• 대한조선학회논문집
• /
• 제41권4호
• /
• pp.30-37
• /
• 2004

Flow characteristics of the inflow ahead of a rotating propeller attached to a container ship model were investigated using a two-frame PIV (Particle Image Velocimetry) technique. Ensemble-averaged mean velocity fields were measured at four different blade phases. The mean velocity fields show the acceleration of inflow due to the rotating propeller and the velocity deficit in the near-wake region. The axial velocity distribution of inflow in the upper plane of propeller is quite different from that in the lower plane due to the thick hull boundary layer. The propeller inflow also shows asymmetric axial velocity distribution in the port and starboard side. As the inflow moves toward the propeller, the effect of phase angle variation of propeller blade on the inflow becomes dominant. In the upper plane above the propeller axis the inflow has very low axial velocity and large turbulent kinetic energy, compared with the lower plane. The boundary layer developed along the bottom surface of stern hull forms a strong shear layer affecting vortex structure of the propeller near-wake.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1590-1597
• /
• 1994

The aerodynamic analysis of a $6{\times}6$ counter-rotating propfan around a missile-like-body has been completed analytically using a frequency domain panel method. The present method requires Fourier transformation of flow field around the propfan in computing the velocities normal to the propfan lifting surfaces. The aerodynamic performance curve is determined by angle of attack and nonuniform inflow conditions. The inflow conditions result from the variations of missile flight speed, angle of attack, propfan location relative to control surfaces and control surface deflection angle. The two cases of propfan location relative to control surface, front and behind, are analyzed and the aerodynamic results are presented.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권4호
• /
• pp.506-513
• /
• 2008

The engine containing a radical injector has been studied to improve the performances of efficiency and to reduce the exhaust emissions recently. The engine is far different from general compression ignition engines or spark ignition engines for the concept of combustion process. The inflow characteristic from main chamber into radical chamber during compression stroke is important because the radical chamber must have enough fresh air to generate appropriate radicals. The numerical simulation is performed in each specific shape and the engine speed by using KIVA code. The result shows that the fresh air inflow from main chamber into the radical chamber is the best at 45 degree of the hole angle.

• Wind and Structures
• /
• 제30권6호
• /
• pp.649-662
• /
• 2020

The existence of a dam has potential effects on the surrounding wind environment especially when it is located in mountainous areas. In this situation, the long-span bridge over the reservoir can easily be exposed to non-uniform incoming flows, affecting its wind-resistance performance. This paper presents a study on the aerostatic stability of such a bridge. Wind tunnel tests were first carried out to investigate the wind environment above a mountainous reservoir. The results show that the angle of attack and the wind speed along the bridge axis show obvious non-uniform characteristics, which is related to the inflow direction. When winds come from the south where the river is winding, the angle of attack varies along the span direction significantly. The finite element model for the bridge was established using ANSYS software, and effects of non-uniform wind loads on the aerostatic stability were computed. Non-uniform angle of attack and wind speed are unfavorable to the aerostatic stability of the bridge, especially the former. When the combined action of non-uniform angle of attack and wind speed is considered, the critical wind speed of aerostatic instability is further reduced. Moreover, the aerostatic stability of the bridge is closely related to the dam height.

• 한국항공우주학회지
• /
• 제39권6호
• /
• pp.498-504
• /
• 2011

속도와 샤프트각 그리고 피치 변화에 따른 토크 평형상태의 자동회전에서 플래핑 거동 특성과 전진비의 변화를 조사하였다. 속도 증가에 따른 압축성 효과를 모사하기 위해 압축성 Navier-Stokes 솔버로 해석된 2차원 데이터를 Pitt/Peters 유도흐름 이론과 함께 사용하였고 토크 평형상태에 대한 세 변수의 조합을 찾기 위해 과도모사법(TSM)을 이용하였다. 토크 평형상태에서 최대 플래핑각을 속도, 샤프트각, 피치와의 관계로 나타내고 전진비 변화와 비교함으로써 후진깃의 역풍영역 확대가 로터의 자동회전 특성에 관여하는 현상을 정성적으로 고찰하였다.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.128-133
• /
• 2011

