• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.140-147
• /
• 2019

The purpose of this study is to find biomechanical parameters for optimal shoes production through an ergonomic usability assessment of five existing types of shoes preferred by B-BOY. Ten experts and ten non-experts participated in the experiment, and 12 infrared cameras (Qualis, Oqus), force plate (Kistler, 9286AA) and foot pressure plate (Zebris Gmbh, Zebris PDM-System) were used to obtain the data. The results of the study are as follows. First, P shoes with a friction coefficient of 0.38 and a free moment of 0.32 N/m/kg are desirable in terms of traction capability and safety. Second, on the cushion, it was found that the N shoes 2.51 N, sec/kg and non-expert, and 2.86 N and sec/kg were suitable. Third, it is deemed appropriate for C shoes with a forefoot average pressure of 10.11 KPa (right), 10.05 KPa (left), and V shoes with a rearfoot average pressure of 8.4 KPa (right) and 8.36 KPa (left). In conclusion, the combination of the structure and material of V shoes should be developed for traction and stability, N shoes for cushion, and walking balance for C and V shoes.

• International Journal of Safety
• /
• v.5 no.1
• /
• pp.5-9
• /
• 2006

The present study reports on the results of a risk survey of machinery safety at a shoe factory in Qingdao, China. The aim is to decrease industrial accidents and increase worker job satisfaction by searching for a change from a trend analysis and making improvements in problem areas. The first risk survey for machinery safety was carried out in April 2005. Based on the analysis of the survey results, machinery safety devices was installed in the factory by using CATlA V5. Also, we investigated job satisfaction concerning working apparatus and work tool improvement in a questionnaire about the working environment. The second survey of machinery safety was carried out in September 2005. We are in the process of comparing the first survey results with the second survey results in order to analyze decreasing trend in industrial accidents and improvement in job satisfaction. So far the data have shown improved short-term turnover and absenteeism. It means CATIVA V5 and CFR has had positive effect regarding safety in shoe manufacture industry. The survey with CATIVA V5 and CFR will be expanded to other East-Asian countries including Vietnam. The hope is that the present approach could make a significant contribution toward improved safety.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.153-160
• /
• 2013

The purpose of this study was to compare biomechanical factors on badminton shoes between anti-slip outsole and non anti-slip outsole. Six subjects participated in this experiment. For three-dimensional analysis, eight cameras (Oqus 3series, Qualisys) were used to acquire raw data, and then the parameters were calculated and analyzed with Visual-3D. In conclusion, the patterns of spent time during side step, and maximum velocities of CoGs were consistent without joint angles of lower extremities in spite of small differences. Those of GRFs, and moment of lower extremities were absolutely consistent. This trend of biomechanical factors was that Y shoe (ante-treatment) was much greater and PS shoe (treatment) was greater than Y shoe (treatment). (That was, Y shoe (ante-treatment) > PS shoe (treatment) >Y shoe (treatment)). The findings of this study showed that anti-slip outsole was effective and brought increasing performance and decreasing injuries. It is suggested that further study of these phenomena will help understand many aspects of human locomotion, including work, performance, fatigue and possible injuries.

• Journal of the Korea Institute of Construction Safety
• /
• v.2 no.1
• /
• pp.16-20
• /
• 2019

About 50% of disasters occurring at domestic construction sites are caused by the accidents not wearing personal protective equipment. Under the current statutes, employers are required to provide personal protective equipment and workers are required to wear personal protective equipment. However, there is insufficient compliance with wearing personal protective equipment on site. This study is about the measure of improving the system to the way of purchasing, wearing and managing personal protective equipment by individual workers, and refunding the cost of personal protective equipment to workers. It is expected that this thesis will improve the system of personal protective equipment effectively, and contribute to the prevention of disasters by settling the culture of wearing personal protective equipment.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.3
• /
• pp.182-194
• /
• 2009

