• 제목/요약/키워드: Inflection Point

검색결과 213건 처리시간 0.031초

동맥맥파의 특징점 검출 알고리즘 개선에 관한 연구 (Improvement of a characteristic point detection algorithm of arterial pulse)

  • 전영주;이전;김종열;이낙범;임재중
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.1916-1917
    • /
    • 2007
  • Aortic AIx(augmentation index) has been used to measure aortic stiffness and evaluate ventricular load quantitatively. Algorithm for the detection of augmentation point gradually increases the differential order to detect inflection point rather than detects the distinctive point that appears after a specific time. Developed algorithm for AIx is proved to provide more accurate results than the ones developed by previous studies with the deviation from $-11.5{\pm}14.34$ points to $-3.75{\pm}1.26$ points. Results could provide the basis for the measurement of aortic stiffness using easily-measurable radial artery pulse waves, and could be extended to develop a system for early diagnosis of various vascular diseases.

  • PDF

혼합사로 구성된 하천에서 하상변동 및 유사의 입도분포 계산을 위한 수치모형 개발 (A Numerical Model for Bed Elevation Change and Bed Material Sorting in the Channel of Non-uniform Sediment)

  • 장창래;정관수;김재한
    • 한국수자원학회논문집
    • /
    • 제37권5호
    • /
    • pp.387-395
    • /
    • 2004
  • 본 논문에서는 하상변동 및 유사입자의 시간적 공간적 분포를 동시에 모의할 수 있는 2차원 수치모형을 제시하였다. 사행수로의 하상변동은 만곡부의 외측에서는 하상이 세굴되고 훨씬 더 거친 입경의 재료로 구성되며, 만곡부의 내측에서는 하상이 상승하고, 세립토로 구성되었다. 또한 사행하천에서 흐름의 방향에 대한 입자분포 과정은 상류의 변곡점에서 시작하여, 하류 변곡점에서 마치게 되는 것을 보여주었다. 하천의 경계가 불규칙하고 복잡한 하천에서는 혼합사호 형성된 하천에서보다 균일사로 이루어진 하천에서 하상이 깊게 세굴되는 현상을 보여준다. 혼합사로 이루어진 하천에서의 공간적 입도 분포는 사행하천에서와 마찬가지로 하상이 퇴적되는 사행의 내측에서는 세립토로 구성되고 하상이 세굴되는 외측에서는 굵은 입자로 구성되는 것을 보여주었으며, 하천 폭이 좁은 부분에서는 하상의 세출 및 하상재료가 굵게 변화되는 것을 보여주었다.

NASICON 고체 전해질의 이온 전도도 계산 (II) Na1-Na2 전도 경로에 미치는 mid-Na의 영향 (Computation of Ionic Conductivity at NASICON Solid Electrolytes (II) Effects of mid-Na Sites on Na1-Na2 Conduction Paths)

  • 최진삼;서양곤;강은태
    • 한국세라믹학회지
    • /
    • 제32권11호
    • /
    • pp.1292-1300
    • /
    • 1995
  • The ionic conductivity of NASICON solid electrolytes was simulated by using Monte Carlo Method (MCM). There were included two conduction paths: (1) Na1-Na2 and (2) Na1-Na2 including Na2-Na2. We assumed that mid-Na ions provde an additional driving force for Na mobile ions due to the interionic repulsion between Na1 and Na2 ions. The inflection point of vacancy availability factor, V has been shown at nearby x=2, the maximum mid-Na ions. The inflection point of vacancy availability factor, V has been shown at nearby x=2, the maximum mid-Na sites are occupied. The effective jump frequency factor, V has been shown at nearby x=2, the maximum mid-Na sites are occupied. The effective jump frequency factor, W increased rapidly with the composition at low temperature, but decreased at high temperature region. On Na1-Na2 conduction path, the minimum of charge correlation factor, fc and the maximum of $\sigma$T were appeared at x=2.0. this indicated that mid-Na ions affect on the high ionic conductivity behavior. At the whole range of NASICON composition, 1n $\sigma$T vs. 1/T* plots have been shown Arrhenius behavior but 1n (VWFc) vs. 1/T* have been shown the Arrhenius type tendency at x=2, which mid-Na is being the maximum. The results of MCM agreed with the experimental one when the chosen saddle point value was 6$\varepsilon$ : 3$\varepsilon$. Here the calculated characteristic parameter of materials, K and the phase transition temperature were -4.001$\times$103 and 178$^{\circ}C$ (1/T*=1.92, 1000/T=2.22), respectively.

  • PDF

Error Structure of Technological Growth Models A Study of Selection Techniques for Technological Forecasting Models

  • Oh, Hyun-Seung;Yim, Dong-Soon;Moon, Gee-Ju
    • 품질경영학회지
    • /
    • 제23권1호
    • /
    • pp.95-105
    • /
    • 1995
  • The error structure of nonlinearized technological growth models, such as, the Pearl curve, the Gompertz curve and the Wei bull growth curve, has zero mean and a constant variance over time. Transformed models, however, like the linearized Fisher-Pry model. the linearized Gompertz growth curve, and the linearized Weibull growth curve have increasing variance from t = 0 to the inflection point.

