• 드라이브 ㆍ 컨트롤
• /
• 제17권1호
• /
• pp.27-36
• /
• 2020

The aim of this study is to design a simulation model for an electric All-Wheel-Drive (AWD) tractor to evaluate the performance of the selected component and agricultural work ability. The electric AWD tractor consists of four motors independently for each drive wheel, and each motor is combined with an engine generator, a battery pack, and reducers. The torque data of a 78 kW-class tractor was measured during plow tillage and driving operation to develop a workload cycle. A simulation model was developed by using commercial software, Simulation X, and it used the workload as the simulation condition. As a result of simulation analysis, the drive system, including an electric motor and reducers, was able to cope with high load during plow tillage. The SOC (State of Charge) level was influenced by the output power of the motor, and it was maintained in the range of 50~80%. The fuel consumed by the engine was about 18.23 L during working on a total of 8 fields. The electric AWD tractor was able to perform agricultural work for about 7 hours. In the future study, the electric AWD tractor will be developed reflecting the simulation condition. Research on the comparison between the simulation model and the electric AWD tractor should be performed.

• 복식
• /
• 제57권5호
• /
• pp.1-11
• /
• 2007

The purpose of this study was to analyze and minimize structural error between sample knitting and actual knitting in weft knitting apparel. Basic stitches used in this study were plain stitch, $0{\times}0$ rib stitch, $1{\times}1$ rib stitch, $2{\times}2$ rib stitch, Milan rib stitch. They were knitted into two different gauges(7 and 12 gauge) and 6 different sample sizes by computer program. The weight, length and width of these 5 basic knitting stitches were measured and their changes according to gauge, stitch and knitting were calculated and analyzed. The results were as follows; The weight of $0{\times}0$ rib stitch was the largest, followed by Milan rib stitch, $2{\times}2$ rib stitch, plain stitch and $1{\times}1$ rib stitch. As the density of stitch per unit area increases, the weight increases. The length of $0{\times}0$ rib stitch was the largest, followed by plain stitch, $2{\times}2$ rib stitch, $1{\times}1$ rib stitch and Milan stitch in both 7 and 12 gauge. As the number of course increases, the length increases accordingly. However, its increase ratio shows higher than that of number of course. It means that the reduction in number of course is needed to get aimed length. The width of Milan rib stitch was the largest, followed by $0{\times}0$ rib stitch, plain stitch, $2{\times}2$ rib stitch, $1{\times}1$ rib stitch in 7 gauge. In 12 gauge, Milan stitch, plain stitch and $0{\times}0$ rib stitch were the highest, followed by $2{\times}2$ rib stitch and $1{\times}1$ rib stitch. It showed that the change in shape of stitch influenced on the width more than the length of stitch.

• 한국식품영양학회지
• /
• 제22권2호
• /
• pp.261-271
• /
• 2009

Deep sea water exists at depths of over 200m under the sea. As no sunlight reaches it, photosynthesis does not take place within it, and it contains no organic matter. In addition, its temperature is maintained at a stable low level throughout the year, so it does not get mixed with the sea water on the surface. It contains a large amount of nutritious salts, whose cleanness is maintained. It is a marine resource that has matured for a long period of time. Research into deep sea water, which started in the 1970s, has been made around the whole world, including the USA and Japan. In Korea, research has been active in this area since 2000. As there has been a good amount of research into industrial applications for deep sea water, since 1993, patents for the relevant technologies have been applied. This paper intends to provide a resource to researchers of deep sea water, by summarizing of all domestic deep sea water-related patents applied with Korean Intellectual Property Office from 1993 to 2008. This research was conducted using a computer and KIPRIS Database owned by the Korea Institute of Patent Information. 'Deep sea water' was used as the search keyword. A total of 222 Korean patents relating to deep sea water have been registered on the basis of IPC. Of these, 126 patents relate to the manufacturing and the treatment of foods, foodstuffs, or non-alcoholic beverages(A23L), while 50 patents relate to the production for medical, dental, or cosmetic purposes(A61K). 38 patents relate to water purification, treatment of wastewater, sewage and sludge (C02F), while 8 patents relate to fishery and farming(A01K). In summary, it was found that studies for the practical use of deep sea water have been conducted in relation to the manufacturing and the treatment of foods, foodstuffs, beverages, and cosmetics.

