• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.351-356
• /
• 2011

Some materials show the character of rigid body in low frequency spectrum. The rigid body motions are consisted of translational and rotational motions. Especially, we can get the acceleration or displacement of a random point in the rigid body by analyzing rigid body transfer matrix at the car's engine and power train. Actually it is difficult to measure the acceleration by attaching the sensor inside of the engine and power train. So the hard to predict acceleration data can be achieved attaching the sensor on the outside of the engine and power train by analyzing the data of rigid body motion which the engine is operated using dynamo. Also this paper will show the change of predicted data and accuracy variation by not using all the measured data but a few exceptions of the point number.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.269-272
• /
• 2004

초음파 센서를 이용한 호흡측정방식은 관성 및 압력의 오차의 영향을 거의 받지 않고, 반영구적으로 사용이 가능한 호흡기기이다. 초음파의 특성을 이용한 것으로 송수신시 초음파의 매질인 공기의 흐름에 의한 반송형식인 초음파의 전달속도 차이를 이용하여 호흡량 및 흐름을 detecting하는 기술이다. 본 논문에서는 환자를 중심으로 측정이 이루어져야 하기 때문에 센서의 송수신시 일어나는 신호의 sensitivity를 향상시켜서 약한 호흡에도 dectection이 가능하도록 하였다.

• 한국융합학회논문지
• /
• 제11권4호
• /
• pp.343-350
• /
• 2020

본 연구는 여자 핸드볼 국가대표 선수를 대상으로 관성센서(IMU)를 활용하여 5개월 동안 국내 또는 국외 연습경기 총 16경기를 대상으로 움직임을 정량화하고 훈련의 효율성과 포지션별 움직임 차이를 확인하고자 하였다. 골키퍼를 제외한 15명의 필드플레이어를 대상으로 하였으며 연구결과 다음과 같은 결론을 얻었다. 플레이어로드는 Wing > Back > Pivot 순으로 나타났고 국외경기에서 높은 것으로 나타났다. 좌·우 방향전환은 Pivot이 저강도에서 가장 많은 것으로 나타났고 중·고강도는 Back에서 가장 많이 나타났다. 국외경기의 저·중강도 방향전환 움직임이 많은 것으로 나타났다. 저강도 가속과 감속은 Pivot이 가장 많은 것으로 나타났고 중·고강도 가속과 감속은 Back이 가장 많은 것으로 나타났다. 국외경기에서 저·중강도 가속과 저·중·고강도 감속이 많은 것으로 나타났다. 점프는 Back이 중강도, Wing이 고강도 점프가 많이 나타났지만 경기 유형간 차이는 나타나지 않았다.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제23권2호
• /
• pp.137-145
• /
• 2020

Purpose: The Oral-anal Transit Test (OTT) is a simple method of obtaining information about colonic transit. We aim to assess the correlation of OTT with the neuromuscular integrity of the colon determined by colonic manometry (CM). Methods: All patients who had OTT followed by CM were evaluated. Less than 6 of 24 markers remaining on OTT was considered normal. CM was performed per previously published guidelines. A normal CM was defined as at least one High Amplitude Propagating Contraction progressing from the most proximal sensor through the sigmoid colon. Results: A total of 34 patients underwent both OTT and CM (44% male, age 4-18 years, mean 11.5 years, 97% functional constipation +/- soiling, Hirschsprung's Disease). Of normal and abnormal OTT patients, 85.7% (6/7) and 18.5% (5/27) respectively had normal CM. When all markers progressed to at least the sigmoid colon, this was 100% predictive against colonic inertia. Greater than 50% of patients with manometric isolated sigmoid dysfunction had markers proximal to the recto-sigmoid. Conclusion: OTT and CM are both valuable studies that assess different aspects of colonic function. OTT can be used as a screening test to rule out colonic inertia. However, the most proximal extent of remaining markers does not predict the anatomical extent of the manometric abnormality, particularly in isolated sigmoid dysfunction.

• 한국전자통신학회논문지
• /
• 제10권4호
• /
• pp.469-475
• /
• 2015

본 논문은 반도체 센서를 이용하여 공간상 시스템의 자세를 정확히 측정할 수 있도록 확장 칼만 필터를 설계하는 방법에 관한 연구이다. 공간상 자세는 관성좌표계(고정 좌표계)로부터 몸체에 부착된 회전좌표계의 상호 관계로 표현한다. 자세를 표현하는데 있어서 간결한 방법인 쿼터니언을 상태변수로 이용하며, 속도 센서로부터 계측된 값을 입력으로 가정하고, 상태 변화를 추정하였다. 그리고 가속도 센서로부터 획득된 값을 관측 데이터로 하여 추정한 값과의 정합과정을 통해 최적의 추정치를 얻어낸다. 이때 추정의 정밀도를 높이기 위해 추정 주기를 센서특성에 맞춰 조절하도록 확장 칼만 필터를 설계하였다. 그 결과, 3축 속도 센서와 3축 가속도 센서를 이용하여 설계된 추정기의 RMS(: Root Mean Square) 추정오차가 시뮬레이션에서 약 1.7 [$^{\circ}$] 이하로 유지되었고, 실험에서 100 [ms] 의 주기로 상태추정을 함으로 추정기가 유용함을 입증하였다.

