• 산업경영시스템학회지
• /
• 제40권1호
• /
• pp.144-149
• /
• 2017

This study empirically analyzes the effect of IT SME ventures' external information network diversity on their production period reduction and productivity improvement generated from technology development. This research constructs a mediating model based on the open innovation perspective and tests it with the 138 samples of South Korean IT SME ventures based on the ordinary least squares regression. This research is expected to make a good contribution by shedding a new light on the following three points about the critical role of IT SME ventures' external information network diversity in increasing their production period reduction and productivity improvement generated from technology development which has scarcely been illuminated in the extant studies in the field of the management of technology for SMEs. First, IT SME ventures' external information network diversity positively influences their production period reduction. Second, the external information network diversity positively influences IT SMEs' ventures' productivity improvement. Third, IT SME ventures' production period reduction partially mediates the influence of IT SME ventures' external network diversity on their productivity improvement. These three fresh points are expected to provide useful theoretical and practical implications. Related to the theoretical implication, this research provides a fresh implication that IT SME ventures' external information network diversity positively influences not only their production period reduction but also productivity improvement generated from technology development. Concerning the practical implication, this study suggests that the CEOs in IT SME ventures make strategic efforts to use more diverse external information sources in order to increase their production period reduction and productivity improvement generated from technology development.

• 한국산학기술학회논문지
• /
• 제13권1호
• /
• pp.125-132
• /
• 2012

부산지역 내 주거정비사업들의 추진이 매우 부진한 실정이다. 도시 및 주거 정비 기본계획상 정비예정구역의 지정 시 사업추진을 고려하지 않은 채 예정구역을 지정함으로 발생된 문제로 인식된다. 본 연구에서는 부산의 입지적 요인들이 사업추진가능성에 영향을 미친다고 가정하여 영향요인변수를 위치적 조건, 지형적조건, 규모적 조건, 입지유형적 조건, 규제적 조건 등 5개의 조건으로 구분하고 12개의 항목을 선정하여 이들 요소들이 사업추진에 어떠한 영향을 미치고 있는 지를 규명하였다. 판별분석한 결과 재개발의 경우 사업추진에 크게 영향력을 미치는 변수로는 사업용적율, 정비유형, 면적이 대표적인 요인으로 작용하고 있는 것으로 분석되었다. 또한 재건축의 경우 사업추진에 미치는 영향력이 큰 변수로 사업용적율, 정비유형, 전면도로폭, 경사 등으로 분석되었다.

• 산업경영시스템학회지
• /
• 제39권1호
• /
• pp.130-139
• /
• 2016

The purpose of this paper is to analyze the problems and the sources of defective products and draw improvement plans in a small plastic boat manufacturing process using TOC (Theory Of Constraints) and statistical analysis. TOC is a methodology to present a scheme for optimization of production process by finding the CCR (Capacity Constraints Resource) in the organization or the all production process through the concentration improvement activity. In this paper, we found and reformed constraints and bottlenecks in plastic boat manufacturing process in the target company for less defect ratio and production cost by applying DBR (Drum, Buffer, Rope) scheduling. And we set the threshold values for the critical process variables using statistical analysis. The result can be summarized as follows. First, CCRs in inventory control, material mix, and oven setting were found and solutions were suggested by applying DBR method. Second, the logical thinking process was utilized to find core conflict factors and draw solutions. Third, to specify the solution plan, experiment data were statistically analyzed. Data were collected from the daily journal addressing the details of 96 products such as temperature, humidity, duration and temperature of heating process, rotation speed, duration time of cooling, and the temperature of removal process. Basic statistics and logistic regression analysis were conducted with the defection as the dependent variable. Finally, critical values for major processes were proposed based on the analysis. This paper has a practical importance in contribution to the quality level of the target company through theoretical approach, TOC, and statistical analysis. However, limited number of data might depreciate the significance of the analysis and therefore it will be interesting further research direction to specify the significant manufacturing conditions across different products and processes.

• 대한인간공학회지
• /
• 제26권2호
• /
• pp.137-147
• /
• 2007

Dentists are known to be highly exposed to the musculoskeletal disorders (MSD). The present study investigated the prevalence of MSD among Korean dentists and association between their MSD and physical workload. In addition, work-related causes of high physical workload were identified and needs of dentists were collected for improvement of dental instrument and environment. Four types of questionnaires including the Nordic questionnaire were used to investigate body troubles, physical workload, causes of physical workload, and improvement priority of dental components. A total of 104 dentists in Seoul were participated in the survey. Neck trouble (82%) was the most prevalent in the participated dentists and shoulder (68%) and low back trouble (56%) followed, while low back trouble was reported to be most common in previous western studies. The body troubles were related to the physical workload of the corresponding body parts, although they were not associated with personal characteristics. Most dentists selected 'to keep direct view inside patient's mouth' and 'no support of the hand with dental instruments' as causes of awkward and strenuous work postures. They wanted design improvement for some components in their operating room such as operating light and arrangement of workplace.

• Design & Manufacturing
• /
• 제16권4호
• /
• pp.24-33
• /
• 2022

Fiber-reinforced plastics(FRPs) have excellent specific stiffness and strength, so they are usually used as automotive parts that require high rigidity and lightweight instead of metal. However, it is difficult to predict the mechanical properties of injection molded parts due to the fiber orientation and breakage of FRPs. In this paper, the fiber orientation characteristics and mechanical properties of injection molded specimens were evaluated in order to fabricate automotive transmission side covers with FRPs and design a rib structure for improvement of their rigidity. The test molds were designed and manufactured to confirm the fiber orientation characteristics of each position of the injection molded standard plate-shaped specimens, and the tensile properties of the specimens were evaluated according to the injection molding conditions and directions of specimens. A gusset-rib structure was designed to improve the additional structural rigidity of the target products, and a proper rib structure was selected through the flexural tests of the rib-structured specimens. Based on the evaluation of fiber orientation and mechanical characteristics, the optimization analyses of gate location were performed to minimize the warpage of target products. Also, the deformation analyses against the internal pressure of target product were performed to confirm the rigidity improvement by gusset-rib structure. As a result, it could be confirmed that the deformation was reduced by 27~37% compared to the previous model, when the gusset-rib structure was applied to the joining part of the target products.

