• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.4
• /
• pp.325-330
• /
• 2000

Alginate obtained from brown algae had various physicochemical and rheological properties and could used as a dietary fiber, However, alginate has not been widely applied to the food industry, since it had high viscosity, high gelling effect conjugated with some mineral, and low solubility. To improve functionality of alginate, partially develymerized alginates, which was water-soluble dietary fiber were obtained by hydrolysis of alginate from the sea tangle, Laminaria japonicus, heated at $121^{\circ}C$. Effects of depolymerization of alginate on the changes of viscosity and average molecular weight, block composition ratio of mannuronate to guluronate (M/G ratio), chemical properties using $PT-IR, ^1H-NMR, and ^(13)C-NMR$ spectrum were investigated. The average molecular weight and viscosity of the alginate were rapidly decreased with the thermal decomposition, and estimated to be 1,307,415 dalton and 284,000 cps, before heating, 728,106 and 3,940.29 cps after 30 min heating, 102,635 and 22.22 cps after 2.5 hrs heating, 51,205 and 12.05 cps after 3 hrs, and 10,049 and 4.28 cps after 6.5 hrs, respectively. The M/G ratio was increased with the heating time, while MM-block did not show any changes and GG-block diminished. The results of $FT-IR, ^1H-NMR and ^(13)C-NMR$ spectrum suggested that changes of molecular structure did not occur by the thermal decomposition.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.599-607
• /
• 2000

In this research, ${NH_4}^+-N$ and ${PO_4}^{3-}-P$ in wastewater were removed by crystallization. Nitrogen and phosphate have been regarded as key nutrients in the eutrophication of rivers and lakes. Struvite, $MgNH_4PO_4{\cdot}6H_2O$, is insoluble in alkaline solutions. Fertilizer industry wastewater contains organic and nitrogen concentration of 330 mg/L and 550 mg/L, respectively. Nitrogen in this wastewater cannot be treated by conventional biological treatment without physicochemical pretreatment, because nitrogen concentration is relatively high compared to organic concentration. Magnesium ions used in this study were from bittern and commercial magnesium salts of $MgCl_2$ and $Mg(OH)_2$. Bittern obtained as a by-product of seasalt manufacture contains $8,000mg\;Ca^{2+}/L$ and $32,000mg\;Mg^{2+}/L$. Optimum initial pH was 10.5~11.0 and the reaction was complete or done in 2 min. Nitrogen removal efficiency using bittern, $MgCl_2 $ and $Mg(OH)_2$ (as source of $Mg^{2+}$) was 71 %, 81% and 83%. respectively. Phosphate removal efficiency was 99%, 98% and 93%, respectively. Therefore, bittern, $MgCl_2$ and $Mg(OH)_2$ can be efficiently used as $Mg^{2+}$ source for crystallization of nitrogen and phosphate. However, bittern is economically favorable $Mg^{2+}$ source for removing nitrogen and phosphate in wastewater.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.2
• /
• pp.57-68
• /
• 2004

Recently in order to more effectively and scientifically process forest official tasks, which have been focused on documents and inventories, they should be applied with the up-to-date spatial information technologies. Especially, the forest resource information management based on GIS(geographic information system) and aerial orthophoto is expected not only to play an important role as DSS(decision support system) for domestic forest conservation policy and forestry development industry but also to service forest resource information toward people such as the owners of a mountain rapidly. In this study, the important forest information such as digital topography map, digital forest type map, digital forest cadastral map, digital aerial photographs and attribute data were first reprocessed and constructed in DBMS(data base management system). In addition, forest officials could analyze and retrieve forest information by using detail sub-application systems such as forest cadastral retrieval, forest land development information management, reserved forest information management and forest resource information retrieval. For this, the user interface is developed by using Visual Basic 6.0 and MapObjects 2.1 of ESRI based on CBD(component based development) technology. The result of developing this system will not only perform constructing economical forest and better environment but also be the foundation of domestic spatial technology for forest resource management.

