• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1370-1373
• /
• 1993

In controlling a system having many variables to control and multi objectives to satisfy such as a roof crane system, it is often difficult to obtain fuzzy If-Then rules in usual ways. As an alternative, we can more easely obtain rules in such a manner that we obtain each independent group of rules using partial variables for a partial objective. In this case, obtained rules can be conflicting with each other and conventional inference methods cannot handle such rules effectively. In this paper, we propose a roof crane controller with optimal velocity profile generator and a fuzzy logic controller with an inference method suitable for such conflicting rules.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.214-217
• /
• 1993

This paper presents a new identification method which utilizes fuzzy inference in parameter identification. The proposed system has an additional control loop where a real plant is replaced by a plant model. The control system to be designed is to satisfy the following specifications: 1) It has zero steady-state error. 2) It has adequate damping characteristics. 3) 1),2) satisfied, it has a shortest rise-time. Fuzzy rules describe the relationship between comparison results of the features and magnitude of modification in the model parameter values. This method is effective in auto-tuning because the response of the closed loop is verified. The proposed method is tested in simulation for several plants with first- order lags and dead-times. The results show that the proposed method is effective in practical use.

• Journal of information and communication convergence engineering
• /
• 제11권1호
• /
• pp.24-29
• /
• 2013

In this paper, we propose a fuzzy inference model for a navigation algorithm for a mobile robot that intelligently searches goal location in unknown dynamic environments. Our model uses sensor fusion based on situational commands using an ultrasonic sensor. Instead of using the "physical sensor fusion" method, which generates the trajectory of a robot based upon the environment model and sensory data, a "command fusion" method is used to govern the robot motions. The navigation strategy is based on a combination of fuzzy rules tuned for both goal-approach and obstacle-avoidance based on a hierarchical behavior-based control architecture. To identify the environments, a command fusion technique is introduced where the sensory data of the ultrasonic sensors and a vision sensor are fused into the identification process. The result of experiment has shown that highlights interesting aspects of the goal seeking, obstacle avoiding, decision making process that arise from navigation interaction.

• 조명전기설비학회논문지
• /
• 제16권5호
• /
• pp.104-111
• /
• 2002

본 논문에서는 EM(Expectation-Maximization) 알고리즘을 이용한 자동적인 퍼지 규칙생성과 적응 뉴로-퍼지 제어기(Adaptive Neuro-Fuzzy Controller)의 설계를 제안한다. EM 알고리즘은 가우시안 혼합모델(Gaussian Mixture Model)의 최대우도추정(Maximum Likelihood Estimate)을 위해 사용되어지며 본 논문에서는 규칙생성을 위해 클러스터 중심을 추정한다. 추정된 클러스터는 ANFIS(Adaptive Neuro-Fuzzy Inference System)의 퍼지 규칙과 소속함수를 구축하는데 사용되어진다. 시뮬레이션으로 제안된 적응 뉴로-퍼지 제어기의 성능을 입증하기 위해 목욕물 온도 제어 시스템에 대해 다루고 기존 퍼지 제어기에 비해 적은 규칙의 수와 작은 값의 SAE(Sum of Absolute Error)으로 성능개선을 확인하였다.

• 한국산학기술학회논문지
• /
• 제11권6호
• /
• pp.2246-2255
• /
• 2010

본 논문에서는 산업현장에서 통합된 보안관제 시스템을 구축하기 위하여 USN 센서 데이터나 CCTV의 영상으로부터 상황정보를 수집하고 이 상황에 대하여 추론을 할 수 있는 온톨로지 기반의 상황인식 모델에 대하여 기술한다. 상황모델은 스마트 환경에서 자동적이고 이질적인 데이터들을 온톨로지로 표현하고 DL 추론을 통하여 상황을 인식한다. 상황모델을 통합 보안관제 시스템에 적용함으로서 산업현장에서 위험을 자동적으로 검출하여 안전사고를 감소시킬 수 있을 것으로 기대된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권4호
• /
• pp.393-403
• /
• 1997