• 항공우주기술
• /
• 제10권2호
• /
• pp.1-10
• /
• 2011

본 논문은 스마트무인기 위성관성항법장치(DGNS)의 신뢰성 검증을 위해 다른 위성관성 항법장치(Athena511, Nav420)와의 비행시험 결과를 비교하여 기술한다. DGNS의 성능 및 신뢰성 검증은 유인항공기를 이용한 비행시험과 차량에 탑재한 주행시험으로 수행되었다. DGNS와 비교 대상 위성관성항법장치는 GPS 위치와 관성센서 정보 등의 성능 확인을 통해 비교 검토되었다. 비행시나리오에 따른 유인항공기 비행시험을 통해 DGNS는 동급 상용제품에 대해 유사하거나 다소 우수한 성능과 신뢰성을 갖는 것으로 확인되었다. DGNS는 현재 스마트무인기에 탑재되어 비행시험 중이다.

• 센서학회지
• /
• 제29권5호
• /
• pp.312-322
• /
• 2020

As the use of mobile devices increase, there is public interest in the utilization of the human motion generated mechanical energy. The human motion generated mechanical energies vary depending on the body region, type of motion, etc., and an appropriate device has to be designed to utilize them effectively. In this work, a device based on the principles of triboelectric generation and inertia was assessed in order to utilize the multi-axial mechanical energies generated by human motions. To improve the output performance we confirm the changes in the output that vary with the structural design, the reasons for such changes, and variations in performance based on the parts of the human body. In addition, the level of electrical energy generated based on motion type was measured; a maximum voltage of 30 V and a current of 2 ㎂ were generated. Finally, the proposed device was utilized in LEDs used for lighting, thus demonstrating that multi-axial mechanical energies can be harvested effectively. Based on the results, we expect that the developed device can be utilized as a sensor to detect mechanical energies, to sense changes in motion, or as a generator for auxiliary power supply for mobile devices.

• 전기학회논문지P
• /
• 제56권3호
• /
• pp.129-135
• /
• 2007

This paper deals with speed-sensorless control of DC servo motor using Neuro-Fuzzy Observer. DC servo motor has very low rotor inertia and excellent response characteristic and it is very useful to control torque and speed. It is easy to detect the voltage and current and resolver or encoder is used to measure a rotor speed. But it has a limit as a driving speed to detect speed precisely. So it is problem to improve the performance of the driving system. To solve this problem, it is studied to detect a speed of DC servo motor without sensor. In particular, study on the method to estimate the speed using the observer is performed a lot. In this paper, the gain of the observer is properly set up using the Neuro-Fuzzy control and Neuro-Fuzzy Observer that have a superior transient characteristic and is easy to implement compared the existing method is designed. It calculates the differentiation of the rotor current directly using the rotor current measured in the DC servo motor and estimates the speed of the rotor using the differentiation. Proposed speed sensorless control method is performed using the estimated speed. Also, it is proved feasibility of the proposed observer from the comparison tested a case with a speed sensor and a case without a speed sensor which used a highly efficient drive and 200[w] DC servo motor starting system.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권1호
• /
• pp.43-56
• /
• 2011

An integrated system composed of guidance, navigation and control (GNC) system for autonomous proximity operations and the docking of two spacecraft was developed. The position maneuvers were determined through the integration of the state-dependent Riccati equation formulated from nonlinear relative motion dynamics and relative navigation using rendezvous laser vision (Lidar) and a vision sensor system. In the vision sensor system, a switch between sensors was made along the approach phase in order to provide continuously effective navigation. As an extension of the rendezvous laser vision system, an automated terminal guidance scheme based on the Clohessy-Wiltshire state transition matrix was used to formulate a "V-bar hopping approach" reference trajectory. A proximity operations strategy was then adapted from the approach strategy used with the automated transfer vehicle. The attitude maneuvers, determined from a linear quadratic Gaussian-type control including quaternion based attitude estimation using star trackers or a vision sensor system, provided precise attitude control and robustness under uncertainties in the moments of inertia and external disturbances. These functions were then integrated into an autonomous GNC system that can perform proximity operations and meet all conditions for successful docking. A six-degree of freedom simulation was used to demonstrate the effectiveness of the integrated system.

• 제어로봇시스템학회논문지
• /
• 제13권1호
• /
• pp.39-45
• /
• 2007

This paper proposes a method of container position measurement using automatic landing system that is estimated by a laser range finder. In the most of container position measurement methods, CCD cameras or laser scanners have been used to get the source data. However those sensors are not only weak for disturbances, for examples, the light, fog, and rain, but also the system cost is high. When the spreader arrives at the goal position, it is still swung by inertia or by wind effect. In this paper, the spreader swung data have been used to find the container position. The laser range finder is equipped in the front side of spreader. It can measure distance and relative position between spreader and container. This laser range finder can be rotated as desired by a motor. And a tilt sensor is equipped on the spreader to measure spreader sway. The relative position information between the spreader and a container using the laser range finder and tilt sensor is estimated through the geometrical analysis.