• Journal of Environmental Science International
• /
• v.23 no.10
• /
• pp.1703-1718
• /
• 2014

An eco-friendly integrated multi-trophic aquaculture (IMTA) farming technique was developed with the goal of resolving eutrophication by excess feed and feces as fish-farming by-products. A variety of seaweed species were tried to remove inorganic nutrients produced by fish farming. However, there have been few trials to use Sargassum fulvellum in an IMTA system, a species with a relatively wide distribution across regions with various habitat conditions, great nutrient removal efficiency and importance for human food source and industrial purposes. In this regard, our study tried to examine feasibility of using S. fulvellum in an IMTA system by analyzing growth characteristics of the species in an IMTA system comprising of rockfish (Sebastes shlegeli), sea cucumber (Stichopus japonocus) and the tried S. fulvellum (October 2011 - November 2012). We also monitored environment conditions around the system including current speed, water temperature and inorganic nutrient level as they may affect growth of S. fulvellum. S. fulvellum in the IMTA system, which were $15.72{\pm}5.67mm$ long at the start of the experiment in October 2011, grew to a maximum of $1093{\pm}271.13mm$ by May 2012. In September, seaweed growth was reduced to a minimum of $280{\pm}70.43mm$ in length. Then, S. fulvellum began to grow again reaching $325{\pm}196.19mm$ by November 2012. Wet weight of the seaweed was $4.01{\pm}1.89g$ at the start of the experiment and reached a maximum of $109.26{\pm}34.23g$ in May. The weight gradually declined to a low of $15.12{\pm}8.40g$ in September 2012. Weight began to increase once more, rising to $39.27{\pm}21.69g$ by November. During the experiment, the average velocity at the surface and the bottom was 6.5 cm/s and 3.4 cm/s, respectively. The water temperature ranged $5.0-23.5^{\circ}C$, which was considered suitable for growing S. fulvellum. Results of the study indicated no significant differences in inorganic nutrients between pre- and post-IMTA installation. It was thus concluded that S. fulvellum can be a suitable seaweed species to be used in an IMTA system.

• Journal of Radiation Protection and Research
• /
• v.46 no.3
• /
• pp.127-133
• /
• 2021

Background: Phosphogypsum is material produced as a byproduct in fertilizer industry and is generally used for building materials. This material may contain enhanced radium-226 (²²⁶Ra) activity concentration compared to its natural concentration that may lead to indoor radon accumulation. Therefore, an accurate measurement method is proposed in this study to determine ²²⁶Ra activity concentration in phosphogypsum sample, considering the potential radon leakage from the sample container. Materials and Methods: The International Atomic Energy Agency (IAEA) phosphogypsum reference material was used as a sample in this study. High-purity germanium (HPGe) gamma spectrometry was used to measure the activity concentration of the ²²⁶Ra decay products, i.e., ²¹⁴Bi and ²¹⁴Pb. Marinelli beakers sealed with three different sealing methods were used as sample containers. Due to the potential leakage of radon from the Marinelli beaker (MB), correction to the activity concentration resulted in gamma spectrometry is needed. Therefore, the leaked fraction of radon escaped from the sample container was calculated and added to the gamma spectrometry measured values. Results and Discussion: Total activity concentration of ²²⁶Ra was determined by summing up the activity concentration from gamma spectrometry measurement and calculated concentration from radon leakage correction method. The results obtained from ²¹⁴Bi peak were 723.4 ± 4.0 Bq·kg^-1 in MB1 and 719.2 ± 3.5 Bq·kg^-1 in MB2 that showed about 5% discrepancy compared to the certified activity. Besides, results obtained from ²¹⁴Pb peak were 741.9 ± 3.6 Bq·kg^-1 in MB1 and 740.1 ± 3.4 Bq·kg^-1 in MB2 that showed about 2% difference compared to the certified activity measurement of ²²⁶Ra concentration activity. Conclusion: The results show that radon leakage correction was calculated with insignificant discrepancy to the certified values and provided improvement to the gamma spectrometry. Therefore, measuring ²²⁶Ra activity concentration in TENORM (technologically enhanced naturally occurring radioactive material) sample using radon leakage correction can be concluded as a convenient and accurate method that can be easily conducted with simple calculation.

