• 한국농공학회지
• /
• 제11권4호
• /
• pp.1827-1831
• /
• 1969

Resulties of research on the capacity of ground water of 994 concrete-pipe-wells and 97 infiltration-gallerys in ground-water-developement-works region executed from March to Julyin 1969, in Choong Chung Nam Do, and research on the quality of ground water for 88 wells for home-use around of River Geum Area, are as fellows: (1) Thickness of aquifer is no more than 2.85m averagely even at river-overflowed plain, alluvial plain and valley plain area that are estimated to contain ground water mostly. And so, it is guessed that ground water capacity is not much especially. (2) Soil of aquifer of the above area is sand or gravel and it is estimated to be good for ground water developement and its mean permeability coefficient is bout $2.5{\times}10^{-3}$(m/sec), and its porosity is about 33.9%. (3) The quality of ground water is good for irrigation water exception of delta plain area. Warm water plan is to need for irrigation water when water temperature is less than 19 degrees below zero. (4) Prospect of ground water developement, judging from quality and quantity, expects to lay infiltration gallery under the ground at river bed in order to utilize under-flow-water of river bed, river-overflowed plain, alluvial plain and valley plain that ground level is less than 50m. (5) Collectable water volume of under-flow-water of river bed is about 450 to $750m^3/day$ to be able to irrigate 3ha to 5ha of the cultivated land in case that infiltration gallery length is 50m and its depth is about 5m. (6) Collectable water volume at river-overflowed plain, alluvial plain and valley plain area, is estimated $150m^3/day$ to be able to irrigated 1ha of the cultivated land.

• 한국방재학회 논문집
• /
• 제4권4호
• /
• pp.27-34
• /
• 2004

본 연구에서는 인공함양법을 적용한 유역에서의 유출특성 변화를 알아보기 위하여 실험유역을 설정하고 각각의 유역에 대하여 실제강우 실험과 강우모의 실험을 실시를 통하여 유출-침투특성을 분석하였다. 실강 우시 유출-침투특성 분석을 위해 2004년 7월 11일${\sim}$7월 17일 사이에 내린 4개의 강우사상에 대하여 분석을 실시한 결과 인공함양유역에서 유출이 발생하는 경우의 유출율 평균은 약 10.61%, 침투율 평균은 89.39%로 파악되어 유출되는 유량의 대부분이 인공함양법 적용에 의해서 침투가 가능한 것으로 나타났으며, 강우모의 실험에서는 강우강도의 변화와 상관없이 1시간의 지속시간을 가지는 60mm/hr ${\sim}$ 100mm/hr 구간에서 유출되는 유량 없이 전량이 침투되는 것으로 나타났다. 그러나, 인공함양시설을 설치한 경우라도 장기간 강우 발생시 주위의 지하수 변화에 의해서 유출이 발생할 수 있으므로 주변의 지하수위에 대한 지속적인 관찰이 요망된다.

• Archives of Reconstructive Microsurgery
• /
• 제16권2호
• /
• pp.63-67
• /
• 2007

This study was designed to introduce free toe tissue transfer using infiltration method of local anesthetic agent. Four toe pulp tissues were transferred to reconstruct finger tip defect in four patients who were not suitable for general anesthesia. Two flaps taken from the lateral side of the great toe was used for reconstruction of thumb defect and two flaps from the medial side of the second toe for resurfacing of the index and fifth finger. Flap sizes were various from $2.0{\times}2.0\;cm^2$ to $1.6{\times}4.0\;cm^2$. Anesthesia was induced by infiltration of 2% lidocaine hydrochloride (with 1:100,000 epinephrine) with dilution of normal saline in same volume unit, as like as in ordinary digital block. All vessels were anastomosed within 2 cm of distance from the proximal margin of the defect. Whole operative procedures were carried out by one team. All flaps were successfully taken without complication. The average operation time was 4 hours 10 minutes. The amount of anesthetic agent used in whole operative procedures was roughly 4 mL in the toe, 8 mL in the finger, and 12 mL totally. In conclusion, free toe tissue transfer using infiltration method of local anesthetic agent would be good strategy for finger tip reconstruction in the patient not suitable for general anesthesia.

