• 한국산업보건학회지
• /
• 제6권2호
• /
• pp.222-248
• /
• 1996

This study was designed to survey misused expression in 37 KS (Korean Industrial standards) related to personal protective equipment. The results were as follows: 1. One hundred and twenty five misused expressions were found - 44 expressions were used illogically (35.2 %). 80 expressions were wrongly described (64.0 %) The types of illogically misused are: 10 illogical cases, 4 cases of a wrongly designated provision when cited, 12 cases of the lack of provisons for KS, 7 cases of a inappropriate uses of units, 8 cases of an overlapped sizes between standards. - The types of expressions wrongly described are: 30 cases of confusion in using an terms, 4 case of making an error when proofreading, and 29 cases of choosing words not appropriate to describe technical standard, 18 cases of unclear provisons due to missing phrases and terms, and 11 cases of provisons described differently from original intended purposes. 2. There is one case, where the same standard is categorized as two different names. There are three major causes of the misused expressions as seen from the following summary: - Imitated the developed countries' standards without filtering them by considering domestic law and ocher KS standards. - Tended to create each definition for each standard instead use of the basic standard. - Insufficiency of synthetic examination to the correlation between standards.

• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3319-3325
• /
• 2012

본 논문은 반도체 포토장비의 이산 이벤트 시뮬레이터인 TrackSim의 개발에 관한 것이다. TrackSim은 포토 장비의 시뮬레이션 엔진과 사용하기 쉬운 사용자 환경을 포함하는 시뮬레이터로, 다양한 프로세스 모듈의 구성 및 운영 방법을 효율적으로 평가, 검증, 스케쥴링할 수 있는 3차원 시뮬레이션 환경을 제공한다. TrackSim은 반도체 산업에서 많이 사용되는 이산 사건 시뮬레이션 소프트웨어인 AutoMod를 기반으로 개발되어 시뮬레이션 신뢰성이 보장되며, AutoMod로 개발된 반도체 제조라인 시뮬레이션 모델 속에 함께 연동하여 사용이 가능하다는 특징이 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.752-755
• /
• 2009

현재 국내외 주요 생산 현장에서 자동화 시스템이 구축되어 활발히 응용되고 있지만, 대부분 유선통신망을 이용한 시스템으로 생산 설비 기기 및 검사 장비의 교체 시 많은 시간적, 경제적 비용이 발생하는 단점이 있다. 이를 위해 IEEE 802.15.4(ZigBee) 표준기술을 이용한 반도체 검사장비의 제어 및 관리 시스템의 인터페이스를 구현하였다. 본 논문에서는 무선 네트워크 환경에서 저비용의 신뢰성 있는 통신 방식인 ZigBee 기술을 적용하여 공간적 복잡도를 해소하고, 서로 다른 장비간의 유선 통신망을 무선으로 통합한 시스템의 사용자 인터페이스(UI: User Interface)를 연구하였다.

• 반도체디스플레이기술학회지
• /
• 제20권2호
• /
• pp.6-13
• /
• 2021

Cases and studies on the selection method of CTQ are relatively active, but there are few cases or studies on the selection method of CTP which is important in the device industry. In fact, many companies simply select and manage CTP from the point of contact based on their experience and intuition. The purpose of this study is to present an evaluation model and a mathematical decision model for rational and systematic CTP selection to improve the process quality of semiconductor equipment lines. In the evaluation model, AHP (Analytic Hierarchy Process) analysis technique was applied to show objective and quantitative figures, and Fuzzy decision-making model was used to solve the ambiguity and uncertainty in the decision-making process. Decision Value (DV) was presented. The subjects were 22 process factors managed in the Plating Process that the representative equipment line can do. As a result, the evaluation model proposed in this study can support more efficient and effective decision-making for process quality improvement by more objectively measuring the problem of subjective CTP selection in manufacturing sites.

