• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.126-131
• /
• 2017

This paper designs a smart safety measurement system with Bluetooth beacon sensor nodes that can provide risk detection and evacuation/countermeasure services. The Bluetooth beacon sensor nodes is easily able to be attached to old building wall or construction or civil structure with potential danger. The proposed smart safety measurement system transmits various sensor data such as acceleration, gyroscope, geomagnetic, pressure, altitude, temperature, humidity at the spot where Bluetooth beacon sensor nodes are installed, and we can use them for risk perception, prediction, and warning services. To verify the effectiveness of the proposed system, we performed filed tests which showed that measured displacement values of precast retaining walls were within the permitted displacement value of 38.5 mm.

• Composites Research
• /
• v.29 no.4
• /
• pp.167-172
• /
• 2016

$Co_9S_8/reduced$ graphene (CSRG) has been prepared by a facile two step hydrothermal method and used as a supercapacitor electrode material. It is anticipated that the $Co_9S_8$ and reduced graphene oxide (RGO) would serve as a spacer material to each other to stop the agglomeration and simultaneous contribution of electrical double layer capacitance (RGO) and pseudocapacitance ($Co_9S_8$) would provide high electrochemical properties. The chemical analysis has been done by Fourier transform infrared spectroscopy and the morphology is characterised by field emission scanning electron microscopy. CSRG shows a high electrical conductivity of $98S\;m^{-1}$. The symmetric supercapacitor shows a specific capacitance of ${\sim}728F\;g^{-1}$ with a current density of $2A\;g^{-1}$. CSRG also showed an energy density of $25.2Wh\;kg^{-1}$ with a power density of $1000W\;kg^{-1}$.

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.225-231
• /
• 2014

In this study, we used polypropylene grafted with itaconic acid (PP-g-IA) as a compatibilizer to prevent phase separation phenomenon which occurs upon blending polypropylene (PP) and ethylene-vinyl alcohol copolymer (EVOH). A compatibilizer was prepared using graft copolymerization of itaconic acid (IA) onto PP where input ratio of IA was 1, 2, 5, and 10 wt.%. To confirm the structure of PP-g-IA and the graft ratio of IA onto PP, we used $^1H$ NMR and FT-IR. We tested the compatibilizer which has highest graft ratio of 1% in immiscible PP/EVOH blends. The morphologies of PP/PP-g-IA/EVOH blends were analyzed by SEM. Thermal and mechanical properties of the blends were analyzed by DSC and UTM. PP-g-IA enhanced the interfacial adhesion of PP and EVOH copolymer.

• Journal of Convergence for Information Technology
• /
• v.7 no.4
• /
• pp.185-194
• /
• 2017

The purpose of this study was to evaluate the association between industrial workers' job stress and oral health related quality of life and subjective happiness. The subjects of this study were 228 workers, from August 8 to September 2, 2016, research tool was the structured, anonymous, self-administrated questionnaire. The data were analyzed by SPSSWIN 18.0, t-test and one way ANOVA, Scheffe' post hoc test, Pearson correlation and Hierarchial multiple regression. Negative correlation was found between job stress and OHIP-14 and between job stress and subjective happiness and positive correlation was found between OHIP-14 and subjective happiness. As for the explanatory power of the independent variables affecting subjective happiness, gender, self-reported living status, self-reported general health, dental checkups, and job stress were significant variables. It is therefore necessary to run an industrial oral intervention program on a regular basis and cope positively with stress with the objective of helping workers improve their subjective happiness.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.273-289
• /
• 2021

This study aimed to examine the appearance of heated clothing in relation to fashion trends by analyzing constructive components of clothing using product images and actual products. A total of 91 images of domestic and foreign heated clothing products were collected, and a product analysis conducted with six parameters of item classification, namely, concept and image, silhouette, color, number of heating elements, and heating parts. In addition, an in-depth analysis was carried out with 11 products among them, while focusing on further detailed components of the design and heating system. As a result, the overall exterior design of domestic products has been changed from outdoor clothing to daily clothing reflecting the current design trend. Compared with domestic products, foreign products showed a diverse assortment and a greater number of heating regions per individual item of clothing. The current heating system commonly consists of a heating element, power source, controller board, and wires, although the existence and type of switches differed from product to product. To develop a more efficiently heated clothing to expand the market, the design, ease of use, safety, consumer preference, heating functionality, and durability should be considered. Along with design recommendations for future heated clothing, this study also provides a practical guide to the technical aspects of the design of the components of heated clothing.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.131-139
• /
• 2018

