• Tunnel and Underground Space
• /
• v.23 no.1
• /
• pp.42-53
• /
• 2013

The percussion rate and spacing of the button of drill bit are very important in maximizing the drilling efficiency. Therefore, a series of percussion tests using Hopkinson bar system was carried out to assess the fragmentation performance against the beat rate and spacing of a drill bit. First, single percussion test complemented with numerical simulation was performed to analyze rock fragmentation phenomenon and to describe the fragmentation process. Next, multiple percussion test that repetitively strike the rock sample moving at predetermined rate was carried out to predict drilling efficiency against the button spacing. After the tests, the fragmented volume of the rock was measured by laser scanner and the drilling performance was analyzed using the calculated percussive energy and measured negative volume. Based on the results, the single impact performance of drill bit with 102 mm diameter was predicted.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.320-323
• /
• 2005

This paper discusses heat problem of IC, which composes the electronic instruments, to guarantee reliability of electronic instruments. And also proposes the unified equivalent model for various electronic instrument products to guarantee reliability and life of its parts. Because electronic instruments are down sizing and operated with high frequency, the internal temperature of electronic instruments is rising steadily. The internal temperature of the electronic instruments gives a big effect to electronic instrument's reliability and life. The semiconductor parts are the representative heat generation parts because of its complicated function, high frequency and high density. Consequently, guaranteeing reliability and life of electronic semiconductor is the important start point in securing the reliability and life of the electronic instrument product. Unfortunately, there are many factors, which affect heat dissipation efficiency. The heat dissipation efficiency follows the environment where the electronic instrument products are used. Therefore it is very difficult to define reliability and life of the electronic manufactures. Electronic instrument products are composed of printed circuit board (PCB), integrated circuit (IC), resistance, and capacitor and so on. And there are superposed thermal resistances, because the parts are arrayed on the printed circuit board (PCB), Therefore the total thermal resistance is variable. Consequently it cannot have same thermal model for each electronic instrument products. In the next part, we propose the unified equivalent model for various electronic instruments. And using the proposed equivalent model proofs the method for analysis reliability of electronic parts.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.334-340
• /
• 2017

Reliability is considered a particularly important design factor for systems that have critical results once a failure occurs in a system, such as trains, airplanes, and passenger ships. The reliability of the system can be improved in several ways, but in a system that requires considerable reliability, the redundancy of parts is efficient in improving the system reliability. In the case of duplicating parts to improve reliability, the kind of parts and the number of duplicating parts should be determined under the system reliability, part costs, and resources. This study examined the redundancy allocation of multi-level systems with serial structures. This paper describes the definition of a multi-system and how to optimize the kind of parts and number of duplications to maximize the system reliability. To optimize the redundancy, the cuckoo search algorithm was applied. The search procedure, the solution representation and the development of the neighborhood solution were proposed to optimize the redundancy allocation of a multi-level system. The results of numerical experiments were compared with the genetic algorithm and cuckoo search algorithm.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.89-94
• /
• 2019

K1A1 tank commander's primary thermal sight is a device that enables tank commanders to detect, identify, aim and track the target by observing targets in all directions during day, night and in situations of smokescreen and fog through $360^{\circ}$ rotation independent from the gunner's primary thermal sight and stabilizing the line of sight even under the vibrations occurring when the tank is standstill and moving. The main function of this device is to detect and process visible and thermal images and deliver the final images to the tank commander. One of the core parts to that end is the observation window (daytime/thermal image window). This core part is mounted at the entrance of the optical path for observing the target and plays the role of making visible light during the daytime and infrared light during the night pass through the target and transmitting the resultant images to the internal optical system of the tank commander's primary thermal sight. Such core parts have been selected as depot maintenance items so that they are replaced by new parts instead of being recycled when they are subjected to maintenance in most cases. That is, the military budget is wasted because such parts are replaced by new parts despite that they can be recycled for maintenance. Therefore, this study proposed a mounting tool for polishing and coating observation windows (daytime and thermal image window) using planar polishing equipment and DLC (Diamond-Like Carbon) coating equipment. In addition, this study presented an amendment (proposal) of the Depot Maintenance Work Request (DMWR) already published to verify the performance of recycled products including the establishment of inspection standards for recycling processes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.448-466
• /
• 2019

Today, companies are increasingly focused on SCM (Supply Chain Management) as a means for cost-cutting and efficient operation. The company's ultimate objective is to win and maintain a sustained dominant position in the uncertainties of the global environment and future competitiveness. In this respect, this study examined the effects of management strategy, collaboration process and SCM integration on corporate performance in small and midsize parts manufacturers. The results of empirical analysis are summarized as follows. Management strategy, collaboration process and SCM integration had positive effects on corporate performance in domestic small and midsize parts manufacturers, and all hypotheses were supported. Consequently, it can be confirmed that quality, cost and flexibility for management strategy, and strategic objective perception, support policy, problem solution and knowledge information sharing for delivery and collaboration as small and midsize parts manufacturers are mechanisms for improving quality reliability, decreasing cost, delivery obedience and information system operation of SCM integration, and boosting corporate quantitative and qualitative performance.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.04a
• /
• pp.393-393
• /
• 1993

• Journal of Korea Foundry Society
• /
• v.18 no.6
• /
• pp.528-533
• /
• 1998

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.184-191
• /
• 2008

In this paper, it was performed to protect the remanufacturing industry of domestic automobile part and grasp the latest tendency of remanufacturing industry of domestic automobile part for development of remanufacturing technology and economical support of government. Research on the present statue of the remanufacturing industry was indicated that the number of remanufacture enterprises about automobile part, the annual, the number of employee in remanufacture and the type of remanufacturing. The general problems were presented which blocked the activities of domestic automobile part. It was also presented that problem of remanufacturing technology side and quality assurance of remanufactured automobile part and found out solution.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.3
• /
• pp.44-50
• /
• 2001

Information technology has been used many areas not only computer communications but also manufacturing managements. This paper is about the parts code and utility of 3d image maker that is needed in parts management of manufacturing system This images can be viewed by internet network, that makes it possible to teach and train new workers. Other application area would be e-comment cyber show and e-trade.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.195-198
• /
• 2001

This paper addresses the problem of placing tools in a tool magazine with random-select capability on a flexible machine. The tool placement problem could be a significant portion of the total processing time. It is assumed that the total number of tools required to process a set of parts exceeds the available magazine capacity, and so tool switches may occur between two adjacent parts in a given part sequence. Two heuristics are presented so as to minimize the total travel distance of the tool magazine before the completion of all parts.