• 기술사
• /
• 제13권4호
• /
• pp.31-47
• /
• 1980

Since medium and small manufacturing enterprises have , played a very important role not only in national economy but also in political and social relationships all of the countries in the world have paid favorable policies and programmes for protecting and promoting this sector. In Korea main ingredients of promoting policy for this sector consist of (1) encouragement to modernize facilities and rationalize operation (2) special priority in bank loan (3) promotion of industrial cooperatives (4) prevention of infringement by large industries. However, substantial investigation for problems incurred in medium industries has revealed that unless medium industries improve and raise their technological and managerial skillfulness for themselves all other measures are useless to solve the problems. This realization has induced all of the countries to render extension services on both of technology and management to assist and support their own effort for rationalization. Also in Korea during past 20 years many technical and managerial research institutes have rendered free consultancy services to medium industries by the support of government subsidy. Among them the joint extension services project performed by the Medium Industry Bank and UNDP during 1967 and 1975 might he listed as model case because of its broad and integrated activities and participation of foreign experts. We think many precepts should be :learned from the study of this project. Korean economy is expected to develop rapidly throughout coming'80 in spite of many obstacles, tut there is an apprehension that gap in of every facet between medium and large enterprises might he deepened and enlarged. To prevent the actualization of so-called dual structure of national economy and to promote stabilized medium industries with high added value productivity which are shown in well developed countries, consultancy assistance ana extension services should be strengthened much more than ever. Fortunately in 1978 legislation of "Medium and small industry promotion act" has paved the way for the systematic achivement of consultancy and extension services which shall be integrated by the government overall program. Under new framework thoughtfull accomplishment should be undertaken considering precious precepts obtained from past experience and failure. Special attention should be given to the technical liaison officer scheme, exclusive participation of only professional institutes, strict qualification and training for consultants for the future succsseful implementation.

• 한국작물학회지
• /
• 제63권1호
• /
• pp.1-7
• /
• 2018

Information on the patterns of genetic diversity and population structure is essential for the rational use and efficient management of germplasms; accurate information aids in monitoring germplasms, and can also be used to predict potential genetic gains. In this study, we assessed genetic diversity, focusing on Korean rice accessions for theand their sustainable conserved diversity. Using DNA profiling with 12 simple sequence repeat (SSR) markers, we detected a total of 333 alleles among 2,016 accessions. The number of alleles ranged from 21 to 53, with an average of 27.8. Average polymorphism information content was 0.797, with the lowest being 0.667 and the highest 0.940. CA cluster analysis and the model-based population structure revealed two main groups that could be subdivided into five subgroups. Analysis of the molecular variance study based on the SSR profile data showed 5% variance among the profiles, whereas we recorded 93% variance among individuals and 2% variance within individuals. Specifically, the utilized diversity for of the breeding program is restricted in that cultivars were located in limited clades. These results revealed that preserving the diversity of Korean landraces could be useful sources for breeding new rice cultivars, and cwould be the basis for the sustainable conservation and utilization of a Korean rice germplasm.

• 환경영향평가
• /
• 제16권6호
• /
• pp.447-465
• /
• 2007

The purpose of this study is to assess the sustainability in 45 cities of all over Gyeongnam and Gyeongbuk using weights and assessment system developed in leading research. The materials of assessment used statistical data and spatial data were standardized for the systematic result. The assessment score was established using the normal distribution from 25 to 125 for removal of the very smallest and maximum value. According to the results, Tongyeong was assessed the highest by 82.5 score in environmental sustainability index. In economical sustainability index, Pohang, Gumi, Changwon, Yangsan were more than 79 score but Busan, Daegu, Andong were less than 70 score. Ulsan, Geoje, Yangsan were assessed higher in society-institutional sustainability index and Jinju, Munkyeong, Changnyeong were showed higher than other cities by more 79 score in quality of life(QOL)'s sustainability index. In case of integrated sustainability index, Jinju that was the highest sustainability in QOL was assessed by first city. However, Ulsan was assessed the lowest city among others. Therefore cities which have high sustainability will prepare a politic investment program for maintaining current conditions. Cities which have low sustainability will grasp closely the environmental characteristics of urban and present the improvement direction through monitoring continuously. Overall, these results can be used as tools to assess the current cities and predict the future one. It is also necessary to establish a systematic urban planning for livable and sustainable city.

