• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.1
• /
• pp.49-56
• /
• 2008

Reliability has been considered as an important design measure in various industrial systems. We discuss a reliability optimization problem with component choices (ROP-CC) subject to a budget constraint. This problem has been known as a NP-hard problem in the reliability design fields. Several researchers have been working to find the optimal solution through different heuristic methods. In this paper, we describe our development of simulated annealing (SA) and tabu search (TS) algorithms and a reoptimization procedure of the two algorithms for solving the problem. Experimental results for some examples are shown to evaluate the performance of these methods. We compare the results with the solutions of a previous study which used ant system (AS) and the global optimal solution of each example obtained through an optimization package, CPLEX 9.1. The computational results indicate that the developed algorithms outperform the previous results.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.847_848
• /
• 2009

This paper shows the temperature rise of the high voltage GIS bus bar. The temperature rise in GIS bus bar is due to Joule‘s losses in the conductor and the induced eddy current in the tank. The power losses of a bus bar calculated from the magnetic field analysis are used as the input data for the thermal analysis to predict the temperature. The required analysis is a couple-field Multiphysics that accounts for the interactions between three-dimensional AC harmonic magnetic and fluid fields. The heat transfer calculation using the fluid analysis is done by considering the natural convection and the radiation from the tank to the atmosphere. Consequently, because temperature distributions by couple-field Multiphysics (coupled magnetic-fluid) have good agreement with results of temperature rise test, the proposed couple-field Multiphysics technique is likely to be used in a conduction design of the single-pole and three pole-encapsulated bus bar in GIS..

• IE interfaces
• /
• v.17 no.1
• /
• pp.93-103
• /
• 2004

Service importance has been growing increasingly as competition element of enterprises according to going on rapid softness, information and knowledge of industrial infrastructure recently. Quality management system that implemented in manufacturing sector have been spreading rapidly to service company, but the company performing pure engineering service only in construction fields performed mainly the evaluation on the operational aspect such as degree of implementation of the established system because it is difficult to objective evaluation on the activity of the established quality management system or quality assurance system. This study would like to make on offer the improvement points based on the evaluation of service quality and the itself evaluation result through the questionnaire on the service offerers and customers using the pre-qualified SERVQUAL model in establishment of the improvement goal of the company. According to the result of this study, it is analyzed a gap and required to establish a counter-plan to correct many gaps discovered between the real offered level and the expect level of custom.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.7
• /
• pp.963-977
• /
• 2015

The well-characterized gram-positive bacterium Bacillus subtilis is an outstanding industrial candidate for protein expression owing to its single membrane and high capacity of secretion, simplifying the downstream processing of secretory proteins. During the last few years, there has been continuous progress in the illustration of secretion mechanisms and application of this robust host in various fields of life science, such as enzyme production, feed additives, and food and pharmaceutical industries. Here, we review the developments of Bacillus subtilis as a highly promising expression system illuminating strong chemical- and temperatureinducible and other types of promoters, strategies for ribosome-binding-site utilization, and the novel approach of signal peptide selection. Furthermore, we outline the main steps of the Sec pathway and the relevant elements as well as their interactions. In addition, we introduce the latest discoveries of Tat-related complex structures and functions and the countless applications of this full-folded protein secretion pathway. This review also lists some of the current understandings of ATP-binding cassette transporters. According to the extensive knowledge on the genetic modification strategies and molecular biology of Bacillus subtilis, we propose some suggestions and strategies for improving the yield of intended productions. We expect this to promote striking future developments in the optimization and application of this bacterium.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.2
• /
• pp.11-14
• /
• 2004

YBCO thin films have good characteristics for current limiting materials due to compact size and high current carrying capability. But the irregularities and the extreme thin thickness of YBCO films cause some difficulties in simultaneous quench and thermal shock protection. In order to solve these problems, vertical magnetic field generated from solenoid coil was applied to the YBCO element. And also to minimize the inductance caused by the serial connection of magnetic field source with superconducting elements, magnetic field source was separated from the power lines adapting protective current transformer. In this study, electric field-current (E-I) and quench characteristics of YBCO films were analyzed both by electrical measuring method and observations of bubble propagation. From the experiment results, it was revealed that the magnetic fields generated by surrounding coil could induce the uniform quench distribution for all stripes of current limiting units and finally simultaneous quenches were realized in all serial connection of YBCO elements. In addition, the separation of magnetic field source form electrical network could be good solution for simultaneous quench of YBCO films without any unnecessary effect caused by serial connection.

