• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.3
• /
• pp.1-6
• /
• 2005

This study tried to identify factors influencing on customer's trust in Mobile Commerce Sites. Four factors were found ; transaction security, site image, navigation usability, payment convenience. These factors showed strong correlations with customer's trust. Implications of the study and further research issues are discussed.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.17-26
• /
• 2001

The fatigue strength of SM55C has significantly decreased by 83% compared with atmosphere where distilled exists due to strong erosive action of acid fog. The reason is inferred in a way that strong acid erosive material such as acid fog act and give rise to multi-site crack on the surface. Several fatigue clacks occurred under the acid fog repeat the process of division and unification on the surface and form a long non-propagating crack throughout the circumference of experimented steel. However, in the depth, many parts do not show much trace of unification, and the depth is not as big as the one of normal crack shape. 10% of $CaCl_2$ causes strong erosive reaction to material. Then eventually make the life of fatigue shooter. On the other hand, 20% of $CaCl_2$ beings about oxidized material organic crack closing due to weak erosive reaction.

• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.135-143
• /
• 2009

Most of debris flow occurred in Korea have been known to be caused by the heavy rainfall at the soil deposits on the mother rock, affected by conditions of rainfall, topography and geology, especially terrain deposits. A study on debris flow behavior should be carried out by investigating various types of debris flow systematically and analyzing their complicate characteristics in the engineering view points. Tremendous debris flows occurred at Duksan-ri in Inje-gun of Gangwon province during summer in 2006. These sites are selected to study the characteristics of debris flow by investigating the influencing factors on it and analyzing their correlations between them. Most of data about influencing factors were obtained by visiting sites in field.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.209-214
• /
• 2007

This paper is the research result about centrifuge model experiments of investigating the behavior of bridge abutment on the sloped ground. Ground condition of the studied site was the bridge abutment with pile foundation adjacent to the slope. The pile foundations was supported on the soft rocks covered with the embankment. Evaluating the behavior of such a complicate ground and structure conditions was not easy so that the centrifuge modelling was performed to find the overall behavior of them. Layout of centrifuge model experiment was simplified to simulate easily the actual behavior of very complicate site condition. Construction process in field such as ground excavation for footing foundation, installation of piles, placement of footing and bridge abutment, backfilling and surcharge loading eas duplicated in the centrifuge model experiment. Consequently, the stability of the piled bridge abutment adjacent to the slope of embankment was evaluated throughout centrifuge modelling.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.59-64
• /
• 2007

This study introduces an environmental noise evaluation procedure and results for a wind turbine (W/T) system. Test and evaluation are required by the international standard IEC 61400-11 in the aspect of environmental effect. Test and evaluation are performed on U-50 WT model which is first developed by the domestic W/T manufacturer. W/T test model is under operation in Daekwanryung wind test site. An integrated monitoring system in the test site is utilized for the evaluation. With the noise signal, meteorological data and W/T operational data are monitored in real time by the integrated monitoring system using LabVIEW. From the measured noise data, acoustic power level are estimated and compared with those of other similar size WT under the wind speeds required by international standard.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.1-6
• /
• 1998

This study was conducted to use disused vinyl as biofilm for biological sewage treatment. Efficiency verification was performed on laboratory and on-site plant. In laboratory study, total biochemical oxygen demand(TBOD) removal rate was ranged 94.8~97 % in each hydraulic retention tim(HRT), 12, 16, 20, 24 hr, respectively. At that time, filling rate was 50 %. And effluent TBOD concentration was low ranged 3.64~6.28 mg/L. In on-site plant, TBOD removal rate was ranged 88.2~96.8 % and effluent TBOD concentration was 4.8~17.7mg/L. This concentration was lower than disign effluent concentration, 30mg/L. Total kjeldhal nitrogen(TKN) removal efficiency was ranged 56.8~90.9%. This was resulted higher than Lab. scale treatment efficiency.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.27-34
• /
• 1998

According to growing interest in environmental quality with improvements of a standard of living site selection problems such as waste landfill sites, caused regional conflicts. This study investigates a waste landfill estimation method that was used to for storage, management, analysis and display of environmental information provided by geo-spatial information system(GIS) and analytic hierarchy process(AHP) as a decision-making method. If GIS is integrated with AHP, site selection problems of environmental hatred facilities shall be able to be very useful, because of AHP with flexibility which appropriately reflects opinions of the related group.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.4
• /
• pp.74-82
• /
• 2002

Although there have been many Web site evaluation models with an explosive growth of Internet, they seem to be not fully considering various aspects of Web sites resulting from their changing roles. This paper proposes a method for evaluating Internet Web sites based on an integrated view. The method consists of 4 views including user-judgement view, user-performance view, expert-judgement view, and expert-performance view. Working procedures of the method along with tools and techniques and its implications are presented.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.4
• /
• pp.105-109
• /
• 2004

The purpose of this paper is to examine the empirical analysis for charging factors and the evaluation models of internet site. Thus this is to analyze the revenue creation factors affecting the customer satisfaction of tourism information sites in the Internet. Based on the regression model applied to a customer survey, this study shows that among the characteristics of the site, technical factor and community factor have the most significant effect on charging factor and customer satisfaction.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.01a
• /
• pp.129-130
• /
• 2023

본 논문에서는 키넥트 센서 기반의 산업 현장 사고 모니터링 애플리케이션을 설계하고 구현한다. 이 애플리케이션은 기존 산업 현장 사고 모니터링 인력의 의존을 줄이고, 사고 발생 자동 감지로 인한 알림 기능과 현장 기록 기능을 구현한다. 사고 발생 감지 기능은 키넥트 센서 기반으로 스켈레톤 인식 기능을 활용하여 기존에 설정된 좌표 값 이하로 헤드 조인트 좌표가 떨어질 경우 관리자에게 알림을 보내도록 구현한다. 사고감지 및 알림 시스템은 기존 모니터링 시스템을 보완하는 방식으로 감지 인력의 한계를 극복할 수 있는 기능을 제공한다.