• 한국해양환경ㆍ에너지학회지
• /
• 제11권4호
• /
• pp.227-231
• /
• 2008

본 연구에서는 연안사질 조간대에 표착된 기름의 방제를 위한 화학적 방제법의 적용 가능성을 파악하기 위해서 사질 조간대에서 유처리분산제의 살포에 의한 해수침투량의 변화 및 표착유의 거동을 검토하는 것을 목적으로 하여, 모의 조간대 실험장치를 이용하여 실험을 실시하였다. 파도에너지가 비교적 작은 사질 조간대에서 표착된 원유에 의해서 해수의 침투량이 감소되었으나, 분산제를 살포함으로 인해 해수침투량이 약 30% 증가되는 것을 알 수 있었다. 사질 조간대에 표착한 원유는 토양표층 2 cm부분에서 가장 농도가 높은 경향을 나타내었으며, 유화분산제를 살포하였을 경우 침투된 기름이 작은 입자로 분산되어 토양중으로 분산되었다. 따라서 표착된 원유에 분산제를 살포함으로 인해 저서생물의 생존에 필수적인 용존산소, 영양염, 유기물 등의 공급이 회복되어 저서생물에게 생존에 긍정적인 영향을 미칠 것으로 판단된다. 또한 표착된 기름에 유처리분산제를 살포함으로 인해 표착된 기름이 작은 유적으로 분산되어 비 표면적의 증대로 인한 기름분해 미생물의 분해가 촉진되어 표착유의 처리에 효과적일 것으로 사료된다.

• Toxicological Research
• /
• 제24권4호
• /
• pp.273-280
• /
• 2008

The single intratracheal instillation (ITI) of bleomycin (BLM) is a widely used method for inducing experimental pulmonary fibrosis in rat model. In the present study, pulmonary function tests (PFTs) of tidal volume ($V_T$), minute volume ($V_M$), and respiratory frequency ($F_R$) have been applied to study their possibility as a tool to monitor the progress of BLM-induced lung injury in rat model. Rats were treated with a single ITI of BLM (2.5 mg/kg) or saline (control). Animals were euthanized at 3, 7, 14, 21, and 28 days post-ITI. Lung toxicity effects were evaluated by inflammatory cell count, lactate dehydrogenase (LDH) activity in the bronchoalveolar lavage fluid (BALF), and light microscopic examination of lung injury. The PFT parameters were measured immediately before the animals were sacrificed. BLM treatment induced significant cellular changes in BALF-increase in number of total cells, neutrophils, and lymphocytes along with sustained increase in number of macrophages compared to the controls at days 3, 7, and 14. BALF LDH level was significantly increased compared to that in the controls up to day 14. On day 3, infiltration of neutrophils was observed in the alveolar spaces. These changes developed into marked peribronchiolar and interstitial infiltration by inflammatory cells, and extensive thickening of the interalveolar septa on day 7. At 14, 21, and 28 days, mild peribronchiolar fibrosis was observed along with inflammatory cell infiltration. The results of PFT show significant consistencies compared to the results of other toxicity tests. These data demonstrate that the most suitable time point for assessing lung fibrosis in this model is 14 days post-ITI of BLM based on the observation of fibrosis at 14, 21, and 28 days. Further, the progress of lung injury can be traced by monitoring the PFT parameters of $F_R$, $V_T$, and $V_M$.

• 상하수도학회지
• /
• 제23권2호
• /
• pp.181-187
• /
• 2009

In this study, a runoff hydrograph and runoff volume were calculated by using the kinetic wave theory for small urban watersheds based on the concept of low impact development(LID), and the effective imperviousness was estimated based on these calculations. The degree of sensitivity of the effective imperviousness of small watersheds to the impervious to pervious area ratio, infiltration capability, watershed slope, roughness coefficient and surface storage depth was then analyzed. From this analysis, the following conclusions were obtained: The effective imperviousness and paved area reduction factor decreased as the infiltration capability of pervious area increased. As the slope of watersheds becomes sharper, the effective imperviousness and the paved area reduction factor display an increasing trend. As the roughness coefficient of impervious areas increases, the effective imperviousness and the paved area reduction factor tend to increase. As the storage depth increases, the effective imperviousness and the paved area reduction factor show an upward trend, but the increase is minimal. Under the conditions of this study, it was found that the effective imperviousness is most sensitive to watershed slope, followed by infiltration capability and roughness coefficient, which affect the sensitivity of the effective imperviousness at a similar level, and the storage depth was found to have little influence on the effective imperviousness.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.188-191
• /
• 2002

