• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.1
• /
• pp.102-110
• /
• 2022

This paper proposes a solution to the problems of manufacturing cost and processability by applying discrete material and thickness optimization (DMTO) and minimizing the use of high-strength, lightweight materials in the optimization process. A simple infant pop-up seat model was selected as the application target, and the weight reduction effect and variation in strength according to the optimization results were observed. In this study, a simplified finite element model of an infant pop-up seat frame was first constructed. The model was used to perform a static structural analysis to verify the weight and strength of each part. The D-optimal design of the experimental method was then used to observe the influence of each part on the weight and strength. This process was applied using discrete thickness optimization (DTO) (which applies high-strength, lightweight materials and optimizes only the thickness) and DMTO (which considers both the material and thickness). The DTO and DMTO results were compared to verify the design method that determines the major parts and simultaneously considers the material and thickness. Accordingly, in this study, an optimal lightweight design that satisfied the strength standards of the seat frame was derived. Furthermore, discretization parameters were used to minimize the application of high-strength, lightweight materials.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.3
• /
• pp.93-104
• /
• 2018

It is mandatory to use car seats for infants and children in the private vehicles in accordance with the traffic law of Korea. Recently, legislation has also been proposed to expand the use car seats to express and intercity buses. This reflects a growing consensus that mandatory infant and child car seats, both for private and commercial vehicles, are essential. However, Korean laws concerning infants and children on board aircraft allow parents or guardians to hold children under two years of age on their laps without any restraint devices. It is not possible for a parent to physically restrain an infant or child, especially during a sudden acceleration or deceleration, unanticipated or severe turbulence, or impact. The use of CRS provides an equivalent level of safety to infants and children as that afforded to adult passengers wearing seat belts. But there is no regulation even about Child Restraint Systems on board aircraft in Korea. To enhance their safety, infants and children should be restrained in an approved child restraint system that is appropriate to their weight and height. It is necessary to examine whether infants and children in flight can achieve the same level of safety as an adult.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1293-1300
• /
• 2022

In this paper, research was conducted to prevent various safety accidents that may occur from infant vehicles carrying children and to use infant vehicles easier. In order to prevent the infant vehicle from driving without protection, a brake function is mounted on the infant vehicle wheels using a pressure sensor and a sub motor, and a pressure sensor and an LCD are used to determine whether a seat belt is fastened to prevent the infant from falling from the infant vehicle. In addition, it is designed to turn on the warning light when exceeding a certain temperature and humidity using LCD and LED so that infants can be in a pleasant environment when using a baby vehicle.

• Korean Parent-Child Health Journal
• /
• v.10 no.1
• /
• pp.77-90
• /
• 2007

Purpose: Motor vehicle crashes are the leading cause of death among children younger than 14 years old. The purposes of this study were to 1) provide a basic overview of child safety seats, 2) review car seat safety usage and misuse, 3) suggest interventions to motivate the usage of child safety seats. Method: The design was a descriptive study with literature review. Previous studies were searched of PUBMED, ProQuest and KERIS. Result: Child safety seats and automobile safety belts protect children in a crash if they are used correctly, but if a child does not fit in the restraint correctly, it can lead to injury. A child safety seat should be used until the child correctly fits into an adult seat belt. Conclusion: To improve child passenger's safety, educational, legislational and environmental enforcements are needed: educational interventions to promote use of child safety seats, strengtened legislation to mandate use of child safety seats, establishment of public acquirements.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.195-199
• /
• 2006

According to the United States FMVSS 208, every passenger car on the market after September of 2006 must install a safety system, which can deploy the airbag with different intensity or suppression based on the passenger type, to reduce infant and child injuries from airbag deployments. The Weight Classification System, which has been developed by Hyundai Autonet, is a system that classifies the person occupying the passenger seat. To overcome sensing problems due to the weight sensors small voltage, the Distributed Systems Interface is adopted.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.449-454
• /
• 2004

As social and cultural value has been changed, customers are demanding equipment innovation of passenger quarters to improve the satisfaction of their needs and the level of transfortation culture. To promote the convenience of passenger and abstract the facilities factor of passenger quarters design, this article analyzed and compared with the facilities factor of passenger quarters which have been operated in domestic and foreign country. While domestic passenger quarters is composed of seat, toilet and washroom, foreign passengers quarters consist of various factor such as familly room, infant room, business room, conversation room, and multipurpose room. Especially, foreign passenger quarters have provided passenger with diversity of attachment space, securing movement line for weak person, and arranging infant/child's space.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.59-67
• /
• 1992

The duration of raising seedling of infant rice seedling(IRS) in machine transplanting is 8 to 10 days. This experiment was conducted to investigate the minimum duration of IRS's raising seedling and its method by the combination of several treatments such as plant growth regulator, root-break-seat and temperature. The rice seeds of Hwaseongbyeo was soaked in the solution of metalaxyl for 24 hours at room temperature. Metalaxyl (25% wettable powder), a fungicide, was used in 1, 000 times dilution as a promting substance on the root-mat formation of IRS. The application of fungicide in the nursery soil for the controlling of damping-off and physiologyical seedling rot was omitted due to the metalaxyl seed-soaking treatment. Seeding rate was 220g per seed tray (30$\times$60$\times$3cm). To promote the root-mat formation of IRS, the sheets of polyethylene vinyl and absorptive paper were placed bottom the seed tray. The root-mat formation of IRS was promoted at higher temperature and longer duration of raising seedling. The metalaxyl-treated seeds markedly increased the root length and rooting activity of IRS as compared with the control, thus the root-mat formation was excellent. The absorptive paper with polyethylene vinyl as root-break-seat showed a better root-mat formation compared with control, polyethylene vinyl, alone. The minimum duration of raising seedling of IRS was 5 days after sowing based on the root-mat formation and seedling height under the condition of metalaxyl seed treatment, absorptive paper with polyethylene vinyl as a root-break-seat and the raising seedling temperature 30/2$0^{\circ}C$ (day /night).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1379-1386
• /
• 2023

In this paper, research was conducted to prevent various safety accidents that may occur from infant carriages carrying children and to make the use of infant carriages easier. In order to prevent the baby car from running without protection, a brake function is installed on the baby car wheels using a pressure sensor and a servo motor. Then, a pressure sensor and LCD are used to determine whether the seat belt is fastened to prevent the child from falling out of the baby car. In addition, it was designed to use LCD and LED to turn on a warning light when the temperature and humidity exceed a certain level, so that infants can be in a comfortable environment when using the baby car.