• Geophysics and Geophysical Exploration
• /
• v.8 no.2
• /
• pp.145-155
• /
• 2005

A two-dimensional (2-D) interpretation of MT data has been performed for the purpose of fracture detection for geothermal development. Remote stations have been operated in Kyushu, Japan (480 km apart) as well as in Korea (60 km and 165 km apart in 2002 and 2003 data set, respectively). Apparent resistivity and phase curves calculated by remote processing with the Japan remote data showed enough quality for 2-D inversion for the whole frequency range. Remote reference processing with Korea remote reference data also showed quite good continuity in apparent resistivity and phase curves except some noisy frequency bands; around the power frequency, 60 Hz, and around the dead band $10^{-1}Hz\;Hz\;\~1\;Hz$, where the natural EM signal is known to be very weak. Even though the subsurface showed severe three-dimensional (3-D) characteristics in the survey area so that 2-D inversion by itself could not give enough information for deep geological structures, the 2-D inversion for the 5 survey lines showed several common features. The conductive semi-consolidate mudstone layer is dipping from north to south (about 500 m depth on the south and 200 m on the north most part of the survey area). The boundary between the low (L-2) and high (H-2) resistivity anomalies can be thought as a major fault with strike $N15^{\circ}E$, passing through the sites 206, 112 and 414. The shallow (< 1 km) conductive anomalies (L-4) seem to be fracture zones having strike E-W (at site 105) and $N60^{\circ}W$ (at site 434). And there exists a conductive layer in the western and west-southern part of the survey area in the depth below $2\~3\;km$, for which further investigation is to be needed.

• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.387-394
• /
• 2012

The study was conducted to develop an effective forest resources use models for an alternate use of abandoned quarry by an attitude survey. According to the result of survey, a pessimistic view due to dust, noise pollution, and forest damage was 5% higher than an affirmative view by economic benefits from the development of quarry. The 42% of the respondents preferred the alternate use of abandoned quarry and the 25% of the respondents wanted an art and cultural space. The optimum size of alternate use was 5-10 ha (43%) with the requirement of nearby residents (32%). According to the SWOT analysis for abandoned quarry, the strength factors were an effective use of land, the content development of modern industrial inheritance + cultural and art fusion, attraction for nearby city and visitors, a harmony of beauty landscape and clean environment, and a sustainable increase of domestic and foreign visitors with the 5-day-work week. The opportunity factors were the improvement of traffic networks through KTX and local highway, the creation of the new growth engines with the establishment of artistic creation belts, the providing of unique cultural and art space through grafting of tour and education, the creation of local income through stone processed goods, and the vitalization of local development through eco-city. The weakness factors were a psychological remoteness and backwardness, and the weakness of staying tour infra. The threat factors were a poor financial support for sustainable development in nearby quarry and a modify of legal and institutional system for the alternated use of abandoned quarry. The developed restoration models for the alternate use in abandoned quarry are classified to a sculpture park, a waterfall and lake park, a rock-climbing, a sports park + forest park, a native botanical garden, a culture and art park, a complex park, a water storage site, a water storage site to extinguish forest fire, a geriatric hospital, an agricultural facility, and a school site types etc. The results suggest that the alternate use in the abandoned soil and stone quarry is needed to establish facility use models with consideration of user's preference.

• Journal of Bio-Environment Control
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2009

