• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.1
• /
• pp.14-19
• /
• 2002

This paper describes an automatic parts design system for gears, brake, and clutch. These parts are important components of the power transmission assembly. In conventional design process, the design of power transmission requires a number of recurrent calculations and drawings. In this paper, we propose a three-dimensional automatic design system that reduces the number of recurrent calculations and drawings. The system consists of three modules for designing gear, brake, and clutch. The proposed system has been applied to develop a transmission of forklift truck and shown to be a useful system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.14 no.24
• /
• pp.163-168
• /
• 1991

In the FMS design, the important points are the selection of parts and the determination of configuration. The common approach method which solve the selection of parts are the determination of configuration has improved that the two points are simultaneously. This study finds the best method which parts combination and configuration are satisfied at the same time. And the optimal replace time of equipment under limited budget on the view Point of engineering. economy.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.3
• /
• pp.209-216
• /
• 1989

A method for extracting the elemental information for an efficient representation of the boundary of industrial parts, from the contours of the mechanical parts, is presented. We have analyzed the performance of the boundary representation using lines and circles. We have also analyzed and compared the performance of the proposed method with that of CW tracking-RL searching method. The result of the analysis has shown that the method suggested in this paper is twice faster than CW tracking-RL searching method. The same result could also be observed in experiments.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.231-244
• /
• 2017

Objective: This study aims to understand the occupational injury characteristics of the workers in the motor vehicle parts (automobile parts) manufacturing industry and to present basic guidelines on accident prevention through accident analysis. Background: There occur many occupational injuries in the motor vehicle parts manufacturing industry. But there were few researches for the occupational injuries of the workers in the motor vehicle parts manufacturing industry. Method: This study analyzed the data of occupational injuries of 1,609 workers in the motor vehicle parts manufacturing industry in 2015. The accident characteristics were analyzed by dividing them into worker related factors and accident related factors. Results: Among the occupational injuries of the workers in the motor vehicle parts manufacturing industry, 80.6% of the victims were males, 64.0% were older than 40. 57.8% of the victims were employed by the companies with less than 50 workers. In addition, there was a difference in accident characteristics according to age, work experience, employment type, events or exposures, accident time of the day, agents, natures of injuries and illnesses, injured organs and injured body part. Conclusion: It is important to prevent equipment/machinery accidents. For this purpose, more efforts should be made to establish safety measures faithful to the basics of safety devices and safety work procedures. It is also suggested that prevention of disasters should be intensively carried out for workplaces with less than 50 employees and middle-aged and elderly people. Application: The result can be used to present guidelines for preventative measures for the workers in the motor vehicle parts manufacturing industry including safety education/training.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.1
• /
• pp.78-84
• /
• 2002

This paper is a study for the computerization program of incoming and outgoing processes of a number of parts and a great amount of material for producing products in flood industry, which was required by a medium-sized company located at Cheon-An. The program consists of four databases, one main form, seventeen subforms, and eight report forms. Concretely speaking, the four databases are prepared for products, semi-products, material, and reports, and the seventeen subforms are those for current inventory, used quantity, safty stock, product specification, etc. With the program, users can be helped and save manpower, time and cost in incoming and outgoing processes of parts and material for producing products and in their real time operation and decision-making.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.98-109
• /
• 2012

Recently, the optimisation of end-of-life (EOL) product remanufacturing processes has been highlighted. In particular, computer remanufacturing becomes important as the amount of disposed of computers is rapidly increasing. At the computer remanufacturing, depending on the selections of used computer parts, the value of remanufactured computers will be different. Hence, it is important to select appropriate computer parts at the reassembly. To this end, this study deals with a decision making problem to select the best combination of computer parts for minimising the total remanufacturing computer cost. This problem is formulated with an integer nonlinear programming model and heuristic search algorithms are proposed to resolve it.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.4
• /
• pp.529-540
• /
• 2018

As the equipment of the military has recently become more sophisticated and expensive, the cost of purchasing spare parts is also steadily increasing. Therefore, demand forecast accuracy is also becoming an issue for the effective execution of the spare parts budget. This study predicts the demand by using the data of spare parts consumption of the KF-16C fighter which is being operated in the Republic of Korea Air Force. In this paper, SARIMA(Seasonal Autoregressive Integrated Moving Average) is applied to seasonal data after dividing the spare parts consumptions into seasonal data and non-seasonal data. Proposing new methods, Majority Voting and Hybrid Method, to the non-seasonal data which consists of spare parts of low consumption with unclear pattern, We want to prove that the demand forecast accuracy of spare parts improves.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.163-172
• /
• 2012

In this study, It is assumed that customers are both usage unit of spare parts and stores of displaying and selling the goods that are installation unit of having the spare parts. The demand pattern through the effective order of spare parts and issue list in installation unit is investigated based on the assumption. Current ASL (Authorized Stockage List) selection of the army has been conducted in the way of using the analysis result of real usage experiences on spare parts used during the Korea War. For this study, ASL selection criteria and procedures based on army regulations and field manuals are specified. Since the traditional method does not presents the association analysis on spare parts used for the current equipment operating and does not have the clear criterion and analysis system about the ASL selection, in order to solve these problems, it was carried out that the association rule is employed for analyzing relationship between the effective order and issue list of the spare parts in point of the spare parts between usage unit and occurring month about purchase spare parts based on the star-schema table. Finally the new ASL selection way using the analysis result is proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.409-417
• /
• 2021

The standardization of weapon system parts is one of the elements of parts management and is an important factor for reducing the cost of acquiring and maintaining a weapon system, enhancing its reliability, improving interoperability, alleviating parts obsolescence problems, improving logistics efficiency, and strengthening the military's combat readiness. This study examined how to manage parts of domestic R&D weapon systems, overseas imports weapon system parts, and various commercial parts from a standardization perspective, and to study parts management methods for standardizing parts in the future. This system was used to achieve systematic part standardization in a military weapon system. To this end, this study investigated what elements are used to standardize weapon system parts. The importance and weight of each element were calculated using the AHP (Analytic Hierarchy Process), one of the decision-making techniques, and the design stage standards using the part selection method were studied. Through this, the selection process of standard parts, which has been made according to the experience and subjective judgment of designers and personnel, was improved to propose a systematic and objective method of standardizing weapons parts.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.183-188
• /
• 2011

Management of maintenance parts in the aircraft have difficulty because of high cost of part, necessity of separate managements, and very many kinds of parts. The serial number of parts was used in maintenance process and then the results was depended on worker's ability. Also the workers used printed work order and manual at every time in maintenance processes. In this study, we analyzed the maintenance process and the information that occurs in the material warehouse and hangar for large airline company to solve the problems about inventory and visualization. Based on above analysis we developed the maintenance process with integrated by information technologies such as QR code and tablet PC. We expect the reduced errors resulting from visually checking and decreased work hours and maintenance cost and will finally develop the smart work.