that the human visual system (HVS) is sensitive to the overall structure of an image. However, it has been reported that indices predicted by SSIM tend to be biased depending on the type of distortion, which increases the deviation from the main regression curve. Consequently, SSIM can result in serious performance degradation. In this study, we investigate the aforementioned phenomenon from a new perspective and review a constant that plays a big role within the SSIM metric but has been overlooked thus far. Through an experimental study on the influence of this constant in evaluating images with SSIM, we are able to propose a new solution that resolves this issue. In the proposed IQA method, we first design a system to classify different types of distortion, and then match an optimal constant to each type. In addition, we supplement the proposed method by adding color perception-based structural information. For a comprehensive assessment, we compare the proposed method with 15 existing IQA methods. The experimental results show that the proposed method is more consistent with the HVS than the other methods.

• Journal of electromagnetic engineering and science
• /
• 제9권2호
• /
• pp.71-77
• /
• 2009

OFDM(Orthogonal Frequency Division Multiplexing) signals sutler serious nonlinear distortion in the nonlinear HPA(High Power Amplifier) because of high PAPR(Peak Average Power Ratio). Nonlinear distortion can be improved by a pre-distorter, but this pre-distorter is insufficient when the PAPR is very high in an OPFDM system. In this paper, a DFT(Discrete Fourier Transform) transform technique is introduced for PAPR reduction. It is especially important to consider the memory effect of HPA for more precise predistortion. Therefore, in this paper, we consider two models, the TWTA(Traveling-Wave Tube Amplifier) model of Saleh without a memory effect and the HPA memory polynomial model that has a memory effect. We design a pre-distorter and an adaptive pre-distorter that uses the NLMS(Normalized Least Mean Square) algorithm for the compensation of this nonlinear distortion. Without the consideration of a memory effect, the system performance would be degraded, even if the pre-distorter is used for the compensation of the nonlinear distortion. From the simulation results, we can confirm that the proposed system shows an improvement in performance.

• 한국통신학회논문지
• /
• 제34권11B호
• /
• pp.1320-1327
• /
• 2009

카메라 간격, 정렬 방법 그리고 검출기의 분해능은 관찰자가 재생된 입체영상의 깊이감을 인지할 시 발생하는 깊이감 왜곡의 주된 요인들이다. 스테레오 카메라를 사용하여 시차영상을 획득할 시 고려해야 할 요소는 물체거리의 변화에 따른 상거리의 변화이다. 상거리의 변화는 시차영상 내 시차량 변화를 야기하며, 재생시 관찰자에게 왜곡된 깊이감을 제공한다. 본 논문은 상거리 변화에 따른 시차영상 내 시차량 변화 및 이로부터 야기되는 깊이감 왜곡을 정량적으로 분석하여, 상거리 변화가 깊이감 왜곡을 발생시키는 또 다른 주된 요인이 될 수 있음을 증명 하는데 연구의 초점을 두었다.

• 한국정보통신학회논문지
• /
• 제4권5호
• /
• pp.1085-1093
• /
• 2000

이 논문에서는 객체의 크기, 움직임의 크기, 부호화 왜곡을 기준으로 다중객체간 가용비트를 효과적으로 분배하는 기법을 제안하였다. 세 변수를 이용하여 부호화하는 개념은 MPEG-4에서 다중객체를 부호화하는 데에 이용되었다. 그러나 변수들을 시각적인 관점에서 분석하여 이용하는 연구가 미흡하여 시각적으로 중요하지 않은 객체에 많은 비트가 할당되어 화질이 저하되는 결과를 초래하였다. 따라서 이 논문에서는 객체의 중요성을 세 가지 변수로 표현하고 시각적으로 비교하였다. 크기 및 움직임 정보는 입력 영상에서 미리 주어지고 왜곡량에 따라 비트를 분배하였다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.303-306
• /
• 2009

Registration of microscopic section images from an organism is of importance in analyzing and understanding the function of an organism. Microscopes usually suffer from the radial distortion due to the spherical aberration. In this paper, a correction scheme for the intra-section registration is proposed. The correction scheme uses two corresponding feature points under the radial distortion model. Proposing several variations of the proposed scheme, we extensively conducted experiments for real microscopic images. Iterative versions of the correction from multiple feature points provide good performance for the registration of the optical and scanning electron microscopic images.