• 한국터널지하공간학회 논문집
• /
• 제15권3호
• /
• pp.345-356
• /
• 2013

본 연구에서는 SPH(Smoothed Particle Hydrodynamics) 코드를 사용하여 TBM에 장착되는 디스크커터에 의한 암석의 절삭과정을 모사하였다. 이를 위하여 본 연구에서는 3차원 FEM 해석 상용프로그램인 AUTODYN3D를 사용하였으며 이를 통해 국내 황등화강암을 대상으로 총 25개의 절삭조건에 대한 수치적인 절삭시험을 수행하였다. 암석과 디스크커터를 각각 라그란지안 솔버와 SPH 솔버를 사용하여 3차원 형상으로 모델링 하고 두 개의 디스크커터가 순차적으로 암석을 절삭하도록 모델링 하였다. 수치해석과 LCM시험에서 측정한 디스크커터의 작용력은 오차 10%이내의 값을 보여 대체로 일치하는 것으로 나타났고 균열의 전파양상과 암석의 파쇄양상 또한 유사한 것으로 나타났다. 또한 절삭된 최적 커터간격을 측정한 결과 LCM시험 결과와 일치하였다. 이를 통해 SPH코드를 사용한 수치해석기법의 적용성을 확인할 수 있었으나 해석시간을 단축하기 위한 Lagrange-SPH코드의 커플링에 관한 후속연구가 필요할 것으로 판단되었다.

• 한국정보통신학회논문지
• /
• 제20권3호
• /
• pp.639-646
• /
• 2016

본 연구에서는 특수한 상황(미끄러짐 발생 및 회전관성이 부하로 작용하는 경우)에서의 회전 엔코더 기반 측정방법의 단점을 극복하기 위하여 광 변위센서(ADNS-9500)를 사용한 비접촉식 변위 측정방법을 제안하였다. 정확한 변위 측정을 위해 데이터 수집 보드와 랩뷰를 활용하여 실험적으로 광 변위센서의 성능을 분석하였으며, 반복실험을 통해 실험조건(측정방향, 속도, 가속도, 높이, 표면 재질)에 따른 광 변위센서의 성능특성을 파악하였다. 성능실험 결과, 광 변위센서를 사용하여 정확하게 평면운동을 측정하기 위해서는 광 변위센서와 지면(대상 물체의 표면)과의 높이를 2.4 mm-3.2 mm로 일정하게 유지시켜야 하며, 각각의 축 방향, 속도, 표면 재질을 고려하여 민감도를 수정하여 변위 계산식에 적용해야 하는 것을 확인하였다.

• 치위생과학회지
• /
• 제14권4호
• /
• pp.455-460
• /
• 2014

본 연구는 시중에 널리 사용되는 치과용 모형재 중 Type IV 석고와 스캔전용 석고를 이용하여 작업모형을 제작한 후 표면조도를 측정하여 각 실험군별 차이를 확인하였으며, 3D observation and analysis를 통하여 치과용 석고의 표면을 관찰하였다. 제한된 조건 하에서 수행된 본 연구에서 다음과 같은 결과를 산출하였다. 실험 결과, 스캔전용 석고가 Type IV 석고에 비해 우수한 표면조도를 보였으며, 이는 통계적으로 유의하였다(p<0.05). 또한 디지털 전자 현미경의 multi-focus를 이용하여 20배율로 분석한 결과도 스캔전용 석고가 더욱 고른 표면이 관찰되었다. 하지만 본 연구결과를 토대로 임상적 효용성을 평가하기에는 일정 정도의 한계를 내포한다. 차후에는 보다 심층적인 비교분석과 치과 CAD/CAM을 이용한 보철물 제작에 연관된 연구가 뒷받침되어야 할 것으로 생각된다.

• 한국언론정보학보
• /
• 제80권
• /
• pp.143-166
• /
• 2016

본 연구는 미래 새로운 경쟁력으로서의 빅데이터의 가치가 개인의 인권을 침해하면서 우선시 되어서는 안 된다는 전제하에서 온라인 이용자의 개인정보 노출에 대한 인식과 보호 태도를 알아보았다. 주요 분석결과는 다음과 같다. 첫째, 개인정보 활용주체에 대한 신뢰와 개인정보 노출에 대한 심리적 반발이 개인정보 노출 방법과 유형에 따라 다름을 확인하였다. 둘째, 개인정보 노출에 대한 심리적 반발이 강할수록, 인적 개인정보 노출이 많을수록 개인정보 보호 규제에 대한 태도는 강경했다. 한편, 사람들이 개인정보 활용주체가 개인이나 기업일수록, 금융 정보의 노출이 많은 사람일수록 개인정보 보호 규제에 대한 태도는 상대적으로 소극적이었다. 이들은 온라인상에서 공개한 자신에 관한 정보를 법의 테두리 안에서 보호받기 위해 자기정보에 대한 권리를 강화하고 자율적으로 관리하고자 하는 경향을 엿볼 수 있겠다.