The purpose of this study is to examine the dental hygienists' awareness on the 4th industrial revolution in preparation for the future of dental treatment field. A questionnaire survey was conducted on 209 dental hygienists who are working at dental clinics in Daegu city and the results were as follows. The average awareness on the 4th industrial revolution was 2.41, which is comparatively low. In each section, the willingness to education was 2.87, the influence to dental field was 2.81, the perception degree was 2.25 and the preparation degree was 1.72 which is relatively low. The awareness according to general characteristics, there was a significant difference from age and workplace in influence to dental field (p<0.05, p<0.001), from job position and academic degree in willingness to education (p<0.05). According to the study of correlation among awareness, influence, preparation and willingness of education to 4th industrial revolution. Also there was a positive (+) correlation in everyway, as awareness level is high, the degree of influence, preparation and willingness of education are also high. In conclusion, to prepare for the future medical convergence, it is necessary to raise concern and change in perception to high medical technology by developing and offering diverse education programs as to 4th industrial revolution to dental hygienists.

• Convergence Security Journal
• /
• v.15 no.7
• /
• pp.39-45
• /
• 2015

Industrial secrets that companies own recently protected by various act related industrial security such as Trade Secret Act, Act on Prevention of Divulgence and Protection of Industrial Technology, etc. However, despite such protection infringement and leakage accidents of industrial secrets is increasing every year. According to a survey conducted by KAITS(Korean Association for Industrial Technology Security) annual average of estimated damage by industrial secrets leakage is estimated to be "50 trillion won." This is equivalent to the amount of annual revenue of small businesses more than 4,700 units. Following this, industrial secrets leakage causes serious damages to competitiveness of nation and companies and economic. However investment and effort to the industrial secrets leakage crime is lack of level compared to the scale of damage. Actually, most companies except some major companies are lack of response action about industrial secrets leakage because of shortage of separate organization, workforce, budget for industrial secrets leakage security. This paper aims to understand the overall flow of the industrial secrets leakage crime through various taxonomy such as cause of occurrence and leakage pathway and grasp the condition of damage from industrial secrets leakage through analyzation of internal and external industrial secrets leakage crime. This is expected to be the basis for related research.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_2
• /
• pp.181-189
• /
• 2020

As production, distribution, consumption and processing increase with the development of industrial societies, the importance of resource depletion and environmental problems is increasing day by day. This has led to increased research and interest in remanufacturing that can satisfy both environmental and economic aspects. Currently, the remanufacturing industry is progressed in Korea with automobile parts with as the central figure, and it needs to be expanded into various areas. In this study, the failure type analysis and FMEA were performed on the hydraulic pumps used in construction and industrial sites for the development of the standard remanufacturing process plan, and the actual disassembly and reassembly process was carried out. Remanufacturing products were manufactured through the analysis contents and drawing process, performance tests were conducted in accordance with RS B1501 criteria to evaluate performance, and all of these products passed the test criteria.

• Convergence Security Journal
• /
• v.20 no.3
• /
• pp.109-114
• /
• 2020

Currently, in the 4th industrial revolution era(4IR), the convergent infrastructure has been established by actively utilizing data based on the existing digital technological innovation in the 3rd industrial revolution. Thus, the technological innovation based on the knowledge-information society needs to put innovative efforts for creating new business models in various areas. Thus, this study aims to present an Electronic Security Framework by suggesting the Cyber-Physical Security System(CPSS) that could more accurately predict and efficiently utilize it based on structured data obtained by collecting, analyzing, and processing an enormous amount of unstructured data which is a core technology distinguished from the 3rd industrial revolution.

• Convergence Security Journal
• /
• v.8 no.4
• /
• pp.21-30
• /
• 2008

This study researched into the method that allows only the certified user and computational engineer to possibly use network resources and computing resources by implementing the system of the intensified certification and security based on LDAP(Lightweight Directory Access Protocol) directory service, that copes with incapacitation in security program due to making the security program forcibly installed, and that can correctly track down the industrial-technology exporter along with applying the user-based security policy through inter-working with the existing method for the protection of industrial technology. Through this study, the intensified method for the protection of industrial technology can be embodied by implementing the integrated infra system through strengthening the existing system of managing the protection of industrial technology, and through supplementing vulnerability to the method for the protection of industrial technology.