The greatest and major cost for cut rose production during winter seasons in Korea is cost of heating the greenhouse. A study was conducted on a cost-efficient heating system to reduce expenses of cut rose growers in times of high energy prices. An infrared heating system utilizing radiant energy has an obvious advantage over other heating methods in that the energy is first used to raise temperatures of plants and other objects and subsequently that of the atmosphere, resulting in faster reaching to desired plant temperatures at a reduced heating cost. In this study the heating effect and heating cost saving of a nano-carbon fiber infrared heating system (NCFIHS) installed in cut rose greenhouses in Gimhae, Gyeongnam Province were analyzed comparatively. In addition growth, quality, and vase life of 'Orange Fresh' roses grown in greenhouses heated by NCFIHS against those grown in greenhouses heated by so called an electrical heating system. In greenhouses with a NCFlHS with a set point air temperature of $20^{\circ}C$, plant temperature was maintained at $1{\sim}2^{\circ}C$ higher than the air temperature, and temperatures of growing bed surface and root zone were maintained at $17{\sim}19^{\circ}C$ throughout cold winter nights. The cost for heating in NCFIHS was about 25 and 51% of that of an electrical heating system and a hot water heating system heated by petroleum, respectively. Growth of roses harvested in greenhouses with a NCFIHS was similar to those grown in greenhouses with an electrical heating system. However, cut roses with more intense petal and leaf colors and a longer vase life (fresh weight and amount of water uptake) were harvested in greenhouses with a NCFIHS as compared to those harvested in greenhouses with an electrical heating system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.8
• /
• pp.1029-1034
• /
• 2012

In this study, we compared the antioxidant activities of three loquat (Eriobotrya japonica Lindl.) by cultivars (Daebang, Bubang and native cultivar). The leaves were extracted by 80% ethanol and then fractionated with various solvents (n-hexane, ethyl acetate, n-butanol, and water) for biological activities and bioactive compounds analysis. Total polyphenol content of extracts and fractions was in the range of 84.93~478.50 mg/g gallic acid equivalent (GAE). From highest to lowest GAE, the fractions were n-butanol> ethyl acetate> n-hexane> 80% ethanol> water. Among the three cultivars, the highest polyphenol content was found from native cultivar. As for DPPH radical scavenging activity, the n-butanol fraction showed the highest activity, and native cultivar was the highest on the $IC_{50}$ values (0.18 mg/mL). In the nitrite scavenging activity, the ethyl acetate fraction (54.99~60.86%) showed the most effective activity on the Bubang cultivar was higher than others. The ursolic acid content of the ethyl acetate fraction showed the highest (51.41 mg/g) in the Daebang cultivar. Based on all these results;the Bubang cultivar showed relatively higher antioxidant and nitrite scavenging activities, but the ursolic acid content was higher in the Daebang cultivar. These results suggest that extracts from loquats (Eriobotrya japonica Lindl.) can be used as bioactive and functional materials that could be important information for industrial use in the future.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.139-146
• /
• 2015

The amount of by-product from sulphur increases in domestic industrial facilities. However, the amount of its consumption is limited so that the amount of unused sulphur continues to increase. Therefore, in this study, the use sulfur polymer as the concrete surface protecting material was conducted. The compressive strength showed that as the substitution ratio of filler increased up to 40%, the compressive strength also increased. A high compressive strength was shown at the curing temperature of $40^{\circ}C$ (SS, FA) and $60^{\circ}C$ (OPC) according to the type of filler. The difference of compressive strength between air dry curing and water curing was insignificant so that there was no significant influence of moisture during curing process. The evaluation result of bond strength showed that the highest bond strength was shown at the air-dry condition of $40^{\circ}C$ regardless of type of filler. Bonding didn't occur properly during water curing in comparison to air dry curing. Also, in case of the specimen cured at $60^{\circ}C$, discoloration and hair cracks appeared due to the influence of temperature, and the highest bond strength was shown at the substitution ratio of 20% (SS, FA) and 30% (OPC) according to the type of filler. The releasing test result of harmful substance showed that no harmful substance was released, so there is no harmfulness in the surface protecting material using sulfur polymer. As a conclusion drawn in this study, it is most appropriate to substitute silica by approximately 20%, mix and cure at the air-dry condition of $40^{\circ}C$ in order to use sulfur polymer as the surface protecting material.