• Journal of Korea Trade
• /
• v.25 no.8
• /
• pp.57-74
• /
• 2021

Purpose - This study aims to analyze the characteristics of network construction by Norwegian Air and AirAsia X, which are recognized as leading airlines in the long-haul LCC market. Based on this analysis, this study intends to provide implications for networking strategies for Korean LCCs that seek to enter the long-haul market when the aviation market stabilizes again upon the end of the COVID-19 pandemic. Design/methodology - To conduct the network analysis on long-haul low-cost airlines, the Official Airline Guide (OAG) Schedule Analyzer was used to extract long-haul data of Norwegian Air and AirAsia X. To analyze the trend of the long-haul route network, we obtained the data from 3 separate years between 2011 and 2019. The network was analyzed using UCINET 6.0 in order to examine the network structure of long-haul low-cost airlines and the growth trend of each stage. Findings - Analyzing the network of long-haul routes by visualizing the network structure of low-cost carriers showed the following results. In its early years, Norwegian Air's long-haul route network, centering on regional airports in Spain and Sweden, connected European regions, the Middle East, and Africa. As time passed, however, the network expanded and became steadily strong as the airline connected airports in other European countries to North America and Asia. In addition, in 2011, AirAsia X showed links to parts of Europe, such as London and Paris, the Middle East and India, and Australia and Northeast Asia, centering on the Kuala Lumpur Airport. Although the routes in Europe were suspended, the network continued to expand while concentrating on routes of less than approximately 7,000 km. It was found that instead of giving up on ultra-long-haul routes such as Europe, the network was further expanded in Northeast Asia, such as the routes in Korea and Japan centering on China. Originality/value - Until the COVID-19 pandemic broke out, Norwegian Air actively expanded long-haul routes, resulting in the number of long-haul routes quintupling since 2011. The unfortunate circumstance, wherein the world aviation market was rendered stagnant due to the outbreak of COVID-19, hit Norwegian Air harder than any other low-cost carriers. However, in the case of AirAsia X, it was found that it did not suffer as much damage as Norwegian Air because it initially withdrew from unprofitable routes over 7,000 km and grew by gradually increasing profitable destinations over shorter distances. When the COVID-19 pandemic ends and the aviation market stabilizes, low-cost carriers around the world, including Korea, that enter the long-haul route market will need to employ strategies to analyze the marketability of potential routes and to launch the routes that yield the highest profits without being bound by distance. For stable growth, it is necessary to take a conservative stance; first, by reviewing the business feasibility of the operating a small number of highly profitable routes, and second, by gradually expanding these routes.

• Health Policy and Management
• /
• v.29 no.2
• /
• pp.206-219
• /
• 2019

This paper aims to demonstrate current health expenditure (CHE) and National Health Accounts of the years 2018 constructed according to the SHA2011, which is a manual for System of Health Accounts (SHA) that was published jointly by the Organization for Economic Cooperation and Development (OECD), Eurostat, and World Health Organization in 2011. Comparison is made with international trends by collecting and analyzing health accounts of OECD member countries. Particularly, scale and trends of the total CHE financing as well as public-private mix are parsed in depth. In the case of private financing, estimation of total expenditures for (revenues by) provider groups (HP) is made from both survey on the benefit coverage rate of National Health Insurance (by National Health Insurance Service) and Economic Census and Service Industry Census (by National Statistical Office); and other pieces of information from Korean Health Panel Study, etc. are supplementarily used to allocate those totals into functional classifications. CHE was 144.4 trillion won in 2018, which accounts for 8.1% of Korea's gross domestic product (GDP). It was a big increase of 12.8 trillion won, or 9.7%, from the previous year. GDP share of Korean CHE has already been close to the average of OECD member countries. Government and compulsory schemes' share (or public share), 59.8% of the CHE in 2018, is much lower than the OECD average of 73.6%. 'Transfers from government domestic revenue' share of total revenue of health financing was 16.9% in Korea, lower than the other social insurance countries. When it comes to 'compulsory contributory health financing schemes,' 'transfers from government domestic revenue' share of 13.5% was again much lower compared to Japan (43.0%) and Belgium (30.1%) with social insurance scheme.