• Wind and Structures
• /
• v.11 no.6
• /
• pp.455-478
• /
• 2008

The present study aims to estimate the wind ventilation performance for pedestrian level domains from the air quality point of view. Three typical models of a dense urban area were considered and numerically simulated in order to examine the effects of the geometry of such models on wind flow characteristics, which in turn affect the air quality, within the pedestrian domain of a street canyon located within this area. The calculated flow fields were employed to estimate the exceedance probabilities within the study domain using a new approach: air exchange rate within the domain. The study has been applied to nine cities in Japan: Tokyo, Osaka, Sapporo, Niigata, Fukuoka, Nagoya, Sendai, Yokohama, and Kyoto, based on their mean wind velocity data. The results demonstrated that the exceedance probability analysis of the pedestrian wind environment could be a valuable tool during the design stage of inhabited areas for the evaluation of pollutant-removal efficiency by the applied wind. Also, the calculated probabilities demonstrated substantial dependence on both the geometry of building arrays and the wind conditions of the nine cities.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.675-676
• /
• 2006

This paper shows the temperature rise of the high voltage GIS bus bar. The temperature rise in GIS bus bar is due to Joule's losses in the conductor and the induced eddy current in the tank. The power losses of a bus bar calculated from the magnetic field analysis are used as the input data for the thermal analysis to predict the temperature. The required analysis is a couple-field Multiphysics that accounts for the interactions between three-dimensional AC harmonic magnetic and fluid fields. The heat transfer calculation using the fluid analysis is done by considering the natural convection and the radiation from the tank to the atmosphere. Consequently, because temperature distributions by couple-field Multiphysics (coupled magnetic-fluid) have good agreement with results of temperature rise test, the proposed couple-field Multiphysics technique is likely to be used in a conduction design of the single-pole and three pole-encapsulated bus bar in CIS..

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.2
• /
• pp.211-225
• /
• 2014

Globalization in the 21st century and development in the field of IT have caused rapid change in the practical site of fashion industry. Therefore, as colleges aim to produce professional technicians and experts in the applicable fields, they are strengthening professionalism and practicality more than ever before that can respond to the practical situation. In addition, owing to the reduction of population of academic students, colleges would search for specialty and structural innovation with the serious desire to establish new structural system to produce talented persons. Purpose of this study is to strengthen competition of colleges voluntarily, specialize themselves and maximize mutual benefit through cooperative relation with industrial businesses. Thus, this study would compare, analyze and investigate the curriculums of fashion designs in colleges for the plan of curriculum applicable for the industrial changes and corresponding business demand. Considering the result of questionnaires of industrial businesses, most of them would prefer the curriculum for 3 years to that for 2 years. Nowadays industrial businesses will require computerization ability much more than ever before besides the professional knowledge and technology in the field of fashion and it is also showed that education of personality in colleges would be considered to be important for the performance of the vocational duty. Especially, specialty and progressive participation in the curriculum would be strengthened during the education process of colleges. This study will be used for the establishment of specialty of colleges and development of curriculum of them.

• Journal of the Korean Society of Safety
• /
• v.22 no.6
• /
• pp.74-80
• /
• 2007

In manufacturing industry, machining technology for metal cutting processes has been considered traditional and economic dimensions such as production cost, production time and quality of a final product. However, owing to governmental regulations and the change of owner's cognizance, the safety of the workers becomes important in those fields. In this paper, the operation planning system developed as a key component of CAPP(Computer Aided Process Planning) system is introduced for milling operations. The main issue in the system is to determine the cutting conditions in achieving a balanced consideration of productivity and worker's safety. For this reason, the system performs the modification process of standard cutting conditions to satisfy those requirements. Related to machining safety in metal cutting, representative and habitual mistakes that operators perform without considering carefully the characteristic of machine or work piece are described and then the detailed algorithm and functions of the developed system is introduced and discussed.

• Korean Journal of Metals and Materials
• /
• v.48 no.5
• /
• pp.462-468
• /
• 2010

Carbon Nanotubes (CNTs) have recently emerged as a material with outstanding properties. It has shown promising potential for applications in many engineering fields as electronic devices, thermal conductors, and light-weight composites. Researchers have investigated their use as reinforcements in themetal matrix composites of CNTs. In the present work, we decorated CNTs with Ni particles by electroless plating. The CNTs were wet-ball milled for various milling times with a nickel sulfate solution. The precipitated Ni particles were observed mainly by FESEM. In this study, the dispersion of the CNTs and Ni particles was improved with the addition of the surfactant. Also, as the CNTs were shortened and widened by an increased ball milling time, the size of the precipitated Ni particles increased. It was estimated that the CNTs were deformed and caused some defects on their surface during the ball milling process. Those defects were assumed to be heterogeneous nucleation sites for the Ni particles.