• Korean Journal of Organic Agriculture
• /
• v.13 no.4
• /
• pp.401-412
• /
• 2005

This study was conducted to examine the effects of dietary Mogchotan(the mixture of charcoal and pyroligneous acid, 80:20, w/w) supplementation on fattening performance, fatty acid composition and the physico-chemical characteristics of meat in pigs. The present study was also stressed to investigate the possibility of industrial utilization of charcoal and pyroligneous acid as a livestock feed additive. Weight gain and feed conversion in pigs fed the Mogchotan supplemented diet were higher than those of the control group. In fatty acids composition, palmitic acid(C16:0) contents of Mogchotan treatment groups were lower than that of control group. However, Mogchotan supplementation increased C16:1, C18:0, C18:1, C18:2 and C18:3 contents when compared with control group pigs. Also, Mogchotan supplementation groups decreased saturated fatty acids level than control group. On the other hand, Mogchotan supplementation showed higher unsaturated fatty acids value, especially polyunsaturated fatty acids value compared to control group. The carcass pH of pigs fed the Mogchotan tended to be higher than control, but was not significantly different. The water holding capacity was significantly higher in pigs fed the 3.0% Mogchotan-supplemented diet than those of other treatment groups(p<0.05). Altogether, it has been suggested that dietary $1{\sim}3%$ of Mogchotan supplementation improved the fattening performance and meat quality in pigs.

• Korean Journal of Poultry Science
• /
• v.30 no.4
• /
• pp.259-267
• /
• 2003

Two experiments were conducted to investigate the effect of betaine on egg production, lipid metabolism, and osmoregulation in 18-to 42-week-old ISA Brown laying hens. In experiment 1, three hundred and sixty one hens were fed a com-soy basal diet contailing 16% crude protein (CP), 2800 kcal/kg metabolizable energy (ME), 0.33% methionine, and 0, 300, 600, or 1200 mg betaine per kg diet. Egg production, egg weight, feed consumption, feed conversion, and egg quality were measured every eight weeks. Betaine concentration in live and egg were determined along with serum cholesterol, abdominal fat, total serum protein and albumin levels. In experiment 2, twenty thirty-three-week-old laying hens were fed the same diets as those used in experiment 1 in individual cages and the amount of feed and water consumption were measured for two weeks. At the end of experiment 2, all birds were killed to determine blood plasma and ileal osmopressure, arginine vasotocin (AVT), and liver moisture content. In experiment 1, egg production between the treatments during the first eight weeks were not different, whereas the significant increment of egg production were noticed in the birds fed more than 600 ppm betaine after reaching the peak egg production stage (p<0.05). The egg weight was reduced significantly by the betaine supplementation for the first 8 weeks (p<0.05). Feed conversion tended to improve by betaine supplement. Egg quality was not enhanced by betaine supplementation. Liver betaine level increased with betaine feeding compared to the control but betaine concentration in eggs decreased with betaine supplementation. Betaine supplementation elevated the level of serum total cholesterol and triglyeerides compared to the control. Abdominal fat content was increased by betaine supplementation, whereas liver fat content decreased. In experiment 2, water consumption significantly increased in hens fed diets containing 300 and 600 mg betaine/kg (p<0.05) and osmotic pressure of ileal digesta increased with betaine supplement. Liver moisture content was not affected by betaine, but AVT increased in hens fed betaine. The overal results suggested the possibility of using betaine as a feed additives in the laying hens beacuse of its positive contribution to improving egg production and other metabolic parameters related to lipid metabolism.

• Journal of Food Hygiene and Safety
• /
• v.22 no.1
• /
• pp.29-36
• /
• 2007

The using frequency of processed foods and dietician's perception against management of food service at 98 food service institutions located in Jeollabuk-Do were surveyed. Food service institutions included 13 hospitals,38 schools,40 enterprises, and 7 others. Single menu (75.5%) with two (33.7%) or three (57.1%) side dish was offered. In addition, the offering ratio of boiled water and spring water was 37.8 and 32.7%, respectively. The processed foods with high using frequency were kochujang (1.19), sesame oil (1.22), and doenjang (1.30), but that of leek, onion, Chinese cabbage, and radish were 4.95, 4.62, 4.60, and 4.26, respectively. Dietician's major affairs in all type of food service institutions were cooking (64.3%), purchase (48.0%), and personnel managements (39.8%). Dieticians, however, had a low perception against safety and nutrition management. Therefore, in order to prevent the outbreak of food-borne diseases, we estimated that the education and the conversion of dietician' perception against safety and nutrition management were needed.

• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1158-1164
• /
• 1998

Aluminium sulfate solution was prepared by sulfuric acid treatment from gibbsite. Aluminium sulfate hydrate [$Al_2(SO_4)_3$ · $nH_2O$] was precipitated from aluminium sulfate solution by adding it into ethylalcohol. From XRD analysis as-prepared $Al_2(SO_4)_3$ · $nH_2O$ was confirmed to have mixed-crystalization water(n=18, 16, 12, 6). The average water of crystalization calculated from thermogravimetry(TG) was 14.7. Aluminium sulfate hydrate [$Al_2(SO_4)_3$ · $nH_2O$] was thermally decomposed and converted to $Al_2(SO_4)_3$ at $800^{\circ}C$, $\gamma-Al_2O_3$ at $900-1000^{\circ}C$, and $\alpha-Al_2O_3$ at $1200^{\circ}C$. Ni-doped $\gamma-Al_2O_3$, was synthesized from the slurry of as-prepared $\gamma-Al_2O_3$, with the ratio of [Ni]/[Al]=0.5. The reaction conditions of synthesis were determined as initial pH 9.0 and temperature $80^{\circ}C$ The basicity(pH) of slurry was controlled by using urea and $NH_4OH$ solution. Urea was also used for deposition-precipitation. For determining termination of reaction, the data acquisition was performed by oxidation reduction potential(ORP), conductivity and pH value in the process of reaction. Termination of the reaction was decided by observing the reaction steps and rapid decrease in conductivity. On the other hand, BET(Brunauer, Emmett and Teller) and thermal diffusity of Ni- doped $\gamma-Al_2O_3$, with various content of Ni were measured and compared. Thermal stability of Ni- doped $\gamma-Al_2O_3$ at $1250^{\circ}C$ was confirmed from BET and XRD analysis. The surface state of Ni-doped $\gamma-Al_2O_3$ was investigated by X-ray photoelectron spectroscopy(XPS). The binding energy at $Ni2P_{3/2}$ increased with increasing the formation of $NiAl_2O_4$ phase.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.3
• /
• pp.155-162
• /
• 1976

Forty one samples from thirty three species of algae (19 from 15 species of Rhodophyceae, 18 from 14 species of Phaeophyceae, 3 from 3 species of Chlorophyceae, and 1 of marine Phanerogams) collected from several locations on the east, west and south coast of Korea, were analyzed for their contents of crude protein, fat, cellulose, ash, nitrogen free extract, amino nitrogen, and total amino acids. For the examination of extractability of algal protein with water, 4 species of algae, Sargassum thunberggi, Grateloupia filicina, Phyllospadix japonica, and Sargassum confusum, were analyzed. And the effect of some precipitation treatments for isolation of algal protein was also tested. As a matter of fact, Rhodophyceae showed high content in crude protein and low in crude fat while the case was opposite for Phaeophyceae and Chlorophyceae. Refering to the content of crude protein and total amino acids, the recommendable algae for protein sources were Sargassum thunbergii, Acrosorium flabellata, Phacelocarpus japonicus, Laurencia okamurai, Laurencia intermedia, Grateloupia filicina, Chondrus ocellatus, Gloiopeltis furcata, Gigartina tenella, Dictyota dichotoma, and Scytosiphon lomentaria. Methanol treatment appeared most effective in precipitation isolation of protein from water extracts whereas pH control method did not so beneficial. The precipitation rate of protein was particularity higher in the extract of Sargassum confusum ana the lowest was makted from the extract of Sargassum thunbergii.