A Study on Remanufacturing Industry for Automobile Parts

자동차부품 재제조산업에 관한 연구

  • Mok, Hak-Soo (Department of Industrial Engineering, Pusan National University) ;
  • Jeon, Chang-Su (Department of Industrial Engineering, Pusan National University) ;
  • Han, Chang-Hyo (Department of Industrial Engineering, Pusan National University) ;
  • Song, Min-Jun (Department of Industrial Engineering, Pusan National University) ;
  • Park, Byung-Sun (Department of Industrial Engineering, Pusan National University) ;
  • Kwak, Hyun-Soo (Department of Industrial Engineering, Pusan National University) ;
  • Park, Sang-Jin (Department of Industrial Engineering, Pusan National University)
  • 목학수 (부산대학교 산업공학과) ;
  • 전창수 (부산대학교 산업공학과) ;
  • 한창효 (부산대학교 산업공학과) ;
  • 송민준 (부산대학교 산업공학과) ;
  • 박병선 (부산대학교 산업공학과) ;
  • 곽현수 (부산대학교 산업공학과) ;
  • 박상진 (부산대학교 산업공학과)
  • Published : 2008.11.01

Abstract

In this paper, it was performed to protect the remanufacturing industry of domestic automobile part and grasp the latest tendency of remanufacturing industry of domestic automobile part for development of remanufacturing technology and economical support of government. Research on the present statue of the remanufacturing industry was indicated that the number of remanufacture enterprises about automobile part, the annual, the number of employee in remanufacture and the type of remanufacturing. The general problems were presented which blocked the activities of domestic automobile part. It was also presented that problem of remanufacturing technology side and quality assurance of remanufactured automobile part and found out solution.

Keywords

References

  1. R. Steinhilper, Remanufacturing, University Bayreuth, Germany, 2005
  2. G. Seliger, B. Basdere, T. Keil and U. Rebafka, "Innovative Processes and Tools for Disassembly," Annals of CIRP, Vol.51, No.1, pp.37-40, 2002 https://doi.org/10.1016/S0007-8506(07)61460-7
  3. H. J. Kim and S. B. Ryu, "Systemization of a Remanufacturing Process and its General Guidelines with a Case Study of Automobile Alternators," Journal of the Korean Society of Precision Engineering, Vol.21, No.7, pp.93-100, 2004
  4. G. Seliger, Sustainability in Manufacturing Recovery of Resources in Product and Material Cycles, Springer, Germany, 2007
  5. H. S. Mok, C. S. Jeon, C. H. Han, M. J. Song, B. S. Park and H. S. Kwak, "Estimation of Exchange-ability for Assembly-Group," 15th CIRP International Conference on Life Cycle Engineering- LCE 2008, pp.107-112, 2008