In the present study, the flow fields in between the propeller and the semi-spade rudder are investigated by using PIV technique to find out the influences of both simulated hull wake and propeller wake on the incident flow to the rudder. The velocity fields are measured at the propeller rotation angle of $180^{\circ}$ and the rudder deflection angles of $0^{\circ}$. Flow fields measured at each rudder deflection angle are analyzed in terms of angle-of-attack against the rudder leading edge. The hull wake increases the angle-of-attack more than that in the uniform inflow condition, forming the angle-of-attack of about $20^{\circ}$ at 0.7R(R=propeller radius) position. The distribution of the angle-of-attack is strongly affected by the stagnation point around the leading edge and camber effect of the rudder. These effects provide asymmetric distribution of angle-of-attack with respect to the leading edge of the rudder.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.57.2-57.2
• /
• 2011

In this study, the effects of shear flows around a 2-dimensional airfoil, S809 on its aerodynamic characteristics were analyzed by CFD simulations. Various parameters including reference inflow velocity, shear rate, angle of attack, and cord length of the airfoil were examined. From the simulation results, several important characteristics were found. Shear rate in a flow makes some changes in the lift coefficient depending on its sign and magnitude but angle of attack does not have a distinguishable influence. Cord length and reference inflow also cause proportional and inversely proportional changes in lift coefficient, respectively. We adopted an analytic expression for the lift coefficient from the thin airfoil theory and proposed a modified form applicable to the traditional load analysis procedure based on the blade element momentum theory. Some preliminary results applied to an well known load simulation software, FAST, are presented.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권6호
• /
• pp.757-764
• /
• 2011

본 연구에서는 폐열회수 발전시스템에 적용가능한 100kW급 구심터빈을 대상으로 베인노즐의 출구각도 변화에 따른 구심터빈의 성능과 내부유동의 영향을 분석하였다. 이를 위해 상용코드를 이용한 3차원 CFD 해석을 수행하였다. 베인노즐 출구각이 커짐에 따라 블레이드 근처 재순환영역은 점차 작아 졌으며, 또한 단면축소효과로 인해 베인노즐 출구끝단 마하수는 1까지 관찰되었다. 본 연구를 통해 분석된 해석결과는 목표출력용 구심터빈의 최적 설계파라미터 구성을 위한 설계자료로 유용하게 활용될 것으로 기대된다.

• 한국해안·해양공학회논문집
• /
• 제32권1호
• /
• pp.17-25
• /
• 2020

본 연구에서는 1 MW급 수평축 조류발전기의 출력 및 유동특성을 분석하기 위해 3차원 레이놀즈 평균 나비어-스톡스 해석을 수행하였다. 난류해석을 위해 SST(shear stress transport) 난류모델을 사용하였고, 유동해석을 위한 계산영역은 육면체격자로 구성하였으며, 최적의 격자 크기를 결정하기 위하여 격자 의존성 시험을 수행하였다. 터빈의 노즈 형상 및 유입각도, 그리고 타워 구조물의 영향을 분석하였다. 노즈 형상의 경우 노즈의 직경 대비 축방향 길이의 비가 증가할수록 터빈 출력이 향상되는 결과를 확인할 수 있었고, 유입각도가 약 15° 이상에서는 터빈의 성능이 약 10% 이상 감소하는 것을 확인하였다. 또한 타워 구조물에 의하여 하류식 터빈의 경우 상류식 터빈에 비하여 성능이 1% 감소함을 알 수 있었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.70-75
• /
• 2001

Intensive experimental investigations were carried out to provide information of the effects of inflow on the rolling characteristics and stability of ships, which becomes great concern in relation to ship's capsizing. A series of systematic experiments have been performed considering the effects cf combined motion of roll-heave-sway and relevant parameters, such as roll angle and period, tank water height etc. To accommodate this type of experiments with 3-degree of freedom of motion, a bench tester has been developed and verified using existing data. Also, theoretical application of anti-roll tank has been incorporated to support the process of investigation. A model of Ro-Ro ships is used in the present study as this type of vessels, as well as fishing vessels, with large open decks, can loose stability rapidly when there is inflow on the decks.