3-D orthogonal woven carbon/Al composites were fabricated using a pressure infiltration casting method. Especially, to minimize geometrical deformation of fiber pattern and $Al_4C_3$ formation, the process parameters of the minimum pressurizing force, melting temperature, delay and holding time of molten aluminum pressurizing was optimized through the PC-controlled monitoring system. Resonant ultrasound spectroscopy (RUS) was utilized to measure the effective elastic constants of 3-D orthogonal woven carbon/Al composites. The CTE measurement was conducted using strain gages in a heating oven.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.58-62
• /
• 2000

The fabrication process and analysis of thermal properties of 50~76vo1% SiCp/Al metal matrix composites(MMCs) for heatsink materials in electronic packaging were investigated. The 50~76vo1% SiCp/Al MMCs fabricated by pressure infiltration casting process showed that thermal conductivities were 85~170W/mK and coefficient of thermal expansion(CTE) were ranged 10~6ppm1k. Specially, the thermal conductivity and CTE of 71vo1%SiCp/Al MMCs were ranged 115~156W/mK and 6~7ppm/K. respectively, which showed a improved thermal properties than the conventional electronic packaging materials such as ceramics and metals.

• Journal of Magnetics
• /
• 제20권2호
• /
• pp.110-113
• /
• 2015

Two kinds of magnetic fluids with different volume fractions are symmetrically filled into the W0.9 photonic crystal waveguide structure. The 2D plane-wave expansion method is used to investigate the slow light properties numerically. The constant group index criterion is employed to evaluate the slow light performance. The wavelength bandwidth ${\Delta}{\lambda}$ centering at ${\lambda}_0=1550nm$ varies from 32.4 to 44.2 nm when the magnetic field factor ${\alpha}_{\parallel}$ changes from 0 to 1. And the corresponding normalized delay bandwidth product can be tuned from 0.221 to 0.258. For comparison and optimization, two infiltration cases are investigated and the more advantageous infiltration scheme is found.

• 생물환경조절학회지
• /
• 제24권2호
• /
• pp.100-105
• /
• 2015

온실의 난방부하 중 틈새환기전열부하 산정방법은 설계 기준마다 제각각이고, 온실의 규모에 따라 각각의 방법에는 큰 차이가 있으므로 보다 정확히 국내에 적용할 수 있는 방법을 정립할 필요가 있다. 본 연구에서는 원예시설의 환경설계 중 난방부하 산정방법 정립에 필요한 기초자료를 제공할 목적으로 다양한 종류의 보온커튼을 설치한 단동 및 연동 플라스틱 온실에서 추적가스법을 이용하여 틈새환기율을 실측하였으며, 온실의 틈새환기 전열부하 산정방법을 검토하였다. 연동온실의 틈새환기율은 $0.042{\sim}0.245h^{-1}$의 범위로 측정되었으며 단동온실의 틈새환기율은 $0.056{\sim}0.336h^{-1}$의 범위로 측정되어 단동온실이 약간 큰 것으로 나타났다. 온실의 틈새환기율은 단동, 연동 구분없이 보온커튼의 층수에 따라 크게 감소하는 것으로 나타났다. 또한 틈새환기율은 온실의 실내외 기온차가 커질수록 증가하는 경향을 보였으나, 실험기간 동안의 낮은 풍속 범위에서 외부 풍속에 따른 틈새환기율의 변화는 일정한 경향을 찾을 수 없었다. 온실의 난방설계를 위한 틈새환기율은 적정 실내외 기온차에서의 값을 제시할 필요가 있고, 최대난방부하 산정의 기준이 되는 낮은 풍속 범위에서 풍속에 따른 틈새환기율의 변화는 고려하지 않아도 되는 것으로 고찰되었다. 다만 강풍지역에서는 열관류율을 포함하여 최대난방부하를 약간 증가시키는 보정계수의 적용이 필요할 것으로 판단되었다. 온실의 틈새환기전열부하 산정방법을 검토한 결과 틈새환기전열계수와 온실의 피복면적을 이용하는 방법은 문제가 있는 것으로 나타났으며, 틈새환기율과 온실의 체적을 이용하는 방법이 합리적인 것으로 판단되었다.