• 산업경영시스템학회지
• /
• 제45권3호
• /
• pp.66-77
• /
• 2022

Digitization and automation technologies have rapidly maximized productivity and efficiency in all industries over the past few decades. Construction automation technology has either stagnated over the same period or has not kept pace with overall economic productivity. According to the research studies up to now, the output of concrete structures using coarse aggregates (8mm or more) is very limited due to the limitations of equipment and materials. In this study, information on the development process of 3DCP equipment that can print concrete structures with the printing width (100 mm or more) and printing thickness (30 mm or more) using a 3DCP material mixed with coarse aggregate (8 mm or more) is provided. To verify the performance of the developed 3DCP equipment, experimental data are provided on output variables, the number of layers, and the inter-layer printing time interval. The evaluation and verification data of various mechanical properties (compressive and splitting tensile strength) of printed materials using coarse aggregates are provided.

• 열처리공학회지
• /
• 제36권2호
• /
• pp.86-95
• /
• 2023

This paper explained the equipment and process development to secure the source technology of controlled nitrification technology. The nitriding potential in the furnace was controlled only by adjusting the flow rate of ammonia gas introduced into the furnace. In addition, a control system was introduced to automate the nitriding process. The equipment's hardware was designed to enable controlled nitriding based on the conventional gas nitriding furnace, and an automation device was attached. As a result of measuring the temperature and quality uniformity for the equipment, the temperature and compound uniformity were ±1.2℃ and 14.3 ± 0.2 ㎛, respectively. And, it was confirmed that nitriding potential was controlled within the tolerance range of AMS2759-10B standard. In addition to parts for controlled nitriding, it was applied to products produced in existing conventional nitriding furnaces, and as a result, gas consumption was reduced by up to 80%.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.69-77
• /
• 2023

Recently, carbon composites have been applied to various fields. However, carbon composites have not been applied to the fishing vessel field due to its structure standards centered on glass composites. In this study, a structural strength evaluation study was conducted for the application of carbon composites in the fishing vessel field. Hull minimum thickness verification test and hull joint verification test were conducted. Compared to glass composites, the verification was based on equivalent or better performance. The results show that carbon composites can reduce the weight by 20% compared to glass composites. For hull joints, it was necessary to increase the thickness of the joint seam by the thickness of the hull to apply carbon composite. Through this study, a standard for the application of carbon composites to fishing vessel can be established.

• 한국기계가공학회지
• /
• 제18권9호
• /
• pp.29-35
• /
• 2019

The structure of the machinery industry due to the 4th industrial revolution is changing from precision and durability to intelligent and smart machinery through sensing and interconnection(IoT). There is a growing need for research on prognostics and health management(PHM) that can prevent abnormalities in processing machines and accurately predict and diagnose conditions. PHM is a technology that monitors the condition of a mechanical system, diagnoses signs of failure, and predicts the remaining life of the object. In this study, the vibration generated during machining is measured and a classification algorithm for normal and fault signals is developed. Arbitrary fault signal is collected by changing the conditions of un stable supply cutting oil and fixing jig. The signal processing is performed to apply the measured signal to the learning model. The sampling rate is changed for high speed operation and performed machine learning using raw signal without FFT. The fault classification algorithm for 1D convolution neural network composed of 2 convolution layers is developed.

• 산업경영시스템학회지
• /
• 제3권3호
• /
• pp.41-48
• /
• 1980

Industrial Psychology is to study and analyze human behavior or working at operation, both to look into the rules in that and to make analysis of rules made from theological basis adapted to reality, wi th methods and knowledges that Psychology gives, by methods that are observation, experiment , investigation and so on, to contribute to improving the production efficiency and promoting the Laborer's welfare, In this paper, the side of Psychology in labor accidents will be studied as follows. 1.The Presentation of Problems 1.1. Concept prescription of Industrial Psychology 1.2. Relation between Industrial psychology and accidents 2.The Theorical approach of Industrial Psychology for accident study 2.1 Industrial Psychology in approach of accident study 2.2. Cooperative effort from other corvelative science 3. Industrial Psychologic observation on important safety policy 3.1. Study of accident origin 3.2. Safety of material equipment 3.3. Safety of work condition 4. Industrial psychological subject on safety instruction development 4.1. Safety instruction and attitude of laborers 4.2. Operation of safety rules 4.3. Safely counselling 4.4. Measures for the injured 5. Conclusion.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2004년도 동계학술대회 논문집
• /
• pp.73-73
• /
• 2004