In this paper, we proposed an optimal identification method of identifying the membership func¬tions and the fuzzy rules for the stabilization controller of the nonlinear system by RVEGA( Real Variable Elitist Genetic Algo rithm l. Although fuzzy logic controllers have been successfully applied to industrial plants, most of them have been relied heavily on expert's empirical knowl¬edge. So it is very difficult to determine the linguistic state space partitions and parameters of the membership functions and to extract the control rules. Most of conventional approaches have the drastic defects of trapping to a local minima. However, the proposed RVEGA which is similiar to the processes of natural evolution can optimize simulta¬neously the fuzzy rules and the parameters of membership functions. The validity of the RVEGA - based fuzzy controller was proved through applications to the stabi¬lization problems of an inverted pendulum system with highly nonlinear dynamics. The proposed RVEGA - based fuzzy controller has a swing -. up control mode(swing - up controller) and a stabi¬lization one(stabilization controller), moves a pendulum in an initial stable equilibrium point and a cart in an arbitrary position, to an unstable equilibrium point and a center of the rail. The stabi¬lization controller is composed of a hierarchical fuzzy inference structure; that is, the lower level inference for the virtual equilibrium point and the higher level one for position control of the cart according to the firstly inferred virtual equilibrium point. The experimental apparatus was imple¬mented by a DT -- 2801 board with AID, D/A converters and a PC - 586 microprocessor.

• 한국산업융합학회 논문집
• /
• 제5권2호
• /
• pp.111-118
• /
• 2002

In GMAW(Gas Metal Arc Welding) processes, bead geometry (penetration, bead width and height) is a criterion to estimate welding quality, Bead geometry is affected by welding current, arc voltage and travel speed, shielding gas, CTWD (contact-tip to workpiece distance) and so on. In this paper, welding process variables were selected as welding current, arc voltage and travel speed. And bead geometry was reasoned from the chosen welding process variables using neuro-fuzzy algorithm. Neural networks was applied to design FLC(fuzzy logic control), The parameters of input membership functions and those of consequence functions in FLC were tuned through the method of learning by backpropagation algorithm, Bead geometry could he reasoned from welding current, arc voltage, travel speed on FLC using the results learned by neural networks. On the developed inference system of bead geometry using neuo-fuzzy algorithm, the inference error percent of bead width was within ${\pm}4%$, that of bead height was within ${\pm}3%$, and that of penetration was within ${\pm}8%$, Neural networks came into effect to find the parameters of input membership functions and those of consequence in FLC. Therefore the inference system of welding quality expects to be developed through proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.277-281
• /
• 1987

This paper describes the development of an expert system for control system designs. Our CACSD expert system consists of 2 parts; one is the knowledge manager and the other is the CACSD package. The knowledge manager contains the inference engine and the control experts' knowledge. The CACSD package consists of the control algorithms used by the knowledge manager. The prototype system of our CACSD expert system is implemented on the IBM PC/AT and the results of tests are given in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.68-68
• /
• 2000

This paper presents a fuzzy modified PID controller that uses linear fuzzy inference method. In this structure, the proportional and derivative gains vary with the output of the system under control. 2-input PD type fuzzy controller is designed to obtain the varying gains. The proposed fuzzy PID structure maintains the same performance as the general-purpose linear PID controller, and enhances the tracking performance over a wide range of input. Numerical simulations and experimental results show the effectiveness of the fuzzy PID controller in comparison with the conventional PID controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.348-348
• /
• 2000

In this paper, we present a fuzzy moving sliding mode control for two-degrree-of-freedom robotic manipulator. 17he sliding surface parameters are designed by fuzzy inference. The proposed sliding mode control makes the error always remain on the surface from beginning and therefore, the system is insensitive to system uncertaintics and external disturbances. Simulation results show the effectiveness of proposed scheme.