• 한국직업건강간호학회지
• /
• 제6권2호
• /
• pp.156-167
• /
• 1997

In Korea, based on the Revised Law of Occupational Safety and Health a new entity of institution was set up in 1990 to provide occupational health services to SSE in which three sorts of personnel as a team have to be involved. These institutions, in charge of scores to hundreds of workplace area-wide, have been providing occupational health services without payment from employers or employees, and government reimburses through the Occupational Injury Prevention Insurance since 1993. As a service provider, a team is composed of doctors, nurses and industrial hygienists. Undergraduate and postgraduate educations for the SSE occupational health are not specified and the question on the performance of the personnel has been raised. This study was designed to analyze the facilitating factors of and barriers to the performance and its improvement of these personnel. In 1997, the survey was conducted with all 58 institutions. Structured questionnaires were mailed to 200 personnel who were providing the occupational health service for SSE. The response rate was 51.7% for doctors, 58.6% for nurses, and 60.3% for industrial hygienist, respectively. Results are as follows : 1) There is a guideline for occupational service mandated by the government. Under the guideline, the minimum frequency of visiting workplace is assured with six times of doctors, 17 times for nurse and industrial hygienist in a year. There are one doctor for every 200 factories, one nurse and one hygienist for every 100 factories. 2) All respondents have basic qualification for occupational health service. About 16.7%. of doctors are certified in industrial medicine or preventive medicine, and 64.7% of industrial hygienists had first grade certification. Totally 66.7% of personnel have been involved in occupational health for more than one year. 3) As a support system for the performance improvement, 66.3% respond that they have been provided with educational materials, advice related to industrial environment and guidance of MSDS from Korea Industrial Safety Corporation. Most respondents indicate the lack of concern of employers and employees as a main barrier to the improvement of the service. Also they are in the need of the training opportunity more focused on SSE. The Governments policy for SSE is a principal facilitating factor. Training program focused on SSE situation, manpower, technical support, etc. are areas to be improved to have a better occupational health service for SSE in Korea.

• 품질경영학회지
• /
• 제42권3호
• /
• pp.269-278
• /
• 2014

Purpose: The purpose of this study was to analyze the results of the productivity innovation partnership program and propose the method for improvement. We investigated 90 companies which are sub-contractors of Samsung Electronics, LG electronics, POSCO and so on. Methods: We developed and carried out a survey and analyzed the results of the program. The interviews are also performed. Results: This study shows that the partnership program is a effective method for improving quality and productivity of sub-contractors and it is necessary to extend coverage of this program. Conclusion: We suggested some improvement points of the partnership program and they are to be applied in the next year. The results show that the suggestion is helpful and valuable.

• 한국경영과학회지
• /
• 제12권1호
• /
• pp.111-111
• /
• 1987

With the increasing interest of reducing process variation, statistical process control has served the pivotal tool in most industrial quality programs. In this study, system analyses have been performed associated with a cost incorporated version of a process control, a quadratic loss-based X over bar control chart model. Specifically, two issues, the capital/research investments for improvement of a system and the precision of a parameter estimation, have been addressed and discussed. Through the analysis of experimental results, we show that process variability is seen to be one of the most important sources of loss and quality improvement efforts should be directed to reduce this variability. We further derive the results that, even if the optimal designs may be sensitive, the model appears to be robust with regard to misspecification of parameters. The approach and discussion taken in this study provide a meaningful guide for proper process control. We conclude this study with providing general comments.

• 한국재난정보학회 논문집
• /
• 제2권1호
• /
• pp.113-127
• /
• 2006

The suggestions that follow are about the Qualitative Improvement of private security Industrial. First, in legal and institutional policy, new establishment by law for private security and more support from government is asked. Moreover, the restructuring or M&A between petty companies and the pricing for security service should be performed. Second, in the structural aspect of private security industry, the professional education center for private security guards should be established and the terms of payment and welfare should be improved to the level above standard. In addition, it should be achieved to change the public to have a new and correct understanding of private security and develope the specialized parts suited to the characteristic and ability of each companies. Third, the construction of operating system for private security service should be achieved; recruit system for competent security guards, marketing strategy and enforcement system, widely known confidence to client, normal training system for security guards and post management system for client. This is also to be suited to the characteristic of each companies.

• The Plant Pathology Journal
• /
• 제27권2호
• /
• pp.164-169
• /
• 2011

Previous studies have addressed the management of phyllosphere pathogens by leaf and root-associated microbes. The present study evaluated the effect of the foliar application of three strains of Bacillus spp. on plant growth and fruit quality. The application of a bacilli spore preparation significantly improved leaf growth parameters such as leaf thickness and photosynthesis capacity, indicating that bacilli treatment directly promoted leaf growth. In addition, foliar treatment resulted in an improvement in the key indicators of fruit quality including water, glucose, and sucrose contents. The present results suggest that foliar spraying of beneficial bacilli is a potential treatment of wide application for the improvement of apple quality. Foliar application of bacilli preparation as effective plant growth-promoting rhizobacteria broadens the spectrum of their availability for orchard application.