This study was conducted to evaluate health status and to propose health protection measures of irregular plant construction workers in Yoesu National Industrial Complex (YNIC). The status of safety and health management was examined in five areas including safety and health education, work environment monitoring, health examination, health management record, and personal protective equipment (PPE) for plant construction workers. The safety training rate for plant construction workers was reached high at 91%, The training was mostly consisted of safety accident related things, but training on hazardous materials was found to be insufficient. Workplace monitoring results showed that the compliance rate for work environment for irregular construction workers was 54% and workplace monitoring during turnaround (TA) period with high risk of exposure to hazardous agents has not been implemented. While 61.4% of irregular workers received the general health examination but only 36.8% received the special health examination. The special health examination was found to be conducted only upon welders from 2-3 years ago. The issue of health management record upon irregular construction workers was not being implemented. In case of PPE, basic safety protective equipments such as safety shoes, safety belt, safety helmet were being supplied well while the supply rate of respirator for organic vapor was relatively low at 40%. Based on this study, two suggestions to maximize the utilization of the current safety and health program were made while boosting its effectiveness in protecting workers' health. First, the role of owners (petrochemical plant) related to safety and health should be strengthened. Second, in consideration of the characteristics of construction workers who usually engage in short term employment and frequent movement, community based health management organization is suggested that can overcome such structural problem and carry out the implementation of health examination and sustained health management.

• The Safety technology
• /
• no.168
• /
• pp.18-19
• /
• 2011

1969년 한국 최초의 Chemical Shoes 공장을 설립한 (주}화승인더스트리. 그로부터 20여년 후인 1990년 화승은 또 한 번의 도전을 시작했다. BOPP 필름사업으로 업종을 변경한 것. 업계는 무모한 도전이라며 우려의 시선을 보냈다. 하지만 (주)화승인더스트리는 그간 축적된 경험과 기술을 기반으로 보란 듯이 승승장구를 거듭했다. 1993년 국내 최초로 통기성 필름사업을 시작한 이래 1995년 신규라인 확장, 1997년 BOPET 필름사업 진출 등 거침없는 성장을 이어간 것이다. 그리고 그 결과, 이제는 누구나 인정하는 국내 최고의 종합필름기업으로 우뚝 올라섰다. 이같은 (주)화승인더스트리의 성공 배경은 무엇일까? 그것은 안전과 환경을 중시하는 이곳의 경영방침에서 찾을 수 있다. 이곳은 다양한 안전활동을 지속적으로 펼쳐나가는 가운데 환경경영시스템인 ISO14001 인증을 획득하는 등 우수안전기업, 친환경기업을 향한 노력을 멈추지 않았다. 기업 스스로가 근로자들의 안전 그리고 지역의 환경을 우선시하면서 관련 업계와 소비자들에게 신뢰할 수 있는 기업이라는 인식을 심어줄 수 있었던 것이다. 빈틈없는 안전관리로 (주)화승인더스트리의 지속적인 발전을 이끌고 있는 이곳의 안전관리자 나창식 차장을 만나봤다.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.4
• /
• pp.161-166
• /
• 2009

Although the entrance of house has been identified as a hotspot for older adults' fall accidents, there was not any lift chair to prevent older adults' accidents. In this study, a lift chair was developed to reduce fall accidents that can occur when older adults put on or take off their shoes in the entrance. In order to develop the product, we considered two aspects. Firstly, we considered older adults' anthropometric data to determine the design specification of the product. Also we considered the environmental characteristics of space using the product. In order to overcome the limited spatial freedom and use the entrance space effectively, we took a simplified and folding type for the product.