  • PDF

전기 방재를 위한 초고압케이블의 전기 전도 특성 (Electrical Conduction Characteristics of Ultra High Voltage Cable for Prevention of Electrical Fires)

  • 박희두;박하용
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.216-217
    • /
    • 2007
  • In this paper we investigated the volume resistivity and AC conduction current according to the temperature and voltage. As a result, the volume resistivity comes to be small according to the measurement temperature and voltage. AC conduction current of the heat treatment specimen is increased because of the decrease of insulation.

  • PDF

FRP(SMC재)의 균열成長 擧動과 破壞인성 평가에 관한 연구 (A study on fracture toughness evaluation and crack growth behavior in FRP (SMC material))

  • 김정규;박진성
    • 대한기계학회논문집
    • /
    • 제13권3호
    • /
    • pp.472-478
    • /
    • 1989
  • 본 연구에서는 FRP의 파괴인성평가를 위한 기초적인 자료를 얻기 위하여 FRP 중에서도 널리 사용되고 있는 SMC재를 준비하고 3점 굽힘시험을 실시하여 노치선단에서의 손상거동 및 균열진전저항유선으로부터 안정파괴개시점을 검토하였다.

강접골조의 수직 및 수평하중에 대한 근사해석 (Appoximate Analysis of Rigid Frames under Vertical and Lateral Loads)

  • 최철웅;김영찬;강경수
    • 한국강구조학회 논문집
    • /
    • 제13권2호
    • /
    • pp.115-122
    • /
    • 2001
  • 오늘날 컴퓨터가 복잡한 해석을 수행하는 도구로 이용되더라도 해석의 결과값에 대한 적합성을 평가하기 위해서는 공학적 판단이 필요하다. 근사해석법은 이러한 결과값을 검토하기 위한 편리한 도구가 될 수 있으며 골조의 응력분포 그리고 부재 사이즈의 직하중 및 수평하중을 받는 강접골조를 근사해석하기 위한 방법을 제시하는 것이며 본 연구에서 제안한 방법의 유효성을 검증하기 위해서 기존의 방법과 비교하였고 구조물 거동의 예측에 있어서 향상된 결과를 보여주었다.

  • PDF

독일 DLR의 듀얼 벨 노즐 특성 및 핵심 변수 (Characteristics and Key Parameters of Dual Bell Nozzles of the DLR, Germany)

  • 김정훈;허환일
    • 한국항공우주학회지
    • /
    • 제43권11호
    • /
    • pp.952-962
    • /
    • 2015
  • 효율적인 추진기관 개발을 위해 여러 종류의 고도 보정 노즐에 대한 연구가 진행되고 있다. 본 논문에서는 향후 듀얼 벨 노즐 연구를 위한 기초자료로서의 활용을 위해 독일 DLR에서 수행한 연구내용을 바탕으로 듀얼 벨 노즐의 주요 특성을 조사하고 핵심 변수를 도출하였다. DLR은 다양한 실험을 통해 변곡각과 천이 NPR은 비례한다는 것과 확장부 길이와 측하중은 비례하지만 천이 NPR과 천이 지속시간과는 반비례한다는 것을 밝혔다. 성능 예측 과정을 통해 노즐의 형상이 결정될 수 있고 요구 성능에 맞게 변수간의 최적화가 필요하다.

PLZT/PVA 복합재료의 초전특성에 관한 연구 (A Study on Pyroelectric Properties of PLZT/PVA Composite Material)

  • 이응상;최성철;박현;김정욱
    • 한국세라믹학회지
    • /
    • 제27권5호
    • /
    • pp.605-612
    • /
    • 1990
  • In Pb1-xLax(Zry, Tiz)1-x/4O3 system, it selects the composition 7/65/35 (x=7, y=65, z=35) that was reported to have eminent Pyroelectric properties, and that is sintered with PbZrO3+0.3wt.% PbO2 atmosphere powder. From the sintered ceramic and Poly Vinyl Alcohol, the thin wafers are fabricated with 0-3connectivity, and they are researched in Pyroelectric properties and the others according to volume ratio between ceramic and polymer. It was possible to fabricate the film containing ceramic up to 80vol% in PVA polymer. The increment of PLZT ceramic volume fraction improve the pyroelectric coefficient of the composite. On Pyroelectric coefficient and the figure of merit, a little inflection caused by glass point(Tg) of PVA appeared. The degree of inflection is proportioned to the amount of PVA.

  • PDF

초음속 2단 벨노즐(SDBN)을 통하는 유동특성에 관한 연구 (A Study of The Flow Characteristics through a Supersonic Dual Bell Nozzle)

  • 김희동;구병수
    • 한국추진공학회지
    • /
    • 제4권4호
    • /
    • pp.70-77
    • /
    • 2000
  • 초음속 2단벨노즐(SDBN)은 종래의 축소확대형 초음속 노즐의 벽면에 변곡점을 설치하여, 비행체의 고도에 따른 노즐내부의 유동특성을 조절하기 위한 새로운 개념의 추진노즐이다. 본 연구에서는 이러한 SDBN의 유용성과 유동특성을 조사하기 위하여 축대칭 Navier-Stokes 방정식을 유한체적법으로 수치계산하였다. 본 연구의 결과로부터 SDBN의 Base 노즐의 길이는 SDBN 내부에서 발생하는 충격파 시스템에 영향을 미칠 뿐만 아니라, 노즐 유동의 박리위치가 변곡점에 고착되는 넓은 범위의 압력비가 존재한다는 것을 알았다. 또 SDBN의 최대추력은 노즐출구에서 유동이 적정팽창 상태일 때 발생한다는 것을 알았다.

  • PDF