• Journal of fish pathology
• /
• v.35 no.1
• /
• pp.113-120
• /
• 2022

Scuticociliatosis caused by Miamiensis avidus is a very important parasitic disease in olive flounder farming industry. The aim of this study was to determine effect of combined treatment with blue LED (light-emitting diode) illumination and formalin on olive flounder (Paralichthys olivaceus) infected with M. avidus. Different intensity of 405 nm LED (20, 40, and 60 μmol·m^-2·s^-1) was illuminated on 2.2×10⁴ cells/well of M. avidus in a 24 well microplate for 24 h. Also, 2.4×10⁴ cells/well of M. avidus were exposed to varying combinations of 60 μmol·m^-2·s^-1 of 405 nm LED and serial 10-fold dilutions of formalin (from 10 to 100 ppm) for 15, 30, 45, and 60 min. Surviving M. avidus were counted using a hemocytometer. For in vivo test, flounder acclimatized at 11-12 practical salinity unit (psu) were challenged with 2×10⁶ cells/ml of M. avidus by immersion method for 1 h. Then, fish were moved and divided into four groups; "F" group, treated with formalin at 50 ppm; "L" group, treated with 60 μmol·m^-2·s^-1 of 405 nm LED; "C" group, treated with combination of the two methods; and the control group. After treatment for 30 min, fish were transferred to new tanks (salinity = 11-12 psu) and observed for 3 weeks. As a result, illumination of 405 nm LED at 60 μmol·m^-2·s^-1 killed 100% of M. avidus after 12 h, while 67% and 90% of the scuticociliate died at 20 and 40 μmol·m^-2·s^-1, respectively, after 24 h exposure. One hundred percent of M. avidus was killed at 90, 80, 80 and 70 ppm after exposure to formalin for 15, 30, 45 and 60 min, respectively. However, combined method (e.g., 60 μmol·m^-2·s^-1 of 405 nm-LED plus 50 ppm formalin) killed the parasite within 30 min. From in vivo test, similarly, survival rates of fish challenged with M. avidus were 100%, 43%, 29% and 0% in the C, F, L, and control groups, respectively. Results obtained in this study demonstrates that the combined treatment method has clear synergistic effect on scuticociliatosis in fish.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.6
• /
• pp.124-131
• /
• 2017

Recently, drone is extending its range of usability. For example, the delivery, agriculture, industry, and entertainment area take advantage of drone mobilities. To control real drones, it needs huge amount of drone control training steps. However, it is risky; falling down, missing, destroying. The virtual drone system can avoid such risks. We reason that what kinds of technologies are required for building the virtual drone system. First, it needs that the virtual drone authoring tool that can assemble drones with the physical restriction in the virtual environment. We suggest that the drone assembly method that can fulfill physical restrictions in the virtual environment. Next, we introduce the virtual drone simulator that can simulate the assembled drone moves physically right in the virtual environment. The simulator produces a high quality rendering results more than 60 frames per second. In addition, we develop the physics engine based on SILS(Software in the loop simulation) framework to perform more realistic drone movement. Last, we suggest the virtual drone controller that can interact with real drone controllers which are commonly used to control real drones. Our virtual drone system earns 7.64/10.0 user satisfaction points on human test: the test is done by one hundred persons.

• Journal of the Korean Society of International Agriculture
• /
• v.23 no.5
• /
• pp.513-519
• /
• 2011

In recent, the cultivation of maize in the world is being increased as a feed for the animal due to the increase of the large amount of meat consumption. However, reduction of supply for the feeding maize by the natural disaster such as drought, flooding, and demanding materials for bioenergy are attributed to increase the cereal price of the world that caused for the fluctuation of prices. The research has been done to provide useful information to the Korean agricultural investor regarding the current status of maize production and distribution in Cambodia. The maize cultivation of Cambodia in 2009 presented as a second major crop at the area of 6.8% in the total crop production area, and it continuously increased maize production yearly basis for the internal uses as well as for the exportation. The total amount of production showed by amount of 0.92 million tons due to the increased production of unit area. The yield production of unit area in current shows about 4 tones per hectare. About 90% of total production produced during August to September at wet season, and area of Batambang province produced about 70% of the total production. The production of feeding maize cultivated about 70% of the total cultivation area, and the exportation have done around 60% and remains were consumed as a domestic uses. The prospects of maize production in Cambodia will be increased due to the acceleration of livestock industry as 8.7% of annual growth rate.