• Safety and Health at Work
• /
• v.9 no.1
• /
• pp.17-24
• /
• 2018

Background: Increasing the slip resistance of floor surfaces would be desirable, but there is a lack of evidence on whether traction properties are linearly correlated with the topographic features of the floor surfaces or what scales of surface roughness are required to effectively control the slipperiness of floors. Objective: This study expands on earlier findings on the effects of floor surface finishes against slip resistance performance and determines the operative ranges of floor surface roughness for optimal slip resistance controls under different risk levels of walking environments. Methods: Dynamic friction tests were conducted among three shoes and nine floor specimens under wet and oily environments and compared with a soapy environment. Results: The test results showed the significant effects of floor surface roughness on slip resistance performance against all the lubricated environments. Compared with the floor-type effect, the shoe-type effect on slip resistance performance was insignificant against the highly polluted environments. The study outcomes also indicated that the oily environment required rougher surface finishes than the wet and soapy ones in their lower boundary ranges of floor surface roughness. Conclusion: The results of this study with previous findings confirm that floor surface finishes require different levels of surface coarseness for different types of environmental conditions to effectively manage slippery walking environments. Collected data on operative ranges of floor surface roughness seem to be a valuable tool to develop practical design information and standards for floor surface finishes to efficiently prevent pedestrian fall incidents.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.3
• /
• pp.17-24
• /
• 2006

In this paper, we propose a stress analysis on foot by lifting task attitudes. Maximum force and peak pressure were measured on 8 body regions by Pedar system in order to analysis the stress which is affected by task style and angle on foot when Manual Materials Handling task. As for the peak pressure of the whole foot as to the task height during the lifting task, the height from Knuckle to Shoulder was the least in the peak pressure. Also, as for the maximum force and the peak pressure of the whole foot as to the task angle during the lifting task, it could be seen that the more an angle increases, the stress influencing on a foot jumps. As for the maximum force and the peak pressure by foot region as to the task height in case of the lifting task, the height from Knuckle to Shoulder is indicated the smallest value in the maximum force and the peak pressure, thus there is necessary to attain the work design that considered this. Also, as for the maximum force by foot region as to the task angle in case of the lifting task, 0° tasking is indicated to be least, thus there is necessity to be attained the tasking design in a bid to prevent the existence of an angle. The results of this paper are thought to be helpful to the suitable work design, to the prevention of musculoskeletal disorders related to the lower limbs, and to the design of ergonomic safety shoes.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.87-98
• /
• 1999

The objectives of this study were to evaluate exposures to airborne methylene chloride and postshift carboxyhemoglobin (COHb) in blood of workers engaged in processes using blowing or cleaning agents, and to investigate correlation between methylene chloride concentrations and the blood COHb levels of workers. The geometric mean (GM) of workers' exposures (8 hour-time weighted averages, TWA) to airborne methylene chloride during cleaning molds using rags wetted with the solvent in the manufacture of flexible polyurethane foam (GM = 61.4 ppm), during operating the dip tank for cleaning molds in the manufacture of lens (GM = 61.0 ppm), and during cleaning the blowing nozzles by spraying the solvent in the manufacture of shoes (GM = 117.2 ppm) were exceeded the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value ($TLV^{(R)}$)-Time Weighted Average (TWA) (50 ppm). The COHb levels were significantly different among groups (p<0.05). The average COHh levels in blood of non-smoking workers were 2.0% in. low-level (<50 ppm) exposure group, and 3.9 % in high-level (>50ppm) exposure group. The average COHb levels in smoking workers were 3.1% in low-level exposure group, and 4.8% in high-level exposure group. The blood COHb levels of no-exposed workers to methylene chloride were 1.8% in non-smoking group, and 2.8% in smoking group. It was found that the COHb level dependeds on the methylene chloride concentration and smoking habit, and was highly correlated with methylene chloride concentration in air. The correlation coefficient was 0.81 among non-smoking workers. The estimated COHb level (3.6%) and 95% upper confidence limit (4.0%) corresponding to TLV-TWA of methylene chloride exceeded the current ACGIH Biological Exposure Index (COHb 3.5%) for carbon monoxide. The estimated COHb level (5.4%) at 100 ppm exceeded the standard (5%) recommended by National Institute for Occupational Safety and Health (NIOSH) for preventing adverse cardiovascular effect. The estimated COHb value and 95% upper confidence limit at 25 ppm of the Occupational Safety and Health. Adminstration (OSHA) Permissible Exposure Limit-TWA (PEL-TWA) were 2.6% and 3.0%, respectively. It is suggested that COHb in blood be kept below 3.0% to